Controller |
SIDOOR ATD420W machine tool door drive | 6FB1141?2AT10?-3WE2 | |
The following individual components must be ordered separately: |
Power supplies | "Power supplies" |
| 6FB1112?0AT20?2TR0 | |
- Switch mode power supply NT40
| 6FB1112?0AT20?3PS0 | |
Additional units
that enable universal implementation and maintenance of the door drive system | "Additional units" |
| 6FB1105?0AT01?6SW0 | |
| 6FB1105?0AT01?6ST0 | |
| 6FB1115?0AT10?4CP0 | |
DC geared motors | "Geared motors" |
- SIDOOR MDG180 geared motors (max. door weight 180 kg, degree of protection IP56)
| | |
- SIDOOR MDG180 L (pinion left)
| 6FB1103?0AT14?4MB0 | |
- SIDOOR MDG180 R (pinion right)
| 6FB1103?0AT13?4MB0 | |
- SIDOOR MDG400 geared motors (max. door weight 400 kg, degree of protection IP56)
| | |
- SIDOOR MDG400 L (pinion left)
| 6FB1103?0AT14?4MC0 | |
- SIDOOR MDG400 R (pinion right)
| 6FB1103?0AT13?4MC0 | |
- SIDOOR M3 geared motors (max. door weight 180 kg, degree of protection IP40)
| | |
- SIDOOR M3 L (pinion left)
| 6FB1103?0AT10?4MB0 | |
- SIDOOR M3 R (pinion right)
| 6FB1103?0AT11?4MB0 | |
- SIDOOR M4 geared motor (max. door weight 400 kg, degree of protection IP40)
| | |
- SIDOOR M4 L (pinion left)
| 6FB1103?0AT10?3MC0 | |
- SIDOOR M4 R (pinion right)
| 6FB1103?0AT11?3MC0 | |
- SIDOOR M5 geared motors (max. door weight 600 kg, degree of protection IP40)
| | |
- SIDOOR M5 L (pinion left)
| 6FB1103?0AT10?3MD0 | |
- SIDOOR M5 R (pinion right)
| 6FB1103?0AT11?3MD0 | |
Accessories for the overall system
See also overview diagram > "For elevators" | "Accessories" |
Accessories for all controllers for industrial applications | |
- Rubber-metal anti-vibration mounts
for low-noise operation of the door drive system
| | |
- for the SIDOOR MDG180 and SIDOOR M3 geared motors
| 6FB1104?0AT02?0AD0 | |
- for SIDOOR MDG400, SIDOOR M4 and SIDOOR M5 geared motors
| 6FB1104?0AT01?0AD0 | |
| | |
- for SIDOOR geared motors
for flexible accommodation of the rubber-bonded metal
| 6FB1104?0AT01?0AS0 | |
- for the deflector unit
for setting the toothed belt to the required tension
| 6FB1104?0AT02?0AS0 | |
- DIN rail holder for mounting controllers on the DIN rail TH 35 according to IEC 60715
| 6FB1144?0AT00?3AS0 | |
- Door clutch holder
for connecting a door leaf to the toothed belt
| | |
- for toothed belt width of 12 mm
| 6FB1104?0AT01?0CP0 | |
- for toothed belt width of 14 mm
| 6FB1104?0AT02?0CP0 | |
- Deflector unit
for the toothed belt STS, for attaching to the door system
| 6FB1104?0AT03?0AS0 | |
- Toothed belt STS
as a connection between the door system and the end positions of the door
| | |
- Toothed belt width 12 mm
Length 4 m
Length 45 m
|
6FB1104?0AT01?0AB0
6FB1104?0AT02?0AB0
| |
- Toothed belt width 14 mm
Length 4 m
Length 55 m
|
6FB1104?0AT03?0AB0
6FB1104?0AT04?0AB0
| |
Accessories for the SIDOOR ATD420W machine tool door drive | |
- Hybrid connecting cables CABLE-MDG
for connecting the SIDOOR MDG geared motor to the machine tool door drive
| | |
- CABLE-MDG-0.5m (length 0.5 m)
| 6FB1104?0AT00?0CB5 | |
- CABLE-MDG-1.5m (length 1.5 m)
| 6FB1104?0AT01?0CB5 | |
- CABLE-MDG-5m (length 5 m)
| 6FB1104?0AT05?0CB0 | |
- CABLE-MDG-7m (length 7 m)
| 6FB1104?0AT07?0CB0 | |
- CABLE-MDG-10m (length 10 m)
| 6FB1104?0AT10?0CB0 | |
- CABLE-MDG-15m (length 15 m)
| 6FB1104?0AT15?0CB0 | |
- CABLE-MDG-20m (length 20 m)
| | |
- PROFIBUS FastConnect bus connector and PROFIBUS FC Standard Cable GP
| | |
- PB FC RS 485 PLUG 180
bus connector for connecting the SIDOOR ATD420W machine tool door drive to the SIMATIC controller
| 6GK1500?0FC10 | |
- PB FC Standard Cable GP
bus cable with a special design for quick mounting
| 6XV1830?0EH10 | |
- Electronic module for ET 200S
for serial data exchange via point-to-point connection
| 6ES7138?4DF11?0AB0 | |
- Communication module CM PtP RS 422/485 BA
| 6ES7540?1AB00?0AA0 | |
- Communication module CM 1241
Communication module for point-to-point connection
| 6ES7241?1CH32?0XB0 | |
