FM 353 positioning module . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на FM 353 positioning module

| | | | | | |

FM 353 positioning modules

Order number		6ES7353-1AH01-0AE0
		Positioning control FM 353 (FM step)
Supply voltage
Rated value (DC)
? 24 V DC		Yes
permissible range, lower limit (DC)		20.4 V
permissible range, upper limit (DC)		28.8 V
Input current
Current consumption, max.		300 mA
Power loss
Power loss, typ.		7 W
Digital inputs
Number of digital inputs		4; + 1 input for message signal
Functions		Reference cams, flying actual value setting, flying measurement, start/stop positioning, external block change
Input voltage
? Rated value (DC)		24 V
? for signal "0"		-3 to +5V
? for signal "1"		+11 to +30V
Input current
? for signal "0", max. (permissible quiescent current)		2 mA
? for signal "1", typ.		6 mA; 6 to 15 mA
Digital outputs
Number of digital outputs		4
Functions		Position reached: stop, axis travels forward, axis travels back, change M-function M97, change M-function M98, start enable, direct output via data record
Short-circuit protection		Yes
Output voltage
? Rated value (DC)		24 V
? for signal "1", min.		UP -3 V
Output current
? for signal "1" permissible range for 0 to 55 °C, max.		0.6 A; with UPmax
? for signal "0" residual current, max.		2 mA
Drive interface
Signal Input
? Function		"Power section ready"
Stepper drive
? Differential output voltage, min.		2 V; RL = 100 Ohm
? Differential output voltage for signal "0", max.		1 V; Io = 20 mA
? Differential output voltage for signal "1", min.		3.7 V; Io = -20 mA
? Cable length, shielded, max.		35 m
Potential separation
Potential separation digital inputs
? Potential separation digital inputs		No
Potential separation digital outputs
? Potential separation digital outputs		No
Connection method
required front connector		1x 20-pin
Dimensions
Width		80 mm
Height		125 mm
Depth		118 mm
Weights
Weight, approx.		500 g