|
| | |
 Motor and converter are simply connected to one another by one cable instead of the usual two or three cables. With this One Cable Technology, energy supply, encoder signals and braking signal are brought together in a single cable. This results in the following advantages: - Time-saved by laying only one cable
- Smaller installation space and space requirement in cable collars
- Only one cable has to be cleaned. This is advantageous, e.g. in the pharmaceutical industry and where higher requirements are placed upon hygiene
- Can be ordered to the decimeter
- On the motor side, M12 connection plug (smallest OCC connector worldwide) or M17 connection plug
- Rotatable connectors on the motor side
- Motor with very low interfering contour for restricted installation space.
- Bending radius optimized to 2.5 Г— cable diameter static or 4 Г— cable diameter dynamic for MOTION-CONNECT 800Plus
|
|
