Ex analog output modules . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на Ex analog output modules

| | | | | | | |

Ex analog output modules

Article number		6ES7332-5RD00-0AB0
		SIMATIC S7,SM 332 ANALOG OUTPUT
Supply voltage
Load voltage L+
? Rated value (DC)		24 V
Input current
from load voltage L+ (without load), max.		200 mA
from backplane bus 5 V DC, max.		80 mA
Power loss
Power loss, typ.		4 W
Analog outputs
Number of analog outputs		4
Voltage output, short-circuit protection		Yes
Voltage output, short-circuit current, max.		70 mA
Current output, no-load voltage, max.		14 V
Output ranges, current
? 0 to 20 mA		Yes
? 4 mA to 20 mA		Yes
Connection of actuators
? for current output two-wire connection		Yes
Load impedance (in rated range of output)
? with current outputs, max.		500 ?
Cable length
? shielded, max.		200 m
Analog value generation for the outputs
Integration and conversion time/resolution per channel
? Resolution with overrange (bit including sign), max.		15 bit
? Basic conversion time (ms)		2.5 ms
Errors/accuracies
Operational error limit in overall temperature range
? Current, relative to output range, (+/-)		0.55 %
Basic error limit (operational limit at 25 °C)
? Current, relative to output range, (+/-)		0.2 %
Interrupts/diagnostics/status information
Diagnostic messages
? Diagnostic information readable		Yes
? Overrange		Yes
? Wire-break in actuator cable		Yes
Ex(i) characteristics
Maximum values of output circuits (per channel)
? Co (permissible external capacity), max.		850 nF
? Io (short-circuit current), max.		70 mA
? Lo (permissible external inductivity), max.		6.6 mH
? Po (power of load), max.		440 mW
? Uo (output no-load voltage), max.		14 V
Potential separation
Potential separation analog outputs
? Potential separation analog outputs		Yes
Permissible potential difference
between the outputs (UCM)		60 V DC/30 V AC when used in the hazardous area; 400 V DC/250 V AC when used in NON-hazardous area
Between the outputs and MANA (UCM)		60 V DC/30 V AC when used in the hazardous area; 400 V DC/250 V AC when used in NON-hazardous area
Standards, approvals, certificates
Use in hazardous areas
? Type of protection acc. to EN 50020 (CENELEC)		[EEx ib] IIC
? Type of protection acc. to FM		Class I, Division 2, Group A, B, C, D T4
? Test number PTB		Ex-96.D.2026X
Ambient conditions
Ambient temperature during operation
? max.		60 °C
Connection method
required front connector		20-pin
Weights
Weight, approx.		280 g