| | | | |
General information 19" rack unit 19" rack unit with 4 HU for installationin hinged frame In cabinets with or without telescope rails Front plate can be swivelled downwards for service purposes (laptop connection) Internal gas paths: hose made of FKM (Viton) or pipe made of titanium or stainless steel Gas connections for sample gas inlet and outlet: pipe diameter 6 mm or 1/4" Flow indicator for sample gas on front plate (option) Sample chamber (OXYMAT channel) – with or without flow-type compensation branch – made of stainless steel (mat. no. 1.4571) or of tantalum for highly corrosive sample gases (e.g. HCl, Cl2 , SO2 , SO3 , etc.) Monitoring (option) of sample gas and/or reference gas (both channels) Display and control panel Large LCD panel for simultaneous display of:Measured value (digital and analog displays) Status bar Measuring ranges Contrast of LCD panel adjustable using menu Permanent LED backlighting Washable membrane keyboard with five softkeys Menu-driven operation for parameterization, test functions, adjustment User help in plain text Graphic display of concentration trend; programmable time intervals Bilingual operating software: Inputs and outputs (per channel) One analog output for each measured component Two analog inputs freely configurable (e.g. correction of cross-interference or external pressure sensor) Six digital inputs freely configurable (e.g. for measurement range switchover, processing of external signals from sample preparation) Six relay outputs freely configurable e.g. for fault, maintenance request, limit alarm, external solenoid valves) Expansion by eight additional digital inputs and eight additional relay outputs e.g. for autocalibration with up to four calibration gases Communication RS 485 present in the basic unit (connection at the rear; for the rack unit also behind the front plate).
Options
AK interface for the automotive industry with extended functions RS 485/RS 232 converter RS 485/Ethernet converter RS 485/USB converter Connection to networks via PROFIBUS DP/PA interface SIPROM GA software as the service and maintenance tool ULTRAMAT/OXYMAT 6, membrane keyboard and graphic display
Designs – Parts wetted by sample gas, standard Gas path ULTRAMAT channel
19" rack unit
With hoses
Bushing
Stainless steel, mat. no. 1.4571
Hose
FKM (e.g. Viton)
Sample chamber:
Aluminum
Aluminum
Stainless steel, mat. no. 1.4571,
O-ring: FKM (e.g. Viton) or FFKM (Kalrez)
CaF2 , adhesive: E353,
O-ring: FKM (e.g. Viton) or FFKM (Kalrez)
With pipes
Bushing
Titanium
Pipe
Titanium,
O-ring: FKM (e.g. Viton) or FFKM (Kalrez)
Sample chamber:
Aluminum
Tantalum (only for cell length 20 mm to 180 mm)
CaF2 , adhesive: E353,
O-ring: FKM (e.g. Viton) or FFKM (Kalrez)
With pipes
Bushing
Stainless steel, mat. no. 1.4571
Pipe
Stainless steel, mat. no. 1.4571,
O-ring: FKM (e.g. Viton) or FFKM (Kalrez)
Sample chamber:
Aluminum
Aluminum or tantalum (Ta: only for cell length 20 mm to 180 mm)
CaF2 , adhesive: E353,
O-ring: FKM (e.g. Viton) or FFKM (Kalrez)
Flow indicator
Measurement pipe
Duran glass
Variable area
Duran glass
Suspension boundary
PTFE (Teflon)
Angle pieces
FKM (e.g. Viton)
Pressure switch
Diaphragm
FKM (e.g. Viton)
Enclosure
PA 6.3T
Options Gas path ULTRAMAT channel
19" rack unit
Flow indicator
Measurement pipe
Duran glass
Variable area
Duran glass
Suspension boundary
PTFE (Teflon)
Angle pieces
FKM (e.g. Viton)
Pressure switch
Diaphragm
FKM (e.g. Viton)
Enclosure
PA 6.3T
Versions – Parts wetted by sample gas, special applications (examples) Gas path ULTRAMAT channel
19" rack unit
With pipes
Bushing
e.g. Hastelloy C22
Pipe
e.g. Hastelloy C22,
O-ring: FKM (e.g. Viton) or FFKM (Kalrez)
Sample chamber:
e.g. Hastelloy C22
CaF2 , without adhesive
O-ring: FKM (e.g. Viton) or FFKM (Kalrez)
Designs – Parts wetted by sample gas, standard Gas path OXYMAT channel
19" rack unit
With hoses
Bushing
Hose
Sample chamber
Fittings for sample chamber
Restrictor
O-rings
Stainless steel, mat. no. 1.4571
FKM (e.g. Viton)
Stainless steel, mat. no. 1.4571 or tantalum
Stainless steel, mat. no. 1.4571
PTFE (e.g. Teflon)
FKM (e.g. Viton)
With pipes
Bushing
Pipe
Sample chamber
Restrictor
O-rings
Titanium
Titanium
Stainless steel, mat. no. 1.4571 or Tantalum
Titanium
FKM (Viton) or FFKM (Kalrez)
With pipes
Bushing
Pipe
Sample chamber
Restrictor
O-rings
Stainless steel, mat. no. 1.4571
Stainless steel, mat. no. 1.4571
Stainless steel, mat. no. 1.4571 or Tantalum
Stainless steel, mat. no. 1.4571
FKM (Viton) or FFKM (Kalrez)
With pipes
Bushing
Pipe
Sample chamber
Restrictor
O-rings
Hastelloy C 22
Hastelloy C 22
Stainless steel, mat. no. 1.4571 or Tantalum
Hastelloy C 22
FKM (e.g. Viton) or FFKM (e.g. Kalrez)
Options Gas path ULTRAMAT channel
19" rack unit
Flow indicator
Measurement pipe
Duran glass
Variable area
Duran glass
Suspension boundary
PTFE (Teflon)
Angle pieces
FKM (e.g. Viton)
Pressure switch
Diaphragm
FKM (e.g. Viton)
Enclosure
PA 6.3T
Gas path Legend for the gas path figures
1
Sample gas inlet (OXYMAT channel)
11
Restrictor (in reference gas inlet)
2
Sample gas outlet (OXYMAT channel)
12
O2 hardware
3
Not used
13
Pressure sensor
4
Reference gas inlet
14
Pressure switch in sample gas path (option)
5
Sample gas inlet (ULTRAMAT channel)
15
Flow indicator in sample gas path (option)
6
Sample gas outlet (ULTRAMAT channel)
16
IR hardware
7
Reference gas outlet (ULTRAMAT channel, option)
17
Filter
8
Reference gas inlet (ULTRAMAT channel, option)
18
Pressure switch (reference gas) (option)
9
Purging gas
19
Restrictor in sample gas path (option)
10
Pressure sensor connection (ULTRAMAT channel)
ULTRAMAT/OXYMAT 6, gas path (example) IR channel without flow-type reference side
ULTRAMAT/OXYMAT 6, gas path (example) IR channel with flow-type reference side
