|
| | | | | | | | |
- 2-port interface via bus adapter with an RJ45 connection with 10/100 Mbps full/half duplex with autosensing functionality
- The CP 1543SP-1 communications processor connects the ET 200SP Distributed Controller to additional Industrial Ethernet networks.
- Communication services:
- Open communication (TCP/IP, UDP, ISO-on-TCP):
Multicast with UDP - PG/OP communication: Inter-network with S7 routing
- S7 communication (client, server)
- S7 routing
- IT communication:
HTTP communication allows access to the web server of the CPU. With the CP 1543SP-1, HTTPS communication is also possible.
The e-mail client function allows e-mails to be sent directly from the user program.
IP address assignment via DHCP for IPv4 or via direct entry in the engineering software and via the T_CONFIG function block
STEP 7 Professional V14 (TIA Portal) or higher
- Diagnostics and network management:
- Extensive diagnostic functions of all modules in the ET 200SP system
- Integration in network management systems due to support of SNMP v1/v3
- Security mechanisms:
- Access protection with firewall for filtering connections on the basis of their IP and MAC addresses
- Secure communication via VPN (IPsec)
- Encrypted HTML pages using SSL (HTTPS)
- Secure transfer of the time of day (NTPS)
- Configuration of all functions with STEP 7 Professional V14 (TIA Portal) or higher
- Module replacement without programming device: All information can be stored on the memory card of the CPU.
|
|
