System components D-R 800

Measuring probe

The measuring probe of nano-treated stainless steel 1.4571 can be delivered in two lengths of approx. 400 and 800 mm (from mounting flange). A difference is made here between installation on a horizontal or vertical flue and between the German and English language. The measuring probe is firmly connected to the operating unit including display.

Supply unit with integrated purge air supply

The supply unit supplies the probe with the required signals and the supply voltage over a connecting cable 3 or 10 m in length as well as with purge air through an additional air hose.

Mounting flange 130/240/500 mm

The connection flange made of carbon steel or stainless steel 1.4571 should protrude approximately 30 mm into the channel.

Optional:

Temperature compensation through additional analog input

Using an additional analog input, the temperature of the exhaust gas can be passed to the operating unit, thus enabling calculation of the dust concentration corrected by the gas temperature.

Special material alloy 59 2.4605

As an alternative to the nano-treated stainless steel 1.4571, the probe can be manufactured from alloy 59 2.4605 (comparable to Hastelloy 2.4819).

Weather protection covers

Weather protection covers are available to protect the measuring system and the purge air unit for outdoor installation.