FM 355-2 temperature controller module . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на FM 355-2 temperature controller module

| | | | | | |

Article number	6ES7355-2CH00-0AE0	6ES7355-2SH00-0AE0
	TEMPERATURE CONTROL MOD. FM355-2C	SIMATIC S7-300, TEMPERATURE
Supply voltage
Load voltage L+
в—Џ Rated value (DC)	24 V	24 V
в—Џ permissible range, lower limit (DC)	20.4 V	20.4 V
в—Џ permissible range, upper limit (DC)	28.8 V	28.8 V
Input current
from load voltage L+ (without load), max.	310 mA; Typ. 260 mA	270 mA; typ. 220 mA
from backplane bus 5 V DC, max.	75 mA; typ. 50 mA	75 mA; typ. 50 mA
Power loss
Power loss, typ.	6.5 W	5.5 W
Power loss, max.	7.8 W	6.9 W
Digital inputs
Number of digital inputs	8	8
Input characteristic curve in accordance with IEC 61131, type 2	Yes	Yes
Input voltage
в—Џ Rated value (DC)	24 V	24 V
в—Џ for signal "0"	-3 to +5V	-3 to +5V
в—Џ for signal "1"	13 to 30V	13 to 30V
Input current
в—Џ for signal "1", typ.	7 mA	7 mA
Cable length
в—Џ shielded, max.	1 000 m	1 000 m
в—Џ unshielded, max.	600 m	600 m
Digital outputs
Number of digital outputs		8
Short-circuit protection		Yes; Electronic
Limitation of inductive shutdown voltage to		L+ (-1.5 V)
Controlling a digital input		Yes
Switching capacity of the outputs
в—Џ on lamp load, max.		5 W
Load resistance range
в—Џ lower limit		240 в„¦
в—Џ upper limit		4 kв„¦
Output voltage
в—Џ for signal "1", min.		L+ (-2.5 V)
Output current
в—Џ for signal "1" rated value		0.1 A
в—Џ for signal "1" permissible range for 0 to 60 °C, min.		5 mA
в—Џ for signal "1" permissible range for 0 to 60 °C, max.		150 mA
в—Џ for signal "0" residual current, max.		0.5 mA
Parallel switching of two outputs
в—Џ for logic links		Yes
Switching frequency
в—Џ with resistive load, max.		100 Hz
в—Џ with inductive load, max.		0.5 Hz
в—Џ on lamp load, max.		100 Hz
Total current of the outputs (per group)
all mounting positions
вЂ” up to 60 °C, max.		400 mA
Cable length
в—Џ shielded, max.		1 000 m
в—Џ unshielded, max.		600 m
Analog inputs
Number of analog inputs	4	4
permissible input voltage for voltage input (destruction limit), max.	20 V	20 V
permissible input current for current input (destruction limit), max.	40 mA	40 mA
Input ranges
в—Џ Voltage	Yes	Yes
в—Џ Current	Yes	Yes
в—Џ Thermocouple	Yes	Yes
в—Џ Resistance thermometer	Yes	Yes
Input ranges (rated values), voltages
в—Џ 0 to +10 V	Yes	Yes
в—Џ Input resistance (0 to 10 V)	100 kв„¦	100 kв„¦
в—Џ -1.75 V to +11.75 V	Yes	Yes
в—Џ Input resistance (-1.75 V to +11.75 V)	100 kв„¦	100 kв„¦
Input ranges (rated values), currents
в—Џ 0 to 20 mA	Yes	Yes
в—Џ Input resistance (0 to 20 mA)	50 в„¦	50 в„¦
в—Џ 0 to 23.5 mA	Yes	Yes
в—Џ Input resistance (0 to 23.5 mA)	50 в„¦	50 в„¦
в—Џ -3.5 mA to +23.5 mA	Yes	Yes
в—Џ Input resistance (-3.5 mA to +23.5 mA)	50 в„¦	50 в„¦
в—Џ 4 mA to 20 mA	Yes	Yes
в—Џ Input resistance (4 mA to 20 mA)	50 в„¦	50 в„¦
Input ranges (rated values), thermocouples
в—Џ Type B	Yes	Yes
в—Џ Input resistance (Type B)	10 Mв„¦	10 Mв„¦
в—Џ Type E	Yes	Yes
в—Џ Input resistance (Type E)	10 Mв„¦	10 Mв„¦
в—Џ Type J	Yes	Yes
в—Џ Input resistance (type J)	10 Mв„¦	10 Mв„¦
в—Џ Type K	Yes	Yes
в—Џ Input resistance (Type K)	10 Mв„¦	10 Mв„¦
в—Џ Type R	Yes	Yes
в—Џ Input resistance (Type R)	10 Mв„¦	10 Mв„¦
в—Џ Type S	Yes	Yes
в—Џ Input resistance (Type S)	10 Mв„¦	10 Mв„¦
Input ranges (rated values), resistance thermometer
в—Џ Pt 100	Yes	Yes
в—Џ Input resistance (Pt 100)	10 Mв„¦	10 Mв„¦
Thermocouple (TC)
Temperature compensation
вЂ” internal temperature compensation	Yes	Yes
вЂ” external temperature compensation with Pt100	Yes	Yes
Characteristic linearization
в—Џ parameterizable	Yes	Yes
вЂ” for thermocouples	Type B, E, J, K, R, S	Type B, E, J, K, R, S
вЂ” for resistance thermometer	Pt100 (standard)	Pt100 (standard)
Cable length
в—Џ shielded, max.	200 m; 50 m at 80 mV and thermocouples	200 m; 50 m at 80 mV and thermocouples
Analog outputs
Number of analog outputs	4
Voltage output, short-circuit protection	Yes
Voltage output, short-circuit current, max.	25 mA
Current output, no-load voltage, max.	18 V
Output ranges, voltage
в—Џ 0 to 10 V	Yes
в—Џ -10 V to +10 V	Yes
Output ranges, current
в—Џ 0 to 20 mA	Yes
в—Џ 4 mA to 20 mA	Yes
Connection of actuators
в—Џ for voltage output two-wire connection	Yes
в—Џ for current output two-wire connection	Yes
Load impedance (in rated range of output)
в—Џ with voltage outputs, min.	1 kв„¦
в—Џ with voltage outputs, capacitive load, max.	1 µF
в—Џ with current outputs, max.	500 в„¦
в—Џ with current outputs, inductive load, max.	1 mH
Cable length
в—Џ shielded, max.	200 m; 50 m at 80 mV and thermocouples
Analog value generation for the inputs
Measurement principle	integrating	integrating
Integration and conversion time/resolution per channel
в—Џ Resolution with overrange (bit including sign), max.	14 bit	14 bit
в—Џ Conversion time (per channel)	100 ms; At 50/60 Hz	100 ms; At 50/60 Hz
Analog value generation for the outputs
Settling time
в—Џ for resistive load	0.1 ms
в—Џ for capacitive load	3.3 ms
в—Џ for inductive load	0.5 ms
Encoder
Connection of signal encoders
в—Џ for voltage measurement	Yes	Yes
в—Џ for current measurement as 4-wire transducer	Yes	Yes
Connectable encoders
в—Џ 2-wire sensor	Yes	Yes
вЂ” permissible quiescent current (2-wire sensor), max.	1.5 mA	1.5 mA
Errors/accuracies
Linearity error (relative to input range), (+/-)	0.05 %	0.05 %
Temperature error (relative to input range), (+/-)	0.005 %/K	0.005 %/K
Linearity error (relative to output range), (+/-)	0.05 %
Temperature error (relative to output range), (+/-)	0.02 %/K
Operational error limit in overall temperature range
в—Џ Voltage, relative to input range, (+/-)	0.6 %; ±0.6 to ±0.7 %	0.06 %; ±0.06 to ±0.7%
в—Џ Current, relative to input range, (+/-)	0.6 %; ±0.6 to ±0.7 %	0.06 %; ±0.06 to ±0.7%
в—Џ Resistance thermometer, relative to input range, (+/-)	0.6 %; ±0.6 to ±0.7 %	0.06 %; ±0.06 to ±0.7%
в—Џ Voltage, relative to output range, (+/-)	0.5 %
в—Џ Current, relative to output range, (+/-)	0.6 %
Basic error limit (operational limit at 25 °C)
в—Џ Voltage, relative to input range, (+/-)	0.04 %; ±0.04 to ±0.5 %	0.04 %; ±0.04 to ±0.5 %
в—Џ Current, relative to input range, (+/-)	0.04 %; ±0.04 to ±0.5 %	0.04 %; ±0.04 to ±0.5 %
в—Џ Resistance thermometer, relative to input range, (+/-)	0.04 %; ±0.04 to ±0.5 %	0.04 %; ±0.04 to ±0.5 %
в—Џ Voltage, relative to output range, (+/-)	0.4 %
в—Џ Current, relative to output range, (+/-)	0.5 %
Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency
в—Џ Series mode interference (peak value of interference < rated value of input range), min.	40 dB	40 dB
в—Џ Common mode interference (USS < 2.5 V) , min.	70 dB	70 dB
Interrupts/diagnostics/status information
Substitute values connectable	Yes; Parameterizable	Yes; Parameterizable
Integrated Functions
Control technology
в—Џ Number of closed-loop controllers	4	4
Potential separation
Potential separation controller
в—Џ between the channels	No	No
в—Џ between the channels and backplane bus	Yes; Optocoupler	Yes; Optocoupler
Permissible potential difference
Between the inputs and MANA (UCM)	2.5 V DC	2.5 V DC
Isolation
Isolation tested with	500 V DC	500 V DC
Connection method
required front connector	2x 20-pin	2x 20-pin
Dimensions
Width	80 mm	80 mm
Height	125 mm	125 mm
Depth	120 mm	120 mm
Weights
Weight, approx.	470 g	470 g