Interface module . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на Interface module

| | | |

Article number		6DL1155-6AU00-0PM0
		ET 200SP HA, IM155-6 PN
General information
Product type designation		IM 155-6 PN
HW functional status		FS01
Firmware version		V1.0
Vendor identification (VendorID)		02AH
Device identifier (DeviceID)		030FH
Product function
в—Џ I&M data		Yes; I&M0 to I&M3
Engineering with
в—Џ PCS 7 configurable/integrated as of version		V9.0
Configuration control
via dataset		No
Supply voltage
Type of supply voltage		DC
Rated value (DC)		24 V
permissible range, lower limit (DC)		19.2 V
permissible range, upper limit (DC)		28.8 V
Reverse polarity protection		Yes
Short-circuit protection		Yes
Mains buffering
в—Џ Mains/voltage failure stored energy time		10 ms
Input current
Current consumption, max.		700 mA; +19.2 V to +28.8 V DC
Inrush current, max.		5 A
IІt		0.36 AІ·s; Due to increased mains buffering of 10 ms
Power
Infeed power to the backplane bus		7.5 W; No doubling in redundant mode as the infeed power is also designed as redundant.
Power loss
Power loss, typ.		2.4 W
Address area
Address space per module
в—Џ Address space per module, max.		256 byte
Address space per station
в—Џ Address space per station, max.		1 440 byte; 1 440 bytes R1 and S1 without CiR, otherwise 1 000 bytes
Hardware configuration
Integrated power supply		Yes; 24 V DC
Rack
в—Џ Modules per rack, max.		56; 56 slots for I/O modules + server module (width without IM в‰¤ 1.3 m)
Time stamping
Accuracy		1 ms; In compliance with the supplementary conditions described in the Equipment Manual
Interfaces
Number of PROFINET interfaces		1; 2 ports (switch)
1. Interface
Interface types
в—Џ Number of ports		2; via BusAdapter
в—Џ integrated switch		Yes
в—Џ BusAdapter (PROFINET)		Yes; Compatible BusAdapters: BA 2x RJ45, BA 2x FC, BA 2x LC
Functionality
в—Џ PROFINET IO Device		Yes
в—Џ Open IE communication		Yes
в—Џ Media redundancy		Yes; as MRP client
Interface types
RJ 45 (Ethernet)
в—Џ Transmission procedure		PROFINET with 100 Mbit/s full duplex (100BASE-TX)
в—Џ 100 Mbps		Yes; PROFINET with 100 Mbit/s full duplex (100BASE-TX)
в—Џ Autonegotiation		Yes
в—Џ Autocrossing		Yes
PROFINET IO Device
Services
вЂ” Open IE communication		Yes
вЂ” MRP		Yes
вЂ” PROFINET system redundancy		Yes; S2, R1
Open IE communication
в—Џ TCP/IP		Yes
в—Џ SNMP		Yes
в—Џ LLDP		Yes
Interrupts/diagnostics/status information
Status indicator		Yes
Alarms		Yes
Diagnostic functions		Yes
Diagnostics indication LED
в—Џ RUN LED		Yes; Green LED
в—Џ ERROR LED		Yes; Red LED
в—Џ MAINT LED		Yes; yellow LED
в—Џ ACTIVE-LED (active IM in redundant configuration)		Yes; Green LED
в—Џ Monitoring of the supply voltage (PWR-LED)		Yes; green PWR LED
в—Џ Connection display LINK TX/RX		Yes; 2x green link LEDs on BusAdapter
Potential separation
between PROFINET and all other circuits		Yes; 1500 V AC
between supply and all other circuits		Yes; Type tested with 1 500 V DC
Permissible potential difference
between different circuits		Safety extra low voltage SELV
Isolation
Isolation tested with		1 500 V DC/1 min, type test
Ambient conditions
Ambient temperature during operation
в—Џ horizontal installation, min.		-40 °C
в—Џ horizontal installation, max.		70 °C
в—Џ vertical installation, min.		-40 °C
в—Џ vertical installation, max.		60 °C
Dimensions
Width		50 mm
Height		138 mm
Depth		89 mm
Weights
Weight, approx.		192 g; without BusAdapter