|
| | | | |
?
|
Motors:
|
DH.. / MLFB: 1PS4, 1PS5
|
|
Shaft heights:
|
355, 400, 450, 500, 560, 630
|
|
Power range:
|
80 kW - 3150 kW
|
|
Number of poles:
|
2 - 16 poles, higher pole numbers on request
|
|
Voltage range:
|
3000 V - 11000 V
|
|
Rated voltage:
|
3.3 kV / 4.16 kV / 6 kV / 6.6 kV / 10 kV / 11 kV
|
|
Degree of protection:
|
IP55, IP56, IP65, IP67, IP68
|
|
Cooling type:
|
IC 411, IC 416
|
|
Type of construction:
|
IM B3, IM B35, IM V1
|
|
Enclosure:
|
Welded steel
|
|
Bearings:
|
Roller bearings, sleeve bearings (only for gas group IIB)
|
|
Standards:
|
IEC, EN, DIN, VDE
|
|
Explosion protection:
|
II2G Ex d(e) IIB T4, II2G Ex d(e) IIC T4
|
|
Type of protection:
without explosion protection
|
N.A.
|
|
Noise level:
|
max. 86 dB(A) (load, 50 Hz), lower noise versions are available
|
Features
- Also available for exceptional requirements such as dust explosion protection or double protection Ex e and Ex d.
- Corrosion protection using special paint finishes according to the manufacturer's standard or customer's specification.
- The motors are available as special version for polar regions down to -40 °C (without pre-heating of the motor) or desert regions up to +60 °C.
- When required, vertical motors can also be equipped with thrust bearings for high axial and radial loads.
- Operation with frequency converters is possible without any complex system test.
- Wide range of connection systems for large cable cross-sections, high short-circuit strength or phase-segregated version.
- Optimized starting and operating parameters and high efficiency by using copper bar rotors as standard.
|
|
