CPU 1512C-1 PN . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на CPU 1512C-1 PN

| | | | | | | |

Article number		6ES7512-1CK00-0AB0
		CPU 1512C-1 PN, 250 KB PROG, 1 MB DATA
General information
Product type designation		CPU 1512C-1 PN
HW functional status		FS03
Firmware version		V2.1
Engineering with
в—Џ STEP 7 TIA Portal configurable/integrated as of version		V14 SP1 (FW V2.1) / V13 SP1 Update 4 (FW V1.8) or higher
Configuration control
via dataset		Yes
Display
Screen diagonal [cm]		3.45 cm
Control elements
Number of keys		6
Mode selector switch		1
Supply voltage
Type of supply voltage		24 V DC
permissible range, lower limit (DC)		19.2 V; 20.4 V DC, for supplying the digital inputs/outputs
permissible range, upper limit (DC)		28.8 V
Reverse polarity protection		Yes
Mains buffering
в—Џ Mains/voltage failure stored energy time		5 ms; Refers to the power supply on the CPU section
Input current
Current consumption (rated value)		0.8 A; Digital onboard I/O modules are supplied separately
Inrush current, max.		1.9 A; Rated value
IІt		0.34 AІ·s
Digital inputs
в—Џ from load voltage L+ (without load), max.		20 mA; per group
Digital outputs
в—Џ from load voltage L+, max.		30 mA; Per group, without load
Output voltage
Rated value (DC)		24 V
Encoder supply
Number of outputs		2; One common 24 V encoder supply per 16 digital inputs
24 V encoder supply
в—Џ 24 V		Yes; L+ (-0.8 V)
в—Џ Short-circuit protection		Yes
в—Џ Output current, max.		1 A
Power
Infeed power to the backplane bus		10 W
Power consumption from the backplane bus (balanced)		9 W
Power loss
Power loss, typ.		15.2 W
Memory
Number of slots for SIMATIC memory card		1
SIMATIC memory card required		Yes
Work memory
в—Џ integrated (for program)		250 kbyte
в—Џ integrated (for data)		1 Mbyte
Load memory
в—Џ Plug-in (SIMATIC Memory Card), max.		32 Gbyte
Backup
в—Џ maintenance-free		Yes
CPU processing times
for bit operations, typ.		48 ns
for word operations, typ.		58 ns
for fixed point arithmetic, typ.		77 ns
for floating point arithmetic, typ.		307 ns
CPU-blocks
Number of elements (total)		2 000; Blocks (OB, FB, FC, DB) and UDTs
DB
в—Џ Number range		1 ... 60 999; subdivided into: number range that can be used by the user: 1 ... 59 999, and number range of DBs created via SFC 86: 60 000 ... 60 999
в—Џ Size, max.		1 Mbyte; For non-optimized block accesses, the max. size of the DB is 64 KB
FB
в—Џ Number range		0 ... 65 535
в—Џ Size, max.		250 kbyte
FC
в—Џ Number range		0 ... 65 535
в—Џ Size, max.		250 kbyte
OB
в—Џ Size, max.		250 kbyte
в—Џ Number of free cycle OBs		100
в—Џ Number of time alarm OBs		20
в—Џ Number of delay alarm OBs		20
в—Џ Number of cyclic interrupt OBs		20; With minimum OB 3x cycle of 500 µs
в—Џ Number of process alarm OBs		50
в—Џ Number of DPV1 alarm OBs		3
в—Џ Number of isochronous mode OBs		1
в—Џ Number of technology synchronous alarm OBs		2
в—Џ Number of startup OBs		100
в—Џ Number of asynchronous error OBs		4
в—Џ Number of synchronous error OBs		2
в—Џ Number of diagnostic alarm OBs		1
Nesting depth
в—Џ per priority class		24
Counters, timers and their retentivity
S7 counter
в—Џ Number		2 048
Retentivity
вЂ” adjustable		Yes
IEC counter
в—Џ Number		Any (only limited by the main memory)
Retentivity
вЂ” adjustable		Yes
S7 times
в—Џ Number		2 048
Retentivity
вЂ” adjustable		Yes
IEC timer
в—Џ Number		Any (only limited by the main memory)
Retentivity
вЂ” adjustable		Yes
Data areas and their retentivity
Retentive data area (incl. timers, counters, flags), max.		128 kbyte; In total; available retentive memory for bit memories, timers, counters, DBs, and technology data (axes): 88 KB
Extended retentive data area (incl. timers, counters, flags), max.		1 Mbyte; When using PS 60W 24/48/60V DC HF
Flag
в—Џ Number, max.		16 kbyte
в—Џ Number of clock memories		8; 8 clock memory bits, grouped into one clock memory byte
Data blocks
в—Џ Retentivity adjustable		Yes
в—Џ Retentivity preset		No
Local data
в—Џ per priority class, max.		64 kbyte; max. 16 KB per block
Address area
Number of IO modules		2 048; max. number of modules / submodules
I/O address area
в—Џ Inputs		32 kbyte; All inputs are in the process image
в—Џ Outputs		32 kbyte; All outputs are in the process image
per integrated IO subsystem
вЂ” Inputs (volume)		8 kbyte
вЂ” Outputs (volume)		8 kbyte
per CM/CP
вЂ” Inputs (volume)		8 kbyte
вЂ” Outputs (volume)		8 kbyte
Subprocess images
в—Џ Number of subprocess images, max.		32
Hardware configuration
Number of distributed IO systems		32; A distributed I/O system is characterized not only by the integration of distributed I/O via PROFINET or PROFIBUS communication modules, but also by the connection of I/O via AS-i master modules or links (e.g. IE/PB-Link)
Number of DP masters
в—Џ Via CM		6; A maximum of 6 CMs/CPs (PROFIBUS, PROFINET, Ethernet) can be inserted in total
Number of IO Controllers
в—Џ integrated		1
в—Џ Via CM		6; A maximum of 6 CMs/CPs (PROFIBUS, PROFINET, Ethernet) can be inserted in total
Rack
в—Џ Modules per rack, max.		32; CPU + 31 modules
в—Џ Number of lines, max.		1
PtP CM
в—Џ Number of PtP CMs		the number of connectable PtP CMs is only limited by the number of available slots
Time of day
Clock
в—Џ Type		Hardware clock
в—Џ Backup time		6 wk; At 40 °C ambient temperature, typically
в—Џ Deviation per day, max.		10 s; Typ.: 2 s
Operating hours counter
в—Џ Number		16
Clock synchronization
в—Џ supported		Yes
в—Џ in AS, master		Yes
в—Џ in AS, slave		Yes
в—Џ on Ethernet via NTP		Yes
Digital inputs
integrated channels (DI)		32
Digital inputs, parameterizable		Yes
Source/sink input		P-reading
Input characteristic curve in accordance with IEC 61131, type 3		Yes
Digital input functions, parameterizable
в—Џ Gate start/stop		Yes
в—Џ Capture		Yes
в—Џ Synchronization		Yes
Input voltage
в—Џ Type of input voltage		DC
в—Џ Rated value (DC)		24 V
в—Џ for signal "0"		-3 to +5V
в—Џ for signal "1"		+11 to +30V
Input current
в—Џ for signal "1", typ.		2.5 mA
Input delay (for rated value of input voltage)
for standard inputs
вЂ” parameterizable		Yes; none / 0.05 / 0.1 / 0.4 / 1.6 / 3.2 / 12.8 / 20 ms
вЂ” at "0" to "1", min.		4 µs; for parameterization "none"
вЂ” at "0" to "1", max.		20 ms
вЂ” at "1" to "0", min.		4 µs; for parameterization "none"
вЂ” at "1" to "0", max.		20 ms
for interrupt inputs
вЂ” parameterizable		Yes; Same as for standard inputs
for counter/technological functions
вЂ” parameterizable		Yes; Same as for standard inputs
Cable length
в—Џ shielded, max.		1 000 m; 600 m for technological functions; depending on input frequency, encoder and cable quality; max. 50 m at 100 kHz
в—Џ unshielded, max.		600 m; For technological functions: No
Digital outputs
Type of digital output		Transistor
integrated channels (DO)		32
Current-sourcing		Yes; Push-pull output
Short-circuit protection		Yes; electronic/thermal
в—Џ Response threshold, typ.		1.6 A with standard output, 0.5 A with high-speed output; see manual for details
Limitation of inductive shutdown voltage to		-0.8 V
Controlling a digital input		Yes
Accuracy of pulse duration		Up to ±100 ppm ±2 Ојs at high-speed output; see manual for details
minimum pulse duration		2 µs; With High Speed output
Digital output functions, parameterizable
в—Џ Switching tripped by comparison values		Yes; As output signal of a high-speed counter
в—Џ PWM output		Yes
вЂ” Number, max.		4
вЂ” Cycle duration, parameterizable		Yes
вЂ” ON period, min.		0 %
вЂ” ON period, max.		100 %
вЂ” Resolution of the duty cycle		0.0036 %; For S7 analog format, min. 40 ns
в—Џ Frequency output		Yes
в—Џ Pulse train		Yes; also for pulse/direction interface
Switching capacity of the outputs
в—Џ with resistive load, max.		0.5 A; 0.1 A with high-speed output, i.e. when using a high-speed output; see manual for details
в—Џ on lamp load, max.		5 W; 1 W with high-speed output, i.e. when using a high-speed output; see manual for details
Load resistance range
в—Џ lower limit		48 в„¦; 240 ohms with high-speed output, i.e. when using a high-speed output; see manual for details
в—Џ upper limit		12 kв„¦
Output voltage
в—Џ Type of output voltage		DC
в—Џ for signal "0", max.		1 V; With high-speed output, i.e. when using a high-speed output; see manual for details
в—Џ for signal "1", min.		23.2 V; L+ (-0.8 V)
Output current
в—Џ for signal "1" rated value		0.5 A; 0.1 A with high-speed output, i.e. when using a high-speed output, observe derating; see manual for details
в—Џ for signal "1" permissible range, min.		2 mA
в—Џ for signal "1" permissible range, max.		0.6 A; 0.12 A with high-speed output, i.e. when using a high-speed output, observe derating; see manual for details
в—Џ for signal "0" residual current, max.		0.5 mA
Output delay with resistive load
в—Џ "0" to "1", max.		200 µs
в—Џ "1" to "0", max.		500 µs; Load-dependent
for technological functions
вЂ” "0" to "1", max.		5 µs; Depending on the output used, see additional description in manual
вЂ” "1" to "0", max.		5 µs; Depending on the output used, see additional description in manual
Parallel switching of two outputs
в—Џ for logic links		Yes; For technological functions: No
в—Џ for uprating		No
в—Џ for redundant control of a load		Yes; For technological functions: No
Switching frequency
в—Џ with resistive load, max.		100 kHz; For high-speed output, 100 Hz for standard output
в—Џ with inductive load, max.		0.5 Hz; Acc. to IEC 60947-5-1, DC-13; observe derating curve
в—Џ on lamp load, max.		10 Hz
Total current of the outputs
в—Џ Current per channel, max.		0.5 A; see additional description in the manual
в—Џ Current per group, max.		8 A; see additional description in the manual
в—Џ Current per power supply, max.		4 A; 2 power supplies for each group, current per power supply max. 4 A, see additional description in manual
for technological functions
вЂ” Current per channel, max.		0.5 A; see additional description in the manual
Cable length
в—Џ shielded, max.		1 000 m; 600 m for technological functions; depending on output frequency, load, and cable quality; max. 50 m at 100 kHz
в—Џ unshielded, max.		600 m; For technological functions: No
Analog inputs
Number of analog inputs		5; 4x for U/I, 1x for R/RTD
в—Џ For current measurement		4; max.
в—Џ For voltage measurement		4; max.
в—Џ For resistance/resistance thermometer measurement		1
permissible input voltage for voltage input (destruction limit), max.		28.8 V
permissible input current for current input (destruction limit), max.		40 mA
Cycle time (all channels), min.		1 ms; Dependent on the parameterized interference frequency suppression; for details, see conversion procedure in manual
Technical unit for temperature measurement adjustable		Yes; °C/°F/K
Input ranges (rated values), voltages
в—Џ 0 to +10 V		Yes; Physical measuring range: ± 10 V
в—Џ Input resistance (0 to 10 V)		100 kв„¦
в—Џ 1 V to 5 V		Yes; Physical measuring range: ± 10 V
в—Џ Input resistance (1 V to 5 V)		100 kв„¦
в—Џ -10 V to +10 V		Yes
в—Џ Input resistance (-10 V to +10 V)		100 kв„¦
в—Џ -5 V to +5 V		Yes; Physical measuring range: ± 10 V
в—Џ Input resistance (-5 V to +5 V)		100 kв„¦
Input ranges (rated values), currents
в—Џ 0 to 20 mA		Yes; Physical measuring range: ± 20 mA
в—Џ Input resistance (0 to 20 mA)		50 в„¦; Plus approx. 55 ohm for overvoltage protection by PTC
в—Џ -20 mA to +20 mA		Yes
в—Џ Input resistance (-20 mA to +20 mA)		50 в„¦; Plus approx. 55 ohm for overvoltage protection by PTC
в—Џ 4 mA to 20 mA		Yes; Physical measuring range: ± 20 mA
в—Џ Input resistance (4 mA to 20 mA)		50 в„¦; Plus approx. 55 ohm for overvoltage protection by PTC
Input ranges (rated values), resistance thermometer
в—Џ Ni 100		Yes; Standard/climate
в—Џ Input resistance (Ni 100)		10 Mв„¦
в—Џ Pt 100		Yes; Standard/climate
в—Џ Input resistance (Pt 100)		10 Mв„¦
Input ranges (rated values), resistors
в—Џ 0 to 150 ohms		Yes; Physical measuring range: 0 ... 600 ohms
в—Џ Input resistance (0 to 150 ohms)		10 Mв„¦
в—Џ 0 to 300 ohms		Yes; Physical measuring range: 0 ... 600 ohms
в—Џ Input resistance (0 to 300 ohms)		10 Mв„¦
в—Џ 0 to 600 ohms		Yes
в—Џ Input resistance (0 to 600 ohms)		10 Mв„¦
Cable length
в—Џ shielded, max.		800 m; for U/I, 200 m for R/RTD
Analog outputs
integrated channels (AO)		2
Voltage output, short-circuit protection		Yes
Cycle time (all channels), min.		1 ms; Dependent on the parameterized interference frequency suppression; for details, see conversion procedure in manual
Output ranges, voltage
в—Џ 0 to 10 V		Yes
в—Џ 1 V to 5 V		Yes
в—Џ -10 V to +10 V		Yes
Output ranges, current
в—Џ 0 to 20 mA		Yes
в—Џ -20 mA to +20 mA		Yes
в—Џ 4 mA to 20 mA		Yes
Load impedance (in rated range of output)
в—Џ with voltage outputs, min.		1 kв„¦
в—Џ with voltage outputs, capacitive load, max.		100 nF
в—Џ with current outputs, max.		500 в„¦
в—Џ with current outputs, inductive load, max.		1 mH
Cable length
в—Џ shielded, max.		200 m
Analog value generation for the inputs
Integration and conversion time/resolution per channel
в—Џ Resolution with overrange (bit including sign), max.		16 bit
в—Џ Integration time, parameterizable		Yes; 2.5 / 16.67 / 20 / 100 ms, acts on all channels
в—Џ Interference voltage suppression for interference frequency f1 in Hz		400 / 60 / 50 / 10
Smoothing of measured values
в—Џ parameterizable		Yes
в—Џ Step: None		Yes
в—Џ Step: low		Yes
в—Џ Step: Medium		Yes
в—Џ Step: High		Yes
Analog value generation for the outputs
Integration and conversion time/resolution per channel
в—Џ Resolution with overrange (bit including sign), max.		16 bit
Settling time
в—Џ for resistive load		1.5 ms
в—Џ for capacitive load		2.5 ms
в—Џ for inductive load		2.5 ms
Encoder
Connection of signal encoders
в—Џ for voltage measurement		Yes
в—Џ for current measurement as 4-wire transducer		Yes
в—Џ for resistance measurement with two-wire connection		Yes
в—Џ for resistance measurement with three-wire connection		Yes
в—Џ for resistance measurement with four-wire connection		Yes
Connectable encoders
в—Џ 2-wire sensor		Yes
вЂ” permissible quiescent current (2-wire sensor), max.		1.5 mA
Encoder signals, incremental encoder (asymmetrical)
в—Џ Input voltage		24 V
в—Џ Input frequency, max.		100 kHz
в—Џ Counting frequency, max.		400 kHz; with quadruple evaluation
в—Џ Signal filter, parameterizable		Yes
в—Џ Incremental encoder with A/B tracks, 90° phase offset		Yes
в—Џ Incremental encoder with A/B tracks, 90° phase offset and zero track		Yes
в—Џ Pulse encoder		Yes
в—Џ Pulse encoder with direction		Yes
в—Џ Pulse encoder with one impulse signal per count direction		Yes
Errors/accuracies
Linearity error (relative to input range), (+/-)		0.1 %
Temperature error (relative to input range), (+/-)		0.005 %/K
Crosstalk between the inputs, max.		-60 dB
Repeat accuracy in steady state at 25 °C (relative to input range), (+/-)		0.05 %
Output ripple (relative to output range, bandwidth 0 to 50 kHz), (+/-)		0.02 %
Linearity error (relative to output range), (+/-)		0.15 %
Temperature error (relative to output range), (+/-)		0.005 %/K
Crosstalk between the outputs, max.		-80 dB
Repeat accuracy in steady state at 25 °C (relative to output range), (+/-)		0.05 %
Operational error limit in overall temperature range
в—Џ Voltage, relative to input range, (+/-)		0.3 %
в—Џ Current, relative to input range, (+/-)		0.3 %
в—Џ Resistance, relative to input range, (+/-)		0.3 %
в—Џ Resistance thermometer, relative to input range, (+/-)		Pt100 Standard: ±2 K, Pt100 Climate: ±1 K, Ni100 Standard: ±1.2 K, Ni100 Climate: ±1 K
в—Џ Voltage, relative to output range, (+/-)		0.3 %
в—Џ Current, relative to output range, (+/-)		0.3 %
Basic error limit (operational limit at 25 °C)
в—Џ Voltage, relative to input range, (+/-)		0.2 %
в—Џ Current, relative to input range, (+/-)		0.2 %
в—Џ Resistance, relative to input range, (+/-)		0.2 %
в—Џ Resistance thermometer, relative to input range, (+/-)		Pt100 Standard: ±1 K, Pt100 Climate: ±0.5 K, Ni100 Standard: ±0.6 K, Ni100 Climate: ±0.5 K
в—Џ Voltage, relative to output range, (+/-)		0.2 %
в—Џ Current, relative to output range, (+/-)		0.2 %
Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency
в—Џ Series mode interference (peak value of interference < rated value of input range), min.		30 dB
в—Џ Common mode voltage, max.		10 V
в—Џ Common mode interference, min.		60 dB; at 400 Hz: 50 dB
Interfaces
Number of PROFINET interfaces		1
1. Interface
Interface types
в—Џ Number of ports		2
в—Џ integrated switch		Yes
в—Џ RJ 45 (Ethernet)		Yes; X1
Functionality
в—Џ IP protocol		Yes; IPv4
в—Џ PROFINET IO Controller		Yes
в—Џ PROFINET IO Device		Yes
в—Џ SIMATIC communication		Yes
в—Џ Open IE communication		Yes
в—Џ Web server		Yes
в—Џ Media redundancy		Yes
PROFINET IO Controller
Services
вЂ” PG/OP communication		Yes
вЂ” S7 routing		Yes
вЂ” Isochronous mode		Yes
вЂ” Open IE communication		Yes
вЂ” IRT		Yes
вЂ” MRP		Yes; As MRP redundancy manager and/or MRP client; max. number of devices in the ring: 50
вЂ” MRPD		Yes; Requirement: IRT
вЂ” Prioritized startup		Yes; Max. 32 PROFINET devices
вЂ” Number of connectable IO Devices, max.		128; In total, up to 512 distributed I/O devices can be connected via AS-i, PROFIBUS or PROFINET
вЂ” Of which IO devices with IRT, max.		64
вЂ” Number of connectable IO Devices for RT, max.		128
вЂ” of which in line, max.		128
вЂ” Number of IO Devices that can be simultaneously activated/deactivated, max.		8; in total across all interfaces
вЂ” Number of IO Devices per tool, max.		8
вЂ” Updating times		The minimum value of the update time also depends on communication share set for PROFINET IO, on the number of IO devices, and on the quantity of configured user data
Update time for IRT
вЂ” for send cycle of 250 µs		250 Ојs to 4 ms; Note: In the case of IRT with isochronous mode, the minimum update time of 625 µs of the isochronous OB is decisive
вЂ” for send cycle of 500 µs		500 Ојs to 8 ms; Note: In the case of IRT with isochronous mode, the minimum update time of 625 µs of the isochronous OB is decisive
вЂ” for send cycle of 1 ms		1 ms to 16 ms
вЂ” for send cycle of 2 ms		2 ms to 32 ms
вЂ” for send cycle of 4 ms		4 ms to 64 ms
вЂ” With IRT and parameterization of "odd" send cycles		Update time = set "odd" send clock (any multiple of 125 µs: 375 µs, 625 µs ... 3 875 µs)
Update time for RT
вЂ” for send cycle of 250 µs		250 µs to 128 ms
вЂ” for send cycle of 500 µs		500 µs to 256 ms
вЂ” for send cycle of 1 ms		1 ms to 512 ms
вЂ” for send cycle of 2 ms		2 ms to 512 ms
вЂ” for send cycle of 4 ms		4 ms to 512 ms
PROFINET IO Device
Services
вЂ” PG/OP communication		Yes
вЂ” S7 routing		Yes
вЂ” Isochronous mode		No
вЂ” Open IE communication		Yes
вЂ” IRT		Yes
вЂ” MRP		Yes
вЂ” MRPD		Yes; Requirement: IRT
вЂ” PROFIenergy		Yes
вЂ” Shared device		Yes
вЂ” Number of IO Controllers with shared device, max.		4
Interface types
RJ 45 (Ethernet)
в—Џ 100 Mbps		Yes
в—Џ Autonegotiation		Yes
в—Џ Autocrossing		Yes
в—Џ Industrial Ethernet status LED		Yes
Protocols
Number of connections
в—Џ Number of connections, max.		128; via integrated interfaces of the CPU and connected CPs / CMs
в—Џ Number of connections reserved for ES/HMI/web		10
в—Џ Number of connections via integrated interfaces		88
в—Џ Number of S7 routing paths		16
PROFINET IO Controller
Services
вЂ” PG/OP communication		Yes
вЂ” S7 routing		Yes
вЂ” Isochronous mode		Yes
вЂ” Open IE communication		Yes
вЂ” IRT		Yes
вЂ” MRP		Yes; As MRP redundancy manager and/or MRP client; max. number of devices in the ring: 50
вЂ” MRPD		Yes; Requirement: IRT
вЂ” PROFIenergy		Yes
вЂ” Prioritized startup		Yes; Max. 32 PROFINET devices
вЂ” Number of connectable IO Devices, max.		128; In total, up to 512 distributed I/O devices can be connected via AS-i, PROFIBUS or PROFINET
вЂ” Of which IO devices with IRT, max.		64
вЂ” Number of connectable IO Devices for RT, max.		128
вЂ” of which in line, max.		128
вЂ” Number of IO Devices that can be simultaneously activated/deactivated, max.		8; in total across all interfaces
вЂ” Number of IO Devices per tool, max.		8
вЂ” Updating times		The minimum value of the update time also depends on communication share set for PROFINET IO, on the number of IO devices, and on the quantity of configured user data
SIMATIC communication
в—Џ S7 communication, as server		Yes
в—Џ S7 communication, as client		Yes
в—Џ User data per job, max.		See online help (S7 communication, user data size)
Open IE communication
в—Џ TCP/IP		Yes
вЂ” Data length, max.		64 kbyte
вЂ” several passive connections per port, supported		Yes
в—Џ ISO-on-TCP (RFC1006)		Yes
вЂ” Data length, max.		64 kbyte
в—Џ UDP		Yes
вЂ” Data length, max.		1 472 byte
вЂ” UDP multicast		Yes; Max. 5 multicast circuits
в—Џ DHCP		No
в—Џ SNMP		Yes
в—Џ DCP		Yes
в—Џ LLDP		Yes
Web server
в—Џ HTTP		Yes; Standard and user pages
в—Џ HTTPS		Yes; Standard and user pages
OPC UA
в—Џ OPC UA Server		Yes; Data access (read, write, subscribe), runtime license required
вЂ” Application authentication		Yes
вЂ” Security policies		Available security policies: None, Basic128Rsa15, Basic256Rsa15, Basic256Sha256
вЂ” User authentication		"anonymous" or by user name & password
Further protocols
в—Џ MODBUS		Yes; MODBUS TCP
Media redundancy
в—Џ Switchover time on line break, typ.		200 ms; For MRP, bumpless for MRPD
в—Џ Number of stations in the ring, max.		50
Isochronous mode
Isochronous operation (application synchronized up to terminal)		Yes; With minimum OB 6x cycle of 625 µs
Equidistance		Yes
S7 message functions
Number of login stations for message functions, max.		32
Program alarms		Yes
Number of configurable program alarms		5 000
Number of simultaneously active program alarms
в—Џ Number of program alarms		300
в—Џ Number of alarms for system diagnostics		100
в—Џ Number of alarms for motion technology objects		80
Test commissioning functions
Joint commission (Team Engineering)		Yes; Parallel online access possible for up to 5 engineering systems
Status block		Yes; Up to 8 simultaneously (in total across all ES clients)
Single step		No
Status/control
в—Џ Status/control variable		Yes
в—Џ Variables		Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters
в—Џ Number of variables, max.
вЂ” of which status variables, max.		200; per job
вЂ” of which control variables, max.		200; per job
Forcing
в—Џ Forcing, variables		Peripheral inputs/outputs
в—Џ Number of variables, max.		200
Diagnostic buffer
в—Џ present		Yes
в—Џ Number of entries, max.		1 000
вЂ” of which powerfail-proof		500
Traces
в—Џ Number of configurable Traces		4; Up to 512 KB of data per trace are possible
Interrupts/diagnostics/status information
Alarms
в—Џ Diagnostic alarm		Yes
в—Џ Hardware interrupt		Yes
Diagnostic messages
в—Џ Monitoring the supply voltage		Yes
в—Џ Wire-break		Yes; for analog inputs/outputs, see description in manual
в—Џ Short-circuit		Yes; for analog outputs, see description in manual
в—Џ A/B transition error at incremental encoder		Yes
Diagnostics indication LED
в—Џ RUN/STOP LED		Yes
в—Џ ERROR LED		Yes
в—Џ MAINT LED		Yes
в—Џ Monitoring of the supply voltage (PWR-LED)		Yes
в—Џ Channel status display		Yes
в—Џ for channel diagnostics		Yes; For analog inputs/outputs
в—Џ Connection display LINK TX/RX		Yes
Supported technology objects
Motion Control		Yes; Note: The number of axes affects the cycle time of the PLC program; selection guide via the TIA Selection Tool or SIZER
в—Џ Number of available Motion Control resources for technology objects (except cam disks)		800
в—Џ Required Motion Control resources
вЂ” per speed-controlled axis		40
вЂ” per positioning axis		80
вЂ” per synchronous axis		160
вЂ” per external encoder		80
вЂ” per output cam		20
вЂ” per cam track		160
вЂ” per probe		40
в—Џ Positioning axis
вЂ” Number of positioning axes at motion control cycle of 4 ms (typical value)		5
вЂ” Number of positioning axes at motion control cycle of 8 ms (typical value)		10
Controller
в—Џ PID_Compact		Yes; Universal PID controller with integrated optimization
в—Џ PID_3Step		Yes; PID controller with integrated optimization for valves
в—Џ PID-Temp		Yes; PID controller with integrated optimization for temperature
Counting and measuring
в—Џ High-speed counter		Yes
Integrated Functions
Number of counters		6
Counting frequency (counter) max.		400 kHz; with quadruple evaluation
Counting functions
в—Џ Continuous counting		Yes
в—Џ Counter response parameterizable		Yes
в—Џ Hardware gate via digital input		Yes
в—Џ Software gate		Yes
в—Џ Event-controlled stop		Yes
в—Џ Synchronization via digital input		Yes
в—Џ Counting range, parameterizable		Yes
Comparator
вЂ” Number of comparators		2; per count channel; see manual for details
вЂ” Direction dependency		Yes
вЂ” Can be changed from user program		Yes
Position detection
в—Џ Incremental acquisition		Yes
в—Џ Suitable for S7-1500 Motion Control		Yes
Measuring functions
в—Џ Measuring time, parameterizable		Yes
в—Џ Dynamic measurement period adjustment		Yes
в—Џ Number of thresholds, parameterizable		2
Measuring range
вЂ” Frequency measurement, min.		0.04 Hz
вЂ” Frequency measurement, max.		400 kHz; with quadruple evaluation
вЂ” Cycle duration measurement, min.		2.5 µs
вЂ” Cycle duration measurement, max.		25 s
Accuracy
вЂ” Frequency measurement		100 ppm; depending on measuring interval and signal evaluation
вЂ” Cycle duration measurement		100 ppm; depending on measuring interval and signal evaluation
вЂ” Velocity measurement		100 ppm; depending on measuring interval and signal evaluation
Potential separation
Potential separation digital inputs
в—Џ between the channels		No
в—Џ between the channels, in groups of		16
Potential separation digital outputs
в—Џ between the channels		No
в—Џ between the channels, in groups of		16
Potential separation channels
в—Џ between the channels and backplane bus		Yes
в—Џ Between the channels and load voltage L+		No
Isolation
Isolation tested with		707 V DC (type test)
Ambient conditions
Ambient temperature during operation
в—Џ horizontal installation, min.		0 °C
в—Џ horizontal installation, max.		60 °C; Note derating data for onboard I/O in the manual. Display: 50 °C, at an operating temperature of typically 50 °C, the display is switched off
в—Џ vertical installation, min.		0 °C
в—Џ vertical installation, max.		40 °C; Note derating data for onboard I/O in the manual. Display: 40 °C, at an operating temperature of typically 40 °C, the display is switched off
Ambient temperature during storage/transportation
в—Џ min.		-40 °C
в—Џ max.		70 °C
Configuration
Programming
Programming language
вЂ” LAD		Yes
вЂ” FBD		Yes
вЂ” STL		Yes
вЂ” SCL		Yes
вЂ” GRAPH		Yes
Know-how protection
в—Џ User program protection/password protection		Yes
в—Џ Copy protection		Yes
в—Џ Block protection		Yes
Access protection
в—Џ Password for display		Yes
в—Џ Protection level: Write protection		Yes
в—Џ Protection level: Read/write protection		Yes
в—Џ Protection level: Complete protection		Yes
Cycle time monitoring
в—Џ lower limit		adjustable minimum cycle time
в—Џ upper limit		adjustable maximum cycle time
Dimensions
Width		110 mm
Height		147 mm
Depth		129 mm
Weights
Weight, approx.		1 360 g