F digital input modules . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на F digital input modules

| | | | |

Article number		6ES7526-1BH00-0AB0
		ET 200MP, F-DI 16X24VDC
General information
Product type designation		F-DI 16x24VDC
Firmware version
в—Џ FW update possible		Yes
Product function
в—Џ I&M data		Yes; I&M0 to I&M3
Engineering with
в—Џ STEP 7 TIA Portal configurable/integrated as of version		V13 SP1 with HSP 0086
Operating mode
в—Џ DI		Yes
Supply voltage
Rated value (DC)		24 V
permissible range, lower limit (DC)		19.2 V
permissible range, upper limit (DC)		28.8 V
Reverse polarity protection		Yes
Input current
Current consumption (rated value)		50 mA
Encoder supply
Number of outputs		4
Short-circuit protection		Yes; Electronic (response threshold 0.7 A to 1.8 A)
24 V encoder supply
в—Џ 24 V		Yes; min. L+ (-1.5 V)
в—Џ Short-circuit protection		Yes
в—Џ Output current, max.		300 mA; Max. 100 mA when mounted vertically
Power
Power available from the backplane bus		0.9 W
Power loss
Power loss, typ.		4.6 W
Address area
Address space per module
в—Џ Address space per module, max.		9 byte
Hardware configuration
Automatic encoding		Yes
в—Џ Electronic coding element type F		Yes
Digital inputs
Number of digital inputs		16
Source/sink input		Yes; P-reading
Input characteristic curve in accordance with IEC 61131, type 1		Yes
Input voltage
в—Џ Type of input voltage		DC
в—Џ Rated value (DC)		24 V
в—Џ for signal "0"		-30 to +5V
в—Џ for signal "1"		+15 to +30V
Input current
в—Џ for signal "1", typ.		3.7 mA
Input delay (for rated value of input voltage)
for standard inputs
вЂ” parameterizable		Yes
вЂ” at "0" to "1", min.		0.4 ms
вЂ” at "0" to "1", max.		20 ms
вЂ” at "1" to "0", min.		0.4 ms
вЂ” at "1" to "0", max.		20 ms
Cable length
в—Џ shielded, max.		1 000 m
в—Џ unshielded, max.		500 m
Interrupts/diagnostics/status information
Diagnostics function		Yes
Alarms
в—Џ Diagnostic alarm		Yes
в—Џ Hardware interrupt		No
Diagnostic messages
в—Џ Monitoring the supply voltage		Yes
в—Џ Wire-break		No
в—Џ Short-circuit		Yes
в—Џ Group error		Yes
Diagnostics indication LED
в—Џ RUN LED		Yes; Green LED
в—Џ ERROR LED		Yes; Red LED
в—Џ Channel status display		Yes; Green LED
в—Џ for channel diagnostics		Yes; Red LED
в—Џ for module diagnostics		Yes; Red LED
Potential separation
Potential separation channels
в—Џ between the channels and backplane bus		Yes
Permissible potential difference
between different circuits		75 V DC/60 V AC (base isolation)
Isolation
Isolation tested with		707 V DC (type test)
Ambient conditions
Ambient temperature during operation
в—Џ horizontal installation, min.		0 °C
в—Џ horizontal installation, max.		60 °C
в—Џ vertical installation, min.		0 °C
в—Џ vertical installation, max.		40 °C
Dimensions
Width		35 mm
Height		147 mm
Depth		129 mm
Weights
Weight, approx.		280 g