19" rack unit

• 19" rack unit with 3 height units (HU) for installation
  • in hinged frames
  • in cabinets
• Gas connections directly on the analyzer module for sample gas inlet and outlet: for pipe diameter 6 mm
• Purging gas connections (optional), purging gas connection for 6 mm or 1/4" hose (optional)
• ATEX-/IECEx approval for Zone 2

Wall-mounted device

• Gas connections directly on the analyzer module for sample gas inlet and outlet: Pipe union for pipe diameter 6 mm
• Purging gas connections (optional): Pipe diameter 12 mm
• ATEX-/IECEx approval for Zones 1 and 2

Field device

• Field control unit: Flameproof encapsulated enclosure with mounted Ex e connection enclosure (IP55)
• Ex-d field module with installed module (IP65)
• ATEX-/IECEx approval for Zone 1
• Maximum cable length of the cable between field module and field control unit: 7 m

Display and control panel

• LCD panel for simultaneous display of:
  • Measured value
  • Status bar
  • Measuring ranges
• Menu-driven operation for parameterization, test functions, adjustment
• Operator support in plain text
• Operating software in six languages (English, German, French, Italian, Spanish, Portuguese)

Display and operator panel of the SIPROCESS GA700 devices

Inputs and outputs

• 19" rack unit and wall-mounted unit
  • 8 digital inputs, designed for 24 V, floating, freely configurable (e.g. for measurement range switchover, processing of external signals from sample preparation)
  • 8 relay outputs, with changeover contacts, freely configurable (e.g. for faults, maintenance requests, limit alarms, external solenoid valves)
  • Ethernet connection contained in the basic unit (connection on the rear side, Ethernet RJ 45, 100 MBit)
  • Service interface (front side); Ethernet RJ 45, 100 MBit.
• Field control unit
  • 1 analog output for each component 0/4 to 20 mA
  • 5 relay outputs, with changeover contacts, freely configurable, e.g. for faults or measuring range identification
  • 5 digital inputs, designed for 24 V, floating, freely configurable, e.g. for measurement range switchover

Interface modules

• 19" rack unit and wall-mounted unit
  • Interface module 1.1:
    12 relay outputs and 8 digital inputs
  • Interface module 2.1:
    1 analog output for each measuring component (0/4 to 20 mA or configurable according to NAMUR), plus 3 relay outputs for each module
  • Interface module 2.2:
    One analog output for each measured component (0/4 to 20 mA or configurable according to NAMUR), 4 analog inputs and 4 digital inputs
• Field control unit
  • Interface module 2.2:
    4 analog inputs 0/4 to 20 mA