Analog output module with HART . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на Analog output module with HART

| | | | | |

Article number		6ES7332-8TF01-0AB0
		SM332, 8AO, 0/4 - 20MA HART
Supply voltage
Load voltage L+
в—Џ Rated value (DC)		24 V
в—Џ Reverse polarity protection		Yes
Input current
from load voltage L+ (without load), max.		350 mA
from backplane bus 5 V DC, max.		110 mA
Power loss
Power loss, typ.		6 W
Analog outputs
Number of analog outputs		8
Current output, no-load voltage, max.		24 V
Output ranges, current
в—Џ 0 to 20 mA		Yes
в—Џ -20 mA to +20 mA		No
в—Џ 4 mA to 20 mA		Yes
Connection of actuators
в—Џ for current output two-wire connection		Yes
Load impedance (in rated range of output)
в—Џ with current outputs, max.		750 в„¦
в—Џ with current outputs, inductive load, max.		10 mH
Destruction limits against externally applied voltages and currents
в—Џ Voltages at the outputs towards MANA		+60/-0.5 V
Cable length
в—Џ shielded, max.		800 m
Analog value generation for the outputs
Integration and conversion time/resolution per channel
в—Џ Resolution with overrange (bit including sign), max.		16 bit
Settling time
в—Џ for resistive load		0.1 ms
в—Џ for inductive load		0.5 ms
Errors/accuracies
Output ripple (relative to output range, bandwidth 0 to 50 kHz), (+/-)		0.02 %
Linearity error (relative to output range), (+/-)		0.01 %
Temperature error (relative to output range), (+/-)		0.002 %/K
Crosstalk between the outputs, min.		70 dB
Repeat accuracy in steady state at 25 °C (relative to output range), (+/-)		0.05 %
Operational error limit in overall temperature range
в—Џ Current, relative to output range, (+/-)		0.2 %
Basic error limit (operational limit at 25 °C)
в—Џ Current, relative to output range, (+/-)		0.1 %
Isochronous mode
Isochronous operation (application synchronized up to terminal)		No
Interrupts/diagnostics/status information
Diagnostic functions		Yes
Substitute values connectable		Yes
Alarms
в—Џ Diagnostic alarm		Yes
Diagnostic messages
в—Џ Diagnostic information readable		Yes
Diagnostics indication LED
в—Џ Group error SF (red)		Yes
Potential separation
Potential separation analog outputs
в—Џ between the channels		No
в—Џ between the channels and backplane bus		Yes
в—Џ Between the channels and load voltage L+		Yes
Isolation
Isolation tested with		500 V DC
Degree and class of protection
IP degree of protection		IP20
Connection method
required front connector		20-pin
Dimensions
Width		40 mm
Height		125 mm
Depth		117 mm
Weights
Weight, approx.		220 g