SIPLUS extreme RAIL digital outputs . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SIPLUS extreme RAIL digital outputs

| | | | | |

Article number	6AG2132-6BH00-4BA0	6AG2132-6BF00-4CA0	6AG2132-6BD20-4BA0
	SIPLUS ET 200SP DQ 16X24VDC/0.5A TX RAIL	SIPLUS ET 200SP DQ 8X24VDC/0.5A TX RAIL	SIPLUS ET 200SP DQ 4X24VDC/2A ST TX RAIL
General information
Product type designation	DQ 16x24 VDC/0.5 A ST	DQ 8x24 VDC/0.5 A ST	DQ 4x24 V DC/2 A ST
Firmware version
в—Џ FW update possible	Yes	Yes	Yes
usable BaseUnits	BU type A0	BU type A0	BU type A0
Color code for module-specific color identification plate	CC00	CC02	CC02
Product function
в—Џ I&M data	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3
Operating mode
в—Џ DQ	Yes	Yes	Yes
в—Џ DQ with energy-saving function	No	No	No
в—Џ PWM	No	No	No
в—Џ Oversampling	No	No	No
в—Џ MSO	No	Yes	No
Redundancy
в—Џ Redundancy capability	Yes	Yes	Yes
Supply voltage
Rated value (DC)	24 V	24 V	24 V
permissible range, lower limit (DC)	19.2 V	19.2 V	19.2 V
permissible range, upper limit (DC)	28.8 V	28.8 V	28.8 V
Reverse polarity protection	Yes	Yes	Yes
Input current
Current consumption, max.	60 mA; without load		60 mA; without load
Output voltage
Rated value (DC)	24 V	24 V	24 V
Power loss
Power loss, typ.	1 W	1 W	1 W
Address area
Address space per module
в—Џ Address space per module, max.	2 byte	8 byte; 2 channels per submodule + QI information	1 byte; + 1 byte for QI information
Digital outputs
Type of digital output		Source output (PNP, current-sourcing)	Source output (PNP, current-sourcing)
Number of digital outputs	16; > +60 °C max. total current 1.0 A	8; > +60 °C max. total current 1.0 A	4; > +60 °C number of simultaneously controllable outputs max. 2 x 0.25 A or max. 4 x 0.125 A, max. total current 0.5 A
Current-sinking	No	No	No
Current-sourcing	Yes	Yes	Yes
Short-circuit protection	Yes	Yes	Yes
в—Џ Response threshold, typ.	0.7 to 1.3 A	0.7 to 1.3 A	2.8 to 5.2 A
Limitation of inductive shutdown voltage to	Typ. L+ (-50 V)	Typ. L+ (-50 V)	Typ. L+ (-50 V)
Controlling a digital input	Yes	Yes	Yes
Switching capacity of the outputs
в—Џ with resistive load, max.	0.5 A	0.5 A	2 A
в—Џ on lamp load, max.	5 W	5 W	10 W
Load resistance range
в—Џ lower limit	48 в„¦	48 в„¦	12 в„¦
в—Џ upper limit	12 kв„¦	12 kв„¦	3 400 в„¦
Output current
в—Џ for signal "1" rated value	0.5 A	0.5 A	2 A
в—Џ for signal "0" residual current, max.	0.1 mA	0.1 mA	0.1 mA
Output delay with resistive load
в—Џ "0" to "1", typ.	50 µs	50 µs	50 µs
в—Џ "0" to "1", max.			50 µs
в—Џ "1" to "0", typ.	100 µs	100 µs	100 µs
в—Џ "1" to "0", max.			100 µs
Parallel switching of two outputs
в—Џ for uprating	No	No	No
в—Џ for redundant control of a load	Yes	Yes	Yes
Switching frequency
в—Џ with resistive load, max.	100 Hz	100 Hz	100 Hz
в—Џ with inductive load, max.	2 Hz	2 Hz	2 Hz
в—Џ on lamp load, max.	10 Hz	10 Hz	10 Hz
Total current of the outputs
в—Џ Current per channel, max.	0.5 A	0.5 A	2 A
в—Џ Current per module, max.	8 A	4 A	8 A
Total current of the outputs (per module)
horizontal installation
вЂ” up to 30 °C, max.	8 A		8 A
вЂ” up to 40 °C, max.	8 A		8 A
вЂ” up to 50 °C, max.	6 A		6 A
вЂ” up to 60 °C, max.	4 A	4 A	4 A
вЂ” up to 70 °C, max.		1 A	0.5 A
vertical installation
вЂ” up to 30 °C, max.			8 A
вЂ” up to 40 °C, max.			6 A
вЂ” up to 50 °C, max.		4 A; in all other mounting positions	4 A
вЂ” up to 60 °C, max.			4 A
Cable length
в—Џ shielded, max.	1 000 m	1 000 m	1 000 m
в—Џ unshielded, max.	600 m	600 m	600 m
Isochronous mode
Isochronous operation (application synchronized up to terminal)	No	Yes	No
Execution and activation time (TCO), min.		48 µs
Bus cycle time (TDP), min.		500 µs
Interrupts/diagnostics/status information
Diagnostics function	Yes	Yes	Yes
Substitute values connectable	Yes	Yes	Yes
Alarms
в—Џ Diagnostic alarm	Yes	Yes	Yes
Diagnostic messages
в—Џ Monitoring the supply voltage	Yes	Yes	Yes
в—Џ Wire-break	Yes; Module-wise	Yes; channel by channel	Yes; Module-wise
в—Џ Short-circuit	Yes; Module-wise	Yes; channel by channel	Yes; Module-wise
в—Џ Group error	Yes	Yes	Yes
Diagnostics indication LED
в—Џ Monitoring of the supply voltage (PWR-LED)	Yes; green PWR LED	Yes; green PWR LED	Yes; green PWR LED
в—Џ Channel status display	Yes; Green LED	Yes; Green LED	Yes; Green LED
в—Џ for channel diagnostics	No	Yes; Red LED	No
в—Џ for module diagnostics	Yes; green/red DIAG LED	Yes; green/red DIAG LED	Yes; green/red DIAG LED
Potential separation
Potential separation channels
в—Џ between the channels	No	No	No
в—Џ between the channels and backplane bus	Yes	Yes	Yes
Isolation
Isolation tested with	707 V DC (type test) and according to EN 50155 (routine test)	707 V DC (type test) and according to EN 50155 (routine test)	707 V DC (type test) and according to EN 50155 (routine test)
Standards, approvals, certificates
Railway application
в—Џ EN 50121-3-2	Yes; EMC for rail vehicles	Yes; EMC for rail vehicles	Yes; EMC for rail vehicles
в—Џ EN 50121-4	Yes; EMC for signal and telecommunications systems	Yes; EMC for signal and telecommunications systems	Yes; EMC for signal and telecommunications systems
в—Џ EN 50124-1	Yes; Railway applications - overvoltage category OV2; pollution degree PD2; rated surge voltage UNi = 0.5 kV; UNm = 24 V DC	Yes; Railway applications - overvoltage category OV2; pollution degree PD2; rated surge voltage UNi = 0.5 kV; UNm = 24 V DC	Yes; Railway applications - overvoltage category OV2; pollution degree PD2; rated surge voltage UNi = 0.5 kV; UNm = 24 V DC
в—Џ EN 50125-1	Yes; Rail vehicles - see ambient conditions	Yes; Rail vehicles - see ambient conditions	Yes; Rail vehicles - see ambient conditions
в—Џ EN 50125-2	Yes; Stationary electrical equipment - see ambient conditions	Yes; Stationary electrical equipment - see ambient conditions	Yes; Stationary electrical equipment - see ambient conditions
в—Џ EN 50125-3	Yes; Signal and telecommunications systems - see ambient conditions; vibrations and shocks: Application point outside of tracks (1 m to 3 m away from track)	Yes; Signal and telecommunications systems - see ambient conditions; vibrations and shocks: Application point outside of tracks (1 m to 3 m away from track)	Yes; Signal and telecommunications systems - see ambient conditions; vibrations and shocks: Application point outside of tracks (1 m to 3 m away from track)
в—Џ EN 50155	Yes; Rail vehicles - temperature class Tx, horizontal mounting position, salt spray Class ST2	Yes; Rail vehicles - temperature class Tx, horizontal mounting position, salt spray Class ST2	Yes; Rail vehicles - temperature class Tx, horizontal mounting position, salt spray Class ST2
в—Џ EN 61373	Yes; Rail vehicles - vibrations and shocks: Category 1 Class A/B	Yes; Rail vehicles - vibrations and shocks: Category 1 Class A/B	Yes; Rail vehicles - vibrations and shocks: Category 1 Class A/B
в—Џ Fire protection acc. to EN 45545-2	Yes; Rail vehicles - verification on request	Yes; Rail vehicles - verification on request	Yes; Rail vehicles - verification on request
Ambient conditions
Ambient temperature during operation
в—Џ horizontal installation, min.	-40 °C; = Tmin	-40 °C; = Tmin	-40 °C; = Tmin
в—Џ horizontal installation, max.	70 °C; = Tmax; +85 °C for 10 min (Tx acc. to EN 50155)	70 °C; = Tmax; +85 °C for 10 min (Tx acc. to EN 50155)	70 °C; = Tmax; +85 °C for 10 min (Tx acc. to EN 50155)
Altitude during operation relating to sea level
в—Џ Ambient air temperature-barometric pressure-altitude	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)
Relative humidity
в—Џ With condensation, tested in accordance with IEC 60068-2-38, max.	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Use in stationary industrial systems
вЂ” to biologically active substances according to EN 60721-3-3	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request
вЂ” to chemically active substances according to EN 60721-3-3	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
вЂ” to mechanically active substances according to EN 60721-3-3	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Use on land craft, rail vehicles and special-purpose vehicles
вЂ” to biologically active substances according to EN 60721-3-5	Yes; Class 5B2 mold, fungus and dry rot spores (with the exception of fauna); Class 5B3 on request	Yes; Class 5B2 mold, fungus and dry rot spores (with the exception of fauna); Class 5B3 on request	Yes; Class 5B2 mold, fungus and dry rot spores (with the exception of fauna); Class 5B3 on request
вЂ” to chemically active substances according to EN 60721-3-5	Yes; Class 5C3 (RH < 75%) including salt spray according to EN 50155 (ST2). The supplied plug covers must remain in place over the unused interfaces during operation!	Yes; Class 5C3 (RH < 75%) including salt spray according to EN 50155 (ST2). The supplied plug covers must remain in place over the unused interfaces during operation!	Yes; Class 5C3 (RH < 75%) including salt spray according to EN 50155 (ST2). The supplied plug covers must remain in place over the unused interfaces during operation!
вЂ” to mechanically active substances according to EN 60721-3-5	Yes; Class 5S3 including sand and dust. The supplied plug covers must remain in place over the unused interfaces during operation!	Yes; Class 5S3 including sand and dust. The supplied plug covers must remain in place over the unused interfaces during operation!	Yes; Class 5S3 including sand and dust. The supplied plug covers must remain in place over the unused interfaces during operation!
Dimensions
Width	15 mm	15 mm	15 mm
Height	73 mm	73 mm	73 mm
Depth	58 mm	58 mm	58 mm
Weights
Weight, approx.	28 g	30 g	30 g
Other
Note:	For use in railway applications, also observe the product information "SIPLUS extreme RAIL" A5E37661960A Online Support article 109736776	For use in railway applications, also observe the product information "SIPLUS extreme RAIL" A5E37661960A Online Support article 109736776	For use in railway applications, also observe the product information "SIPLUS extreme RAIL" A5E37661960A Online Support article 109736776