CPU 1511T-1 PN . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на CPU 1511T-1 PN

| | | | | | | |

Article number		6ES7511-1TK01-0AB0
		CPU 1511T-1PN, 225KB progr., 1MB data
General information
Product type designation		CPU 1511T-1 PN
HW functional status		FS03
Firmware version		V2.5
Engineering with
в—Џ STEP 7 TIA Portal configurable/integrated as of version		V15 (FW V2.5) / V14 (FW V2.0) or higher
Configuration control
via dataset		Yes
Display
Screen diagonal [cm]		3.45 cm
Control elements
Number of keys		6
Mode selector switch		1
Supply voltage
Type of supply voltage		24 V DC
permissible range, lower limit (DC)		19.2 V
permissible range, upper limit (DC)		28.8 V
Reverse polarity protection		Yes
Mains buffering
в—Џ Mains/voltage failure stored energy time		5 ms
в—Џ Repeat rate, min.		1/s
Input current
Current consumption (rated value)		0.7 A
Inrush current, max.		1.9 A; Rated value
IІt		0.02 AІ·s
Power
Infeed power to the backplane bus		10 W
Power consumption from the backplane bus (balanced)		5.5 W
Power loss
Power loss, typ.		5.7 W
Memory
Number of slots for SIMATIC memory card		1
SIMATIC memory card required		Yes
Work memory
в—Џ integrated (for program)		225 kbyte
в—Џ integrated (for data)		1 Mbyte
Load memory
в—Џ Plug-in (SIMATIC Memory Card), max.		32 Gbyte
Backup
в—Џ maintenance-free		Yes
CPU processing times
for bit operations, typ.		60 ns
for word operations, typ.		72 ns
for fixed point arithmetic, typ.		96 ns
for floating point arithmetic, typ.		384 ns
CPU-blocks
Number of elements (total)		2 000; Blocks (OB, FB, FC, DB) and UDTs
DB
в—Џ Number range		1 ... 60 999; subdivided into: number range that can be used by the user: 1 ... 59 999, and number range of DBs created via SFC 86: 60 000 ... 60 999
в—Џ Size, max.		1 Mbyte; For non-optimized block accesses, the max. size of the DB is 64 KB
FB
в—Џ Number range		0 ... 65 535
в—Џ Size, max.		150 kbyte
FC
в—Џ Number range		0 ... 65 535
в—Џ Size, max.		150 kbyte
OB
в—Џ Size, max.		150 kbyte
в—Џ Number of free cycle OBs		100
в—Џ Number of time alarm OBs		20
в—Џ Number of delay alarm OBs		20
в—Џ Number of cyclic interrupt OBs		20; With minimum OB 3x cycle of 500 µs
в—Џ Number of process alarm OBs		50
в—Џ Number of DPV1 alarm OBs		3
в—Џ Number of isochronous mode OBs		1
в—Џ Number of technology synchronous alarm OBs		2
в—Џ Number of startup OBs		100
в—Џ Number of asynchronous error OBs		4
в—Џ Number of synchronous error OBs		2
в—Џ Number of diagnostic alarm OBs		1
Nesting depth
в—Џ per priority class		24
Counters, timers and their retentivity
S7 counter
в—Џ Number		2 048
Retentivity
вЂ” adjustable		Yes
IEC counter
в—Џ Number		Any (only limited by the main memory)
Retentivity
вЂ” adjustable		Yes
S7 times
в—Џ Number		2 048
Retentivity
вЂ” adjustable		Yes
IEC timer
в—Џ Number		Any (only limited by the main memory)
Retentivity
вЂ” adjustable		Yes
Data areas and their retentivity
Retentive data area (incl. timers, counters, flags), max.		128 kbyte; In total; available retentive memory for bit memories, timers, counters, DBs, and technology data (axes): 88 KB
Extended retentive data area (incl. timers, counters, flags), max.		1 Mbyte; When using PS 60W 24/48/60V DC HF
Flag
в—Џ Number, max.		16 kbyte
в—Џ Number of clock memories		8; 8 clock memory bits, grouped into one clock memory byte
Data blocks
в—Џ Retentivity adjustable		Yes
в—Џ Retentivity preset		No
Local data
в—Џ per priority class, max.		64 kbyte; max. 16 KB per block
Address area
Number of IO modules		1 024; max. number of modules / submodules
I/O address area
в—Џ Inputs		32 kbyte; All inputs are in the process image
в—Џ Outputs		32 kbyte; All outputs are in the process image
per integrated IO subsystem
вЂ” Inputs (volume)		8 kbyte
вЂ” Outputs (volume)		8 kbyte
per CM/CP
вЂ” Inputs (volume)		8 kbyte
вЂ” Outputs (volume)		8 kbyte
Subprocess images
в—Џ Number of subprocess images, max.		32
Hardware configuration
Number of distributed IO systems		32; A distributed I/O system is characterized not only by the integration of distributed I/O via PROFINET or PROFIBUS communication modules, but also by the connection of I/O via AS-i master modules or links (e.g. IE/PB-Link)
Number of DP masters
в—Џ Via CM		4; A maximum of 4 CMs/CPs (PROFIBUS, PROFINET, Ethernet) can be inserted in total
Number of IO Controllers
в—Џ integrated		1
в—Џ Via CM		4; A maximum of 4 CMs/CPs (PROFIBUS, PROFINET, Ethernet) can be inserted in total
Rack
в—Џ Modules per rack, max.		32; CPU + 31 modules
в—Џ Number of lines, max.		1
PtP CM
в—Џ Number of PtP CMs		the number of connectable PtP CMs is only limited by the number of available slots
Time of day
Clock
в—Џ Type		Hardware clock
в—Џ Backup time		6 wk; At 40 °C ambient temperature, typically
в—Џ Deviation per day, max.		10 s; Typ.: 2 s
Operating hours counter
в—Џ Number		16
Clock synchronization
в—Џ supported		Yes
в—Џ in AS, master		Yes
в—Џ in AS, slave		Yes
в—Џ on Ethernet via NTP		Yes
Interfaces
Number of PROFINET interfaces		1
1. Interface
Interface types
в—Џ Number of ports		2
в—Џ integrated switch		Yes
в—Џ RJ 45 (Ethernet)		Yes; X1
Functionality
в—Џ IP protocol		Yes; IPv4
в—Џ PROFINET IO Controller		Yes
в—Џ PROFINET IO Device		Yes
в—Џ SIMATIC communication		Yes
в—Џ Open IE communication		Yes
в—Џ Web server		Yes
в—Џ Media redundancy		Yes; MRP Automanager according to IEC 62439-2 Edition 2.0
PROFINET IO Controller
Services
вЂ” PG/OP communication		Yes
вЂ” S7 routing		Yes
вЂ” Isochronous mode		Yes
вЂ” Open IE communication		Yes
вЂ” IRT		Yes
вЂ” MRP		Yes; As MRP redundancy manager and/or MRP client; max. number of devices in the ring: 50
вЂ” MRPD		Yes; Requirement: IRT
вЂ” PROFIenergy		Yes
вЂ” Prioritized startup		Yes; Max. 32 PROFINET devices
вЂ” Number of connectable IO Devices, max.		128; In total, up to 256 distributed I/O devices can be connected via AS-i, PROFIBUS or PROFINET
вЂ” Of which IO devices with IRT, max.		64
вЂ” Number of connectable IO Devices for RT, max.		128
вЂ” of which in line, max.		128
вЂ” Number of IO Devices that can be simultaneously activated/deactivated, max.		8; in total across all interfaces
вЂ” Number of IO Devices per tool, max.		8
вЂ” Updating times		The minimum value of the update time also depends on communication share set for PROFINET IO, on the number of IO devices, and on the quantity of configured user data
Update time for IRT
вЂ” for send cycle of 250 µs		250 Ојs to 4 ms; Note: In the case of IRT with isochronous mode, the minimum update time of 625 µs of the isochronous OB is decisive
вЂ” for send cycle of 500 µs		500 Ојs to 8 ms; Note: In the case of IRT with isochronous mode, the minimum update time of 625 µs of the isochronous OB is decisive
вЂ” for send cycle of 1 ms		1 ms to 16 ms
вЂ” for send cycle of 2 ms		2 ms to 32 ms
вЂ” for send cycle of 4 ms		4 ms to 64 ms
вЂ” With IRT and parameterization of "odd" send cycles		Update time = set "odd" send clock (any multiple of 125 µs: 375 µs, 625 µs ... 3 875 µs)
Update time for RT
вЂ” for send cycle of 250 µs		250 µs to 128 ms
вЂ” for send cycle of 500 µs		500 µs to 256 ms
вЂ” for send cycle of 1 ms		1 ms to 512 ms
вЂ” for send cycle of 2 ms		2 ms to 512 ms
вЂ” for send cycle of 4 ms		4 ms to 512 ms
PROFINET IO Device
Services
вЂ” PG/OP communication		Yes
вЂ” S7 routing		Yes
вЂ” Isochronous mode		No
вЂ” Open IE communication		Yes
вЂ” IRT		Yes
вЂ” MRP		Yes
вЂ” MRPD		Yes; Requirement: IRT
вЂ” PROFIenergy		Yes
вЂ” Shared device		Yes
вЂ” Number of IO Controllers with shared device, max.		4
вЂ” Asset management record		Yes; Per user program
Interface types
RJ 45 (Ethernet)
в—Џ 100 Mbps		Yes
в—Џ Autonegotiation		Yes
в—Џ Autocrossing		Yes
в—Џ Industrial Ethernet status LED		Yes
Protocols
Number of connections
в—Џ Number of connections, max.		96; via integrated interfaces of the CPU and connected CPs / CMs
в—Џ Number of connections reserved for ES/HMI/web		10
в—Џ Number of connections via integrated interfaces		64
в—Џ Number of S7 routing paths		16
PROFINET IO Controller
Services
вЂ” PG/OP communication		Yes
вЂ” S7 routing		Yes
вЂ” Isochronous mode		Yes
вЂ” Open IE communication		Yes
вЂ” IRT		Yes
вЂ” MRP		Yes; As MRP redundancy manager and/or MRP client; max. number of devices in the ring: 50
вЂ” MRPD		Yes; Requirement: IRT
вЂ” PROFIenergy		Yes
вЂ” Prioritized startup		Yes; Max. 32 PROFINET devices
вЂ” Number of connectable IO Devices, max.		128; In total, up to 256 distributed I/O devices can be connected via AS-i, PROFIBUS or PROFINET
вЂ” Of which IO devices with IRT, max.		64
вЂ” Number of connectable IO Devices for RT, max.		128
вЂ” of which in line, max.		128
вЂ” Number of IO Devices that can be simultaneously activated/deactivated, max.		8; in total across all interfaces
вЂ” Number of IO Devices per tool, max.		8
вЂ” Updating times		The minimum value of the update time also depends on communication share set for PROFINET IO, on the number of IO devices, and on the quantity of configured user data
SIMATIC communication
в—Џ S7 communication, as server		Yes
в—Џ S7 communication, as client		Yes
в—Џ User data per job, max.		See online help (S7 communication, user data size)
Open IE communication
в—Џ TCP/IP		Yes
вЂ” Data length, max.		64 kbyte
вЂ” several passive connections per port, supported		Yes
в—Џ ISO-on-TCP (RFC1006)		Yes
вЂ” Data length, max.		64 kbyte
в—Џ UDP		Yes
вЂ” Data length, max.		2 kbyte; 1 472 bytes for UDP broadcast
вЂ” UDP multicast		Yes; Max. 5 multicast circuits
в—Џ DHCP		No
в—Џ SNMP		Yes
в—Џ DCP		Yes
в—Џ LLDP		Yes
Web server
в—Џ HTTP		Yes; Standard and user pages
в—Џ HTTPS		Yes; Standard and user pages
OPC UA
в—Џ Runtime license required		Yes
в—Џ OPC UA Server		Yes; Data access (read, write, subscribe), method call, custom address space
вЂ” Application authentication		Yes
вЂ” Security policies		Available security policies: None, Basic128Rsa15, Basic256Rsa15, Basic256Sha256
вЂ” User authentication		"anonymous" or by user name & password
Further protocols
в—Џ MODBUS		Yes; MODBUS TCP
Media redundancy
в—Џ Switchover time on line break, typ.		200 ms; For MRP, bumpless for MRPD
в—Џ Number of stations in the ring, max.		50
Isochronous mode
Isochronous operation (application synchronized up to terminal)		Yes; With minimum OB 6x cycle of 625 µs
Equidistance		Yes
S7 message functions
Number of login stations for message functions, max.		32
Program alarms		Yes
Number of configurable program alarms		5 000
Number of simultaneously active program alarms
в—Џ Number of program alarms		300
в—Џ Number of alarms for system diagnostics		100
в—Џ Number of alarms for motion technology objects		80
Test commissioning functions
Joint commission (Team Engineering)		Yes; Parallel online access possible for up to 5 engineering systems
Status block		Yes; Up to 8 simultaneously (in total across all ES clients)
Single step		No
Number of breakpoints		8
Status/control
в—Џ Status/control variable		Yes
в—Џ Variables		Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters
в—Џ Number of variables, max.
вЂ” of which status variables, max.		200; per job
вЂ” of which control variables, max.		200; per job
Forcing
в—Џ Forcing, variables		Peripheral inputs/outputs
в—Џ Number of variables, max.		200
Diagnostic buffer
в—Џ present		Yes
в—Џ Number of entries, max.		1 000
вЂ” of which powerfail-proof		500
Traces
в—Џ Number of configurable Traces		4; Up to 512 KB of data per trace are possible
Interrupts/diagnostics/status information
Diagnostics indication LED
в—Џ RUN/STOP LED		Yes
в—Џ ERROR LED		Yes
в—Џ MAINT LED		Yes
в—Џ Connection display LINK TX/RX		Yes
Supported technology objects
Motion Control		Yes; Note: The number of technology objects affects the cycle time of the PLC program; selection guide via the TIA Selection Tool or SIZER
в—Џ Number of available Motion Control resources for technology objects (except cam disks)		800
в—Џ Required Motion Control resources
вЂ” per speed-controlled axis		40
вЂ” per positioning axis		80
вЂ” per synchronous axis		160
вЂ” per external encoder		80
вЂ” per output cam		20
вЂ” per cam track		160
вЂ” per probe		40
в—Џ Number of available Extended Motion Control resources for technology objects		40
в—Џ Required Extended Motion Control resources
вЂ” for each cam		2
вЂ” for each set of kinematics		30
в—Џ Positioning axis
вЂ” Number of positioning axes at motion control cycle of 4 ms (typical value)		5
вЂ” Number of positioning axes at motion control cycle of 8 ms (typical value)		10
Controller
в—Џ PID_Compact		Yes; Universal PID controller with integrated optimization
в—Џ PID_3Step		Yes; PID controller with integrated optimization for valves
в—Џ PID-Temp		Yes; PID controller with integrated optimization for temperature
Counting and measuring
в—Џ High-speed counter		Yes
Ambient conditions
Ambient temperature during operation
в—Џ horizontal installation, min.		0 °C
в—Џ horizontal installation, max.		60 °C; Display: 50 °C, at an operating temperature of typically 50 °C, the display is switched off
в—Џ vertical installation, min.		0 °C
в—Џ vertical installation, max.		40 °C; Display: 40 °C, at an operating temperature of typically 40 °C, the display is switched off
Ambient temperature during storage/transportation
в—Џ min.		-40 °C
в—Џ max.		70 °C
Configuration
Programming
Programming language
вЂ” LAD		Yes
вЂ” FBD		Yes
вЂ” STL		Yes
вЂ” SCL		Yes
вЂ” GRAPH		Yes
Know-how protection
в—Џ User program protection/password protection		Yes
в—Џ Copy protection		Yes
в—Џ Block protection		Yes
Access protection
в—Џ Password for display		Yes
в—Џ Protection level: Write protection		Yes
в—Џ Protection level: Read/write protection		Yes
в—Џ Protection level: Complete protection		Yes
Cycle time monitoring
в—Џ lower limit		adjustable minimum cycle time
в—Џ upper limit		adjustable maximum cycle time
Dimensions
Width		35 mm
Height		147 mm
Depth		129 mm
Weights
Weight, approx.		430 g