The SIMOTICS T-1FW6 built-in torque motors supplied via the SINAMICS S120 drive system are designed for operation on a 600 V DC link voltage level. The cable connection is brought out of the front face of the stator. The cable end has a pre-assembled connector or exposed cable cores depending on the motor version. The length of the power and signal cables from the motor to the drive system must not exceed 50 m (164 ft). Absolute measuring systems with DRIVE-CLiQMeasuring systems with integrated DRIVE-CLiQ interface are available from various manufacturers. The encoders can be used as motor feedback system. The current overview of manufacturers and available measuring systems can be viewed on the Internet at: http://support.automation.siemens.com/WW/view/en/65402168 It is also possible to use absolute measuring systems with EnDat 2.1 or incremental systems with 1 Vpp. |
| Каталог 2018 | Каталог 2017 | Каталог 2016 | Каталог 2015 | Каталог 2014 | Каталог 2013 | Каталог 2012 | Сертификат | Контакты | Карта сайта | Поиск |
