IFN VIB-ACC . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на IFN VIB-ACC

| | | | | | | | |

Article number		6AT8000-1BB00-4XA0
		SIPLUS CMS4000 Interface Node VIB-A
General information
Product brand name		SIPLUS
Product designation		IFN VIB-ACC
Product description		Six IEPE sensor signals or five IEPE sensor signals and one analog input signal (e.g. for speed) are measured with the IFN VIB-A.
Installation type/mounting
Mounting type		standard rail
Mounting accessories		Mounting bracket, can be ordered as option
Required clearance
в—Џ for side-by-side mounting at the top		25 mm
в—Џ for side-by-side mounting at the front		80 mm
в—Џ for side-by-side mounting at the back		25 mm
Supply voltage
Reverse polarity protection		Yes
Overvoltage protection		max. 35 V
Input current
from external supply (24 V DC), max.		0.2 A
Analog inputs
Number of analog inputs		1
Designation of the analog input		CH6
Measured variable		Voltage
Connector type		Connector plug 5-pole (M12)
Electrical input frequency, min.		0 Hz
Electrical input frequency, max.		1 kHz
Overvoltage strength, min.		-60 V
Overvoltage strength, max.		60 V
Short-circuit detection		No
Input ranges (rated values), voltages
в—Џ At DC, min.		-30 V
Input ranges (rated values), currents
в—Џ with DC		0.012 mA
Analog value generation for the inputs
Parameterizable down sampling frequencies		4 / 8 / 16 / 24 / 48 / 64 / 96 kHz
Sampling frequency, max.		192 kHz
Integration and conversion time/resolution per channel
в—Џ Resolution with override range (bit including sign)		16 bit
Sensor input
Number of sensor inputs		6
Designation of the sensor inputs		CH1 ... CH6
Design of the sensor		IEPE
Overvoltage strength, min.		-60 V
Overvoltage strength, max.		60 V
Open-circuit detection		Yes
Short-circuit detection		Yes
Encoder signals, IEPE
в—Џ Electrical input frequency, min.		0.1 Hz
в—Џ Electrical input frequency, max.		40 kHz
в—Џ Sampling frequency, max.		192 kHz
в—Џ Parameterizable down sampling frequencies		0.014 / 0,33 / 4 / 8 / 16 / 24 / 48 / 64 / 96 kHz
в—Џ Resolution with override range (bit including sign)		16 bit
в—Џ Connector type		Connector plug 5-pole (M12)
Errors/accuracies
Relative measuring accuracy for analog input signals, min.		-1 %
Relative measuring accuracy for analog input signals, max.		1 %
Relative measuring accuracy for IEPE signals, min.		-0.7 %
Relative measuring accuracy for IEPE signals, max.		0.7 %
Crosstalk attenuation between analog input signals at 1 kHz		-78 dB
Crosstalk attenuation between sensor channels CH 1 and CH 2 at 1 kHz		-69 dB
Crosstalk attenuation between sensor channels CH 3 ... CH 6 at 1 kHz		-73 dB
Signal-to-noise ratio for analog input signals		-69 dB
Signal-to-noise ratio between sensor channels CH 1 and CH 2 for IEPE signals		-57 dB
Signal-to-noise ratio between sensor channels CH 3 ... CH 6 for IEPE signals		-70 dB
Interfaces
Number of interfaces		3
Transmission rate		400 Mbit/s
Protocols
Protocol		IEEE 1394a/b
Potential separation
Potential separation analog inputs
в—Џ Potential separation analog inputs		No
Galvanic isolation at sensor input
в—Џ Galvanic isolation at sensor input		No
Degree and class of protection
IP degree of protection		IP67
Standards, approvals, certificates
CE mark		Yes
RCM (formerly C-TICK)		Yes
KC approval		Yes
EAC (formerly Gost-R)		Yes
China RoHS compliance		Yes
Use in hazardous areas
в—Џ ATEX		Yes
в—Џ IECEx		Yes
Ambient conditions
Ambient temperature during operation
в—Џ min.		-40 °C
в—Џ max.		65 °C
Ambient temperature during storage/transportation
в—Џ Storage, min.		-40 °C
в—Џ Storage, max.		85 °C
в—Џ Transportation, min.		-40 °C
в—Џ Transportation, max.		85 °C
Connection method
Design of electrical connection for the PE conductor		M4 screw with contact washer
в—Џ Connectable conductor cross-section for PE terminal		2.5 mmІ
Design of plug-in connection		Connector plug 8-pole (M12)
Design of the pin assignment of the inputs		Male connector 5-pole (M12)
Mechanics/material
Material of housing		aluminum
Dimensions
Width		86 mm
Height		210 mm
Depth		87 mm
Width when mounted on DIN rail		86 mm
Height when mounted on DIN rail		210 mm
Depth when mounted on DIN rail		96 mm
Weights
Weight (without packaging)		1.24 kg