|
Controller
|
|
SIDOOR ATD410W machine tool door drive
(incl. terminal module and USS module)
|
6FB1141?4AT10?3WE2
|
|
|
The following individual components must be ordered separately:
|
|
Power supplies
|
"Power supplies"
|
|
|
6FB1112?0AT20?2TR0
|
|
- Switch mode power supply NT40
|
6FB1112?0AT20?3PS0
|
|
|
Additional units
that enable universal implementation and maintenance of the door drive system
|
"Additional units"
|
|
|
6FB1105?0AT01?6SW0
|
|
|
|
6FB1105?0AT01?6ST0
|
|
|
|
6FB1115?0AT10?4CP0
|
|
|
DC geared motors
|
"Geared motors"
|
- SIDOOR MDG180 geared motors (max. door weight 180 kg, degree of protection IP56)
|
|
|
- SIDOOR MDG180 L (pinion left)
|
6FB1103?0AT14?4MB0
|
|
- SIDOOR MDG180 R (pinion right)
|
6FB1103?0AT13?4MB0
|
|
- SIDOOR MDG400 geared motors (max. door weight 400 kg, degree of protection IP56)
|
|
|
- SIDOOR MDG400 L (pinion left)
|
6FB1103?0AT14?3MC0
|
|
- SIDOOR MDG400 R (pinion right)
|
6FB1103?0AT13?3MC0
|
|
- SIDOOR M3 geared motors (max. door weight 180 kg, degree of protection IP40)
|
|
|
- SIDOOR M3 L (pinion left)
|
6FB1103?0AT10?4MB0
|
|
- SIDOOR M3 R (pinion right)
|
6FB1103?0AT11?4MB0
|
|
- SIDOOR M4 geared motors (max. door weight 400 kg, degree of protection IP40)
|
|
|
- SIDOOR M4 L (pinion left)
|
6FB1103?0AT10?3MC0
|
|
- SIDOOR M4 R (pinion right)
|
6FB1103?0AT11?3MC0
|
|
- SIDOOR M5 geared motors (max. door weight 600 kg, degree of protection IP54)
|
|
|
- SIDOOR M5 L (pinion left)
|
6FB1103?0AT10?3MD0
|
|
- SIDOOR M5 R (pinion right)
|
6FB1103?0AT11?3MD0
|
|
|
Accessories for the overall system
See also overview diagram > "For elevators"
|
"Accessories"
|
- Rubber-metal anti-vibration mounts
for low-noise operation of the door drive system
|
|
|
- for the SIDOOR MDG180 and SIDOOR M3 geared motors
|
6FB1104?0AT02?0AD0
|
|
- for SIDOOR MDG400, SIDOOR M4 and SIDOOR M5 geared motors
|
6FB1104?0AT01?0AD0
|
|
|
|
|
|
- for mounting the SIDOOR rubber-metal anti-vibration mount with a mounted geared motor
|
6FB1104?0AT01?0AS0
|
|
- with tensioning device for mounting the deflector unit and setting the toothed belt to the required tension
|
6FB1104?0AT02?0AS0
|
|
- DIN rail holder for mounting controllers on the DIN rail TH 35 according to IEC 60715
|
6FB1144?0AT00?3AS0
|
|
- Door clutch holder
for attaching both ends of the toothed belt, and for connecting the respective door panel to the toothed belt
|
|
|
- for toothed belt width of 12 mm
|
6FB1104?0AT01?0CP0
|
|
- for toothed belt width of 14 mm
|
6FB1104?0AT02?0CP0
|
|
- Deflector unit
for deflecting the STS toothed belt in the same height and depth, aligned with motor drive pinion
|
6FB1104?0AT03?0AS0
|
|
- Toothed belt STS
as a connection between the door system and the end positions of the door
|
|
|
- Toothed belt width 12 mm
Length 4 m
Length 45 m
|
6FB1104?0AT01?0AB0
6FB1104?0AT02?0AB0
|
|
- Toothed belt width 14 mm
Length 4 m
Length 55 m
|
6FB1104?0AT03?0AB0
6FB1104?0AT04?0AB0
|
|
|
Accessories for the SIDOOR ATD410W machine tool door drive only
|
|
- CABLE-MDG hybrid connecting cables
for connecting the SIDOOR MDG geared motor to the SIDOOR ATD410W machine tool door drive
|
|
|
- CABLE-MDG-0.5m (length 0.5 m)
|
6FB1104?0AT00?0CB5
|
|
- CABLE-MDG-1.5m (length 1.5 m)
|
6FB1104?0AT01?0CB5
|
|
- CABLE-MDG-5m (length 5 m)
|
6FB1104?0AT05?0CB0
|
|
- CABLE-MDG-7m (length 7 m)
|
6FB1104?0AT07?0CB0
|
|
- CABLE-MDG-10m (length 10 m)
|
6FB1104?0AT10?0CB0
|
|
- CABLE-MDG-15m (length 15 m)
|
6FB1104?0AT15?0CB0
|
|
- PROFIBUS FastConnect bus connector and PROFIBUS FC Standard Cable GP
|
|
|
- PB FC RS 485 PLUG 180
bus connector for connecting the SIDOOR ATD410W machine tool door drive to the SIMATIC controller
|
6GK1500?0FC10
|
|
- PB FC Standard Cable GP
bus cable with a special design for quick mounting
|
6XV1830-0EH10
|
|
- Electronic module for ET 200S
for serial data exchange via point-to-point connection
|
6ES7138?4DF11?0AB0
|
|
- Communication module CM PtP RS 422/485 BA
|
6ES7540?1AB00?0AA0
|
|
- Communication module CM 1241
Communication module for point-to-point connection
|
6ES7241?1CH32?0XB0
|
|
