SIDOOR ATE500E elevator door drive . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SIDOOR ATE500E elevator door drive

| | | | | | | | |

Article number	6FB1211-5AT10-7AT2	6FB1211-1AT10-7AT3
	SIDOOR ATE500E RELAY	SIDOOR ATE500E CAN
General information
Product brand name	SIDOOR
Product designation	Door controller
Product version	ATE500E Relais	ATE500E CAN
Optional product expansion	Mains transformer (6FB1112-0AT20-2TR0), NT40 (6FB1112-0AT20-3PS0)
Manufacturer's article no. of the usable motor	6FB1203-0AT12-7DA0
Manufacturer's article no. of the usable power supply unit	6FB1112-0AT20-2TR0, 6FB1112-0AT20-3PS0
Installation type/mounting
Installation and mounting instructions	No direct sunlight, requirements specific to the end application must be observed. NFPA industry environment: Installation outside a control cabinet only horizontal. NFPA elevator environment: Must be installed in a fire protection enclosure
Supply voltage
Rated value (DC)	36 V; with MED280: At 24 V DC max. door speed of 500 mm/s; at 28.8 V DC max. door speed of 800 mm/s
Input current
IІt, min.	30 AІ·s
Power
Active power input (standby mode)	5 W	6 W
Digital inputs
Control inputs isolated	Yes
Control inputs p-switching	Yes
Protection in case of DC supply	Use of a circuit breaker in the supply path according to 60898-1, 8A, C-characteristic type SIEMENS: 5SY4108-7 or 5SY4108-7KK11
Input voltage
в—Џ per DC input, min.	10 V; Observe polarity !
в—Џ per DC input, max.	28 V; Observe polarity !
Input current
в—Џ per DC input, min.	3 mA
в—Џ per DC input, max.	15 mA
Digital outputs
short-circuit proof	Yes
Overload-proof	Yes
Remark	Ensure correct polarity! CAUTION: Do not supply with external voltage!
Output voltage
в—Џ Output voltage (DC)	24 V
Output current
в—Џ For output (24 V DC), max.	400 mA
Relay outputs
Switching capacity of contacts
вЂ” at 30 V DC, min.	0.01 A
вЂ” at 30 V DC, max.	1 A	0.5 A
вЂ” at 50 V DC, min.	0.01 A; 50 V DC switching voltage not released for NFPA-relevant countries
вЂ” at 50 V DC, max.	1 A; 50 V DC switching voltage not released for NFPA-relevant countries
вЂ” at 230 V AC, min.	0.01 A
вЂ” at 230 V AC, max.	1 A
Mechanical data
Opening width of door, min.	0.3 m
Opening width of door, max.	5 m
Weight of door, max.	280 kg
Operating cycle frequency of door, max.	180 1/h
Kinetic energy, max.	75 J
Counterweight
в—Џ with SIDOOR MED280 direct drive, max.	6 kg
Interfaces
Interfaces/bus type	without	CANopen, CiA standard 301, profile 417
Number of bus nodes		32
Isolation
Overvoltage category	2
Degree and class of protection
IP degree of protection	IP20
Standards, approvals, certificates
Certificate of suitability according to EN 81	Yes
CE mark	Yes
UL approval	Yes
EAC (formerly Gost-R)	Yes
TГњV Inspectorate approval	Yes
TГњV prototype tested	Yes
China RoHS compliance	Yes
Standard for EMC	EN 12015 / EN 12016 / EN 61000-6-2 / EN 61000-6-4 / EN 61326-3-1
Standard for safety	EN 60335-1 / EN 60950-1 / EN 81-20 / UL 61010-1 / UL 61010-2-201 / EN ISO 13849-1 Cat. 2 PL d / IEC 62061: SIL 2
Ambient conditions
Ambient temperature during operation
в—Џ min.	-25 °C
в—Џ max.	50 °C
в—Џ Remark	Bolt the controller onto a metal mounting surface so that thermal conductivity is ensured
Ambient temperature during storage/transportation
в—Џ Storage, min.	-40 °C
в—Џ Storage, max.	85 °C
Air pressure acc. to IEC 60068-2-13
в—Џ Installation altitude above sea level, max.	2 000 m
Relative humidity
в—Џ No condensation, min.	10 %
в—Џ No condensation, max.	93 %
Mechanics/material
Service life
в—Џ Mean time between failures (MTBF)	19 y
Dimensions
Width	320 mm
Height	60 mm
Depth	80 mm