SIPLUS SM 1226 fail-safe digital output . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SIPLUS SM 1226 fail-safe digital output

| | | | | |

Article number		6AG1226-6DA32-5XB0
		SIPLUS S7-1200 SM 1226 F-DQ 4x24VDC
Supply voltage
Rated value (DC)
в—Џ 24 V DC		Yes
permissible range, lower limit (DC)		20.4 V
permissible range, upper limit (DC)		28.8 V
Input current
from backplane bus 5 V DC, max.		125 mA
Digital outputs
в—Џ from load voltage L+, max.		170 mA
Power loss
Power loss, typ.		8 W
Digital outputs
Number of digital outputs		4
в—Џ in groups of		1
Short-circuit protection		Yes
Switching capacity of the outputs
в—Џ with resistive load, max.		30 Hz
в—Џ on lamp load, max.		10 Hz
Output voltage
в—Џ Rated value (DC)		24 V
Output current
в—Џ for signal "1" rated value		2 A
в—Џ for signal "1" permissible range, max.		10 mA to 2.4 A
в—Џ for signal "0" residual current, max.		P-switch: 0.5 mA, maximum; M-switch: 0.5 mA, maximum
Cable length
в—Џ shielded, max.		200 m
в—Џ unshielded, max.		200 m
Diagnostics indication LED
в—Џ for status of the outputs		Yes
Standards, approvals, certificates
CE mark		Yes
cULus		Yes
FM approval		No
Highest safety class achievable in safety mode
в—Џ Performance level according to ISO 13849-1		Category 4, PL e
в—Џ SIL acc. to IEC 61508		SIL 3
Ambient conditions
Free fall
в—Џ Fall height, max.		0.3 m; five times, in product package
Ambient temperature during operation
в—Џ min.		-25 °C; = Tmin
в—Џ max.		55 °C; = Tmax
в—Џ permissible temperature change		5°C to 55°C, 3°C / minute
Ambient temperature during storage/transportation
в—Џ min.		-40 °C
в—Џ max.		70 °C
Altitude during operation relating to sea level
в—Џ Ambient air temperature-barometric pressure-altitude		Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)
Relative humidity
в—Џ With condensation, tested in accordance with IEC 60068-2-38, max.		100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Use in stationary industrial systems
вЂ” to biologically active substances according to EN 60721-3-3		Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request
вЂ” to chemically active substances according to EN 60721-3-3		Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
вЂ” to mechanically active substances according to EN 60721-3-3		Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Mechanics/material
Enclosure material (front)
в—Џ Plastic		Yes
Dimensions
Width		70 mm
Height		100 mm
Depth		75 mm
Weights
Weight, approx.		270 g