System power supplies . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на System power supplies

| | | | | | | |

Article number	6ES7505-0KA00-0AB0	6ES7505-0RA00-0AB0	6ES7505-0RB00-0AB0	6ES7507-0RA00-0AB0
	S7-1500, PS 25W 24V DC	S7-1500, PS 60W 24/48/60V DC	S7-1500, PS 60W 24/48/60V DC HF	S7-1500, PS 60W 120/230V AC/DC
General information
Product type designation	PS 25W 24VDC	PS 60 W 24/48/60 V DC	PS 60 W 24/48/60 V DC HF	PS 60 W 120/230 V AC/DC
HW functional status	E01	E01	E01	E01
Firmware version	V1.0.0	V1.0.0	V1.0.0	V1.0.0
Engineering with
в—Џ STEP 7 TIA Portal configurable/integrated as of version	V12 / V12	V12 / V12	V14 SP1	V12 / V12
в—Џ STEP 7 configurable/integrated as of version	V5.5 SP3 or higher	V5.5 SP3 or higher		V5.5 SP3 or higher
Supply voltage
Rated value (DC)	24 V	24 V / 48 V / 60 V	24 V / 48 V / 60 V	120 V / 230 V
permissible range, lower limit (DC)	Static 19.2 V, dynamic 18.5 V	Static 19.2 V, dynamic 18.5 V	Static 19.2 V, dynamic 18.5 V	88 V
permissible range, upper limit (DC)	Static 28.8 V, dynamic 30.2 V	Static 72 V, dynamic 75.5 V	Static 72 V, dynamic 75.5 V	300 V
Rated value (AC)				120 V / 230 V
permissible range, lower limit (AC)				85 V
permissible range, upper limit (AC)				264 V
Reverse polarity protection	Yes	Yes	Yes
Short-circuit protection	Yes	Yes	Yes	Yes
Line frequency
в—Џ Rated value 50 Hz				Yes
в—Џ permissible range, lower limit				47 Hz
в—Џ permissible range, upper limit				63 Hz
Mains buffering
в—Џ Mains/voltage failure stored energy time	20 ms	20 ms	20 ms	20 ms
Input current
Rated value at 24 V DC	1.3 A	3 A	3 A
Rated value at 48 V DC		1.5 A	1.5 A
Rated value at 60 V DC		1.2 A	1.2 A
Rated value at 120 V DC				0.6 A
Rated value at 230 V DC				0.3 A
Rated value at 120 V AC				0.6 A
Rated value at 230 V AC				0.34 A
Inrush current, max.			в‰¤ 8 A for t в‰¤ 1 s
Output current
Short-circuit protection	Yes	Yes	Yes	Yes
Power
Infeed power to the backplane bus	25 W	60 W	60 W	60 W
Power loss
Power loss at nominal rating conditions	6.2 W	12 W	12 W	12 W
Interrupts/diagnostics/status information
Status indicator	Yes	Yes	Yes	Yes
Potential separation
primary/secondary	Yes	Yes; Electrical isolation for 230 V AC (reinforced isolation)		Yes
Isolation
Isolation tested with	707 V DC (type test)	2 500 V DC/2 s (routine test)	2 500 V DC (type test)	2 500 V DC/2 s (routine test)
EMC
Interference immunity against voltage surge
в—Џ on the supply lines acc. to IEC 61000-4-5	Yes; ±1 kV (acc. to IEC 61000-4-5; 1995; surge symm.), ±2 kV (acc. to IEC 61000-4-5; 1995; surge asymm.), no external protective circuit required	Yes; ±1 kV (acc. to IEC 61000-4-5; 1995; surge symm.), ±2 kV (acc. to IEC 61000-4-5; 1995; surge asymm.), no external protective circuit required	Yes; ±1 kV (acc. to IEC 61000-4-5; 1995; surge symm.), ±2 kV (acc. to IEC 61000-4-5; 1995; surge asymm.), no external protective circuit required	Yes; ±1 kV (acc. to IEC 61000-4-5; 1995; surge symm.), ±2 kV (acc. to IEC 61000-4-5; 1995; surge asymm.), no external protective circuit required
Degree and class of protection
Degree of protection acc. to EN 60529	IP20	IP20	IP20	IP20
Equipment protection class	III, with protective conductor	I, with protective conductor	I, with protective conductor	I, with protective conductor
Dimensions
Width	35 mm	70 mm	105 mm	70 mm
Height	147 mm	147 mm	147 mm	147 mm
Depth	129 mm	129 mm	129 mm	129 mm
Weights
Weight, approx.	350 g	600 g	865 g	600 g