Order No. supplements
Motor type |
Penultimate position: Voltage code |
Final position: Type of construction code | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
50 Hz |
60 Hz |
Without flange |
With flange |
With standard |
With special flange | ||||||||
230 V?/400 VY |
400 V?/690 VY |
500 VY |
500 V? |
460 VY |
460 V? |
IM B3/6/7/8, IM V6, |
IM B5, IM V1 without protective cover2) |
IM V1 with protective cover2) |
IM B35 |
IM B14, IM V19, IM V18 without protective cover |
IM B34 |
IM B14, IM V19, IM V18 | |
(see “Introduction” for outputs at 60 Hz) |
|||||||||||||
1 |
6 |
3 |
5 |
1 |
6 |
0 |
1 |
8 |
6 |
2 |
7 |
3 | |
1LP4 18 . ? . . . ?? |
O |
O |
O |
O |
O |
O |
? |
? |
– |
? |
– |
– |
– |
1LP4 20 . ? . . . ?? |
O |
O |
O |
O |
O |
O |
? |
? |
– |
? |
– |
– |
– |
1LP4 22 . ? . . . ?? |
O |
O |
O |
O |
O |
O |
? |
? |
– |
? |
– |
– |
– |
1LP4 25 . ? . . . ?? |
O |
O |
O |
O |
O |
O |
? |
? |
– |
? |
– |
– |
– |
1LP4 28 . ? . . . ?? |
O |
O |
O |
O |
O |
O |
? |
? |
– |
? |
– |
– |
– |
1LP4 310 ? . . . ?? 1LP4 313 ? . . . ?? |
O |
O |
O |
O |
O |
O |
? |
? |
– |
? |
– |
– |
– |
1LP4 316 ? . . . ?? 1LP4 317 ? . . . ?? |
– |
O |
– |
O |
– |
O |
?3) |
– |
? |
? |
– |
– |
– |
? Standard version
O Without additional charge
? With additional charge
– Not possible
Order other voltages with voltage code9 in the penultimate position and the corresponding order code (see “Special versions” in the “Selection and ordering data” under “Voltages”).
Order other types of construction with type of construction code9 in the final position and the corresponding order code (see “Special versions” in the “Selection and ordering data” under “Types of construction”).
1) If motors 1LP4 183-... to 1LP4 317-... (motor series 1LP4 frame sizes 180 M to 315 L) in types of construction with feet IM B6, IM B7, IM V6 or IM V5 without protective cover are fixed to the wall, it is recommended that the motor feet are supported.
2) 1LP4 220-... to 1LP4 317-... motors (motor series 1LP4 frame sizes 225 S to 315 L) are supplied with two screwed-in eyebolts in accordance with IM B5, whereby one can be rotated in accordance with IM V1 or IM V3. It is important to note that stress must not be applied perpendicular to the ring plane.
3) Type of construction IM V6 and IM V5 without protective cover is only possible using type of construction code9 and order codeM1E orM1D.
Приводная техника