FM 352 cam controllers . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на FM 352 cam controllers

| | | | | | | |

Article number		6ES7352-1AH02-0AE0
		FM352 ELECTRON. CAM-OPERATED CONTROL
Supply voltage
Rated value (DC)
в—Џ 24 V DC		Yes
Input current
from load voltage L+ (without load), max.		200 mA
from backplane bus 5 V DC, max.		100 mA
Encoder supply
5 V encoder supply
в—Џ 5 V		Yes
в—Џ Output current, max.		300 mA
в—Џ Cable length, max.		32 m
24 V encoder supply
в—Џ 24 V		Yes
в—Џ Output current, max.		300 mA
в—Џ Cable length, max.		100 m
Power loss
Power loss, typ.		8.1 W
Digital inputs
Number of digital inputs		4
Functions		Reference point switch, set floating actual value/length measurement, brake release, enable track output no. 3
Input voltage
в—Џ Rated value (DC)		24 V
в—Џ for signal "0"		-30 to +5V
в—Џ for signal "1"		+11 to +30V
Input current
в—Џ for signal "0", max. (permissible quiescent current)		2 mA
в—Џ for signal "1", typ.		9 mA
Digital outputs
Number of digital outputs		13
Functions		Cam track
Short-circuit protection		Yes
Output voltage
в—Џ Rated value (DC)		24 V
в—Џ for signal "1", min.		UP - 0.8 V
Output current
в—Џ for signal "1" permissible range for 0 to 60 °C, min.		5 mA; with UPmax
в—Џ for signal "1" permissible range for 0 to 60 °C, max.		600 mA; with UPmax
в—Џ for signal "0" residual current, max.		0.5 mA
Encoder
Connectable encoders
в—Џ Incremental encoder (symmetrical)		Yes
в—Џ Incremental encoder (asymmetrical)		Yes
в—Џ Absolute encoder (SSI)		Yes
в—Џ 2-wire sensor		Yes
вЂ” permissible quiescent current (2-wire sensor), max.		2 mA
Encoder signals, incremental encoder (symmetrical)
в—Џ Trace mark signals		A, notA, B, notB
в—Џ Zero mark signal		N, notN
в—Џ Input voltage		5 V difference signal (phys. RS 422)
в—Џ Input frequency, max.		1 MHz
Encoder signals, incremental encoder (asymmetrical)
в—Џ Trace mark signals		A, B
в—Џ Zero mark signal		N
в—Џ Input voltage		24 V
в—Џ Input frequency, max.		50 kHz; 50 kHz for 25 m cable length; 25 kHz for 100 m cable length
Encoder signals, absolute encoder (SSI)
в—Џ Data signal		DATA, notDATA
в—Џ Clock signal		CL, notCL
в—Џ Telegram length, parameterizable		13 or 25 bit
в—Џ Clock frequency, max.		1 MHz
в—Џ Gray code		1
в—Џ Cable length, shielded, max.		320 m; at max. 125 kHz
Potential separation
Potential separation digital inputs
в—Џ Potential separation digital inputs		No
Potential separation digital outputs
в—Џ Potential separation digital outputs		No
Degree and class of protection
Degree of protection acc. to EN 60529
в—Џ IP20		Yes
Ambient conditions
Ambient temperature during operation
в—Џ min.		0 °C
в—Џ max.		60 °C
Ambient temperature during storage/transportation
в—Џ min.		-40 °C
в—Џ max.		70 °C
Connection method
required front connector		1x 20-pin
Dimensions
Width		80 mm
Height		125 mm
Depth		120 mm
Weights
Weight, approx.		550 g