F digital input module . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на F digital input module

| | | | |

F digital input module

Article number		6ES7526-1BH00-0AB0
		ET 200MP, F-DI 16X24VDC
General information
Product type designation		F-DI 16x24VDC
Product function
? I&M data		Yes; I&M0 to I&M3
Engineering with
? STEP 7 TIA Portal configurable/integrated as of version		V13 SP1 with HSP0086
Operating mode
? DI		Yes
Supply voltage
Type of supply voltage		24 V DC
Rated value (DC)		24 V
Reverse polarity protection		Yes
Encoder supply
Number of outputs		4
Short-circuit protection		Yes; Electronic (response threshold 0.7 A to 1.8 A)
24 V encoder supply
? 24 V		Yes; min. L+ (-1.5 V)
? Short-circuit protection		Yes
? Output current, max.		300 mA; Max. 100 mA when mounted vertically
Digital inputs
Number of digital inputs		16
Source/sink input		Yes; P-reading
Input characteristic curve in accordance with IEC 61131, type 1		Yes
Input voltage
? Type of input voltage		DC
? Rated value (DC)		24 V
? for signal "0"		-30 to +5V
? for signal "1"		+15 to +30V
Input current
? for signal "1", typ.		3.7 mA
Input delay (for rated value of input voltage)
for standard inputs
— parameterizable		Yes
Cable length
? shielded, max.		1 000 m
? unshielded, max.		500 m
Interrupts/diagnostics/status information
Diagnostics function		Yes
Alarms
? Diagnostic alarm		Yes
? Hardware interrupt		No
Diagnostic messages
? Monitoring the supply voltage		Yes
? Wire-break		No
? Short-circuit		Yes
? Group error		Yes
Diagnostics indication LED
? RUN LED		Yes; Green LED
? ERROR LED		Yes; Red LED
? Channel status display		Yes; Green LED
? for channel diagnostics		Yes; Red LED
? for module diagnostics		Yes; Red LED
Potential separation
Potential separation channels
? between the channels and backplane bus		Yes
Isolation
Isolation tested with		707 V DC (type test)
Standards, approvals, certificates
Suitable for safety functions		Yes
Highest safety class achievable in safety mode
? Performance level according to ISO 13849-1		PLe
? SIL acc. to IEC 61508		SIL 3
Probability of failure (for service life of 20 years and repair time of 100 hours)
— Low demand mode: PFDavg in accordance with SIL3		< 5.00E-05
— High demand/continuous mode: PFH in accordance with SIL3		< 1.00E-09 1/h
Ambient conditions
Ambient temperature during operation
? horizontal installation, min.		0 °C
? horizontal installation, max.		60 °C
? vertical installation, min.		0 °C
? vertical installation, max.		40 °C
Dimensions
Width		35 mm
Height		147 mm
Depth		129 mm
Weights
Weight, approx.		280 g