SIPLUS CM DP for ET 200SP CPU . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SIPLUS CM DP for ET 200SP CPU

| | | | | | | |

Article number		6AG1545-5DA00-2AB0
		SIPLUS ET 200SP CM DP
General information
Product type designation		CM PROFIBUS DP
Installation type/mounting
Rack mounting		No
Rail mounting		Yes; Standard - DIN rail
Supply voltage
Rated value (DC)		24 V
permissible range, lower limit (DC)		19.2 V
permissible range, upper limit (DC)		28.8 V
Reverse polarity protection		Yes
Interfaces
Number of PROFIBUS interfaces		1
1. Interface
Interface types
в—Џ RS 485		Yes
Functionality
в—Џ PROFIBUS DP master		Yes
в—Џ PROFIBUS DP slave		Yes
в—Џ SIMATIC communication		Yes
RS 485
в—Џ Transmission rate, max.		12 Mbit/s
в—Џ Cable length, max.		100 m
Protocols
PROFIBUS DP master
Services
вЂ” PG/OP communication		Yes
вЂ” S7 routing		Yes
вЂ” Data record routing		Yes
вЂ” Isochronous mode		No
вЂ” Equidistance		No
вЂ” Number of DP slaves		125
вЂ” Activation/deactivation of DP slaves		Yes
PROFIBUS DP slave
в—Џ Transmission rate, max.		12 Mbit/s
в—Џ automatic baud rate search		Yes
в—Џ Address area, max.		120
в—Џ User data per address area, max.		128 byte
Services
вЂ” PG/OP communication		Yes; Only with active interface
вЂ” Routing		Yes; Only with active interface
вЂ” S7 communication		Yes; Only with active interface
вЂ” Direct data exchange (slave-to-slave communication)		Yes; No subscriber possible - only passive publisher
вЂ” DPV1		Yes
Transfer memory
вЂ” Inputs		244 byte
вЂ” Outputs		244 byte
Interrupts/diagnostics/status information
Diagnostics function		Yes
Diagnostics indication LED
в—Џ for module diagnostics		Yes; green/red DIAG LED
Potential separation
between backplane bus and interface		Yes
Ambient conditions
Ambient temperature during operation
в—Џ horizontal installation, min.		-40 °C; = Tmin; Startup @ -25 °C
в—Џ horizontal installation, max.		60 °C; = Tmax
в—Џ vertical installation, min.		-40 °C; = Tmin; Startup @ -25 °C
в—Џ vertical installation, max.		50 °C; = Tmax
Altitude during operation relating to sea level
в—Џ Ambient air temperature-barometric pressure-altitude		Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
Relative humidity
в—Џ With condensation, tested in accordance with IEC 60068-2-38, max.		100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Use in stationary industrial systems
вЂ” to biologically active substances according to EN 60721-3-3		Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request
вЂ” to chemically active substances according to EN 60721-3-3		Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
вЂ” to mechanically active substances according to EN 60721-3-3		Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Dimensions
Width		35 mm
Height		117 mm
Depth		75 mm
Weights
Weight, approx.		80 g