FM 354 positioning module . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на FM 354 positioning module

| | | | | | |

FM 354 positioning module

Order number		6ES7354-1AH01-0AE0
		Positioning control FM 354 (FM position)
Supply voltage
Rated value (DC)
? 24 V DC		Yes
Input current
Current consumption, max.		350 mA
Encoder supply
5 V encoder supply
? 5 V		Yes
? Output current, max.		220 mA
? Cable length, max.		35 m
24 V encoder supply
? 24 V		Yes
? Output current, max.		300 mA
? Cable length, max.		100 m
Power loss
Power loss, typ.		8 W
Digital inputs
Number of digital inputs		4
Functions		Reference cams, flying actual value setting, flying measurement, start/stop positioning, external block change
Input voltage
? Rated value (DC)		24 V
? for signal "0"		-3 to +5V
? for signal "1"		+11 to +30V
Input current
? for signal "0", max. (permissible quiescent current)		2 mA
? for signal "1", typ.		6 mA; 6 to 15 mA
Digital outputs
Number of digital outputs		4
Functions		Position reached: stop, axis travels forward, axis travels back, change M-function M97, change M-function M98, start enable, direct output via data record
Short-circuit protection		Yes
Output voltage
? Rated value (DC)		24 V
? for signal "1", min.		UP -3 V
Output current
? for signal "1" permissible range for 0 to 55 °C, max.		0.6 A; with UPmax
? for signal "0" residual current, max.		2 mA
Encoder
Connectable encoders
? Incremental encoder (symmetrical)		Yes
? Absolute encoder (SSI)		Yes
Encoder signals, incremental encoder (symmetrical)
? Trace mark signals		A, notA, B, notB
? Zero mark signal		N, notN
? Input signal		5 V difference signal (phys. RS 422)
? Input frequency, max.		1 MHz
Encoder signals, absolute encoder (SSI)
? Input signal		5 V difference signal (phys. RS 422)
? Data signal		DATA, notDATA
? Clock signal		CL, notCL
? Telegram length, parameterizable		13, 21 or 25 bit
? Clock frequency, max.		1.25 Mbit/s
? Cable length, shielded, max.		100 m; 10 m at 1.25 Mbit/s, 100 m at max. 125 kbit/s
Drive interface
Signal Input
? Type		Input loop controller message, isolated (optocoupler)
? Function		"Drive ready"
? Input voltage, rated value (DC)		24 V
? Input voltage for signal "0"		-3 to +5V
? Input voltage for signal "1"		+15 to +30V
? Input current, for signal "1"		2 to 6 mA
Analog drive
Setpoint signal
— Rated voltage range		-10 to +10V
— Output current		-3 to +3 mA
— Cable length, max.		35 m
Output controller enable
— Switching voltage, max.		50 V
— Switching current, max.		1 A
— Switching capacity, max.		30 V·A
Potential separation
Potential separation digital inputs
? Potential separation digital inputs		No
Potential separation digital outputs
? Potential separation digital outputs		No
Connection method
required front connector		1x 20-pin
Dimensions
Width		80 mm
Height		125 mm
Depth		118 mm
Weights
Weight, approx.		550 g