SM 326 F digital output modules - Safety Integrated . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SM 326 F digital output modules

| | | | | | |

Article number	6ES7326-2BF10-0AB0	6ES7326-2BF41-0AB0
	SM326, F-DO10XDC24V/2A PP, FAILSAFE	SM 326, F-DO 8 X DC 24V/2A PM
Supply voltage
Rated value (DC)	24 V; 1L+	24 V; 1L+
Reverse polarity protection	Yes	Yes
Load voltage L+
в—Џ Rated value (DC)	24 V; 2L+, 3L+	24 V; 2L+, 3L+
в—Џ Reverse polarity protection	No	No
Input current
from supply voltage 1L+, max.	100 mA	75 mA
from load voltage 2L+ (without load), max.	100 mA	100 mA
from load voltage 3L+ (without load), max.	100 mA	100 mA
from backplane bus 5 V DC, max.	100 mA	100 mA
Power loss
Power loss, typ.	6 W	12 W
Digital outputs
Number of digital outputs	10	8
Short-circuit protection	Yes	Yes
Limitation of inductive shutdown voltage to		L+ (-33 V)
Switching capacity of the outputs
в—Џ on lamp load, max.	5 W	5 W
Output voltage
в—Џ for signal "1", min.	L+ (-1.0 V)	L+ (-1.0 V)
Output current
в—Џ for signal "1" rated value	2 A	2 A
в—Џ for signal "1" permissible range for 0 to 40 °C, min.	7 mA	7 mA
в—Џ for signal "1" permissible range for 0 to 40 °C, max.	2.4 A	2 A; 2 A for horizontal installation, 1 A for vertical installation
в—Џ for signal "1" permissible range for 40 to 60 °C, min.	7 mA	7 mA
в—Џ for signal "1" permissible range for 40 to 60 °C, max.	2.4 A	1 A; for horizontal installation
в—Џ for signal "0" residual current, max.	0.5 mA	0.5 mA
Switching frequency
в—Џ with resistive load, max.	25 Hz	30 Hz
в—Џ with inductive load, max.	25 Hz	2 Hz
в—Џ on lamp load, max.	10 Hz	10 Hz
Total current of the outputs (per group)
horizontal installation
вЂ” up to 40 °C, max.	10 A	7.5 A
вЂ” up to 60 °C, max.	6 A	5 A
vertical installation
вЂ” up to 40 °C, max.	5 A	5 A
Cable length
в—Џ shielded, max.	1 000 m	200 m; 200 m for SIL3, AK 6, Cat 4
в—Џ unshielded, max.	600 m	200 m
Interrupts/diagnostics/status information
Alarms
в—Џ Diagnostic alarm	Yes	Yes; Parameterizable
Diagnostic messages
в—Џ Diagnostic information readable	Yes	Yes
Diagnostics indication LED
в—Џ Fail-safe operation	Yes	Yes
в—Џ Group error SF (red)	Yes	Yes
Potential separation
Potential separation digital outputs
в—Џ between the channels	Yes	Yes
в—Џ between the channels, in groups of	5	4
в—Џ between the channels and backplane bus	Yes	Yes
в—Џ between the channels and the power supply of the electronics	Yes	Yes
Isolation
Isolation tested with	370V for 1 min	500 V DC/350 V AC
Highest safety class achievable in safety mode
в—Џ acc. to DIN VDE 0801	AK 5 and 6
в—Џ acc. to EN 954	Cat. 4	Cat. 4
в—Џ SIL acc. to IEC 61508	SIL 3	SIL 3
Connection method
required front connector	40-pin	40-pin
Dimensions
Width	40 mm	80 mm
Height	125 mm	125 mm
Depth	120 mm	120 mm
Weights
Weight, approx.	330 g	465 g