SIPLUS ET 200S 2 PULSE pulse generator . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SIPLUS ET 200S 2 PULSE pulse generator

| | | |

Article number		6AG1138-4DD01-7AB0
		SIPLUS ET200S EM 2 Pulse
Supply voltage
Load voltage L+
в—Џ Rated value (DC)		24 V; From power module
в—Џ Reverse polarity protection		Yes
Input current
from load voltage L+ (without load), max.		40 mA
from backplane bus 3.3 V DC, max.		10 mA
Encoder supply
Type of output voltage		L+ (-0.8 V)
Short-circuit protection		Yes
Output current
в—Џ Rated value		500 mA
Power loss
Power loss, typ.		1.8 W
Digital inputs
Number of digital inputs		2
Input characteristic curve in accordance with IEC 61131, type 2		Yes
Input voltage
в—Џ Rated value (DC)		24 V
в—Џ for signal "0"		-30 to +5V
в—Џ for signal "1"		+11 to +30V
Input current
в—Џ for signal "1", typ.		9 mA
Input delay (for rated value of input voltage)
в—Џ Input frequency (with a time delay of 0.1 ms), max.		20 kHz
в—Џ Minimum pulse width for program reactions		100 µs
Cable length
в—Џ shielded, max.		100 m
Digital outputs
Number of digital outputs		2
Short-circuit protection		Yes
в—Џ Response threshold, typ.		10 A
Limitation of inductive shutdown voltage to		L+ (-50 to -65 V)
Controlling a digital input		Yes
Accuracy of pulse duration		±(time period x 100 ppm), ±100 µs with a load <= 50 ohms
minimum pulse duration		100 µs
Switching capacity of the outputs
в—Џ on lamp load, max.		10 W
Output voltage
в—Џ for signal "1", min.		L+ (-1 V)
Output current
в—Џ for signal "1" rated value		2 A
в—Џ for signal "1" permissible range for 0 to 60 °C, min.		7 mA
в—Џ for signal "1" permissible range for 0 to 60 °C, max.		2 A
в—Џ for signal "0" residual current, max.		0.5 mA
Output delay with resistive load
в—Џ "0" to "1", max.		100 µs
в—Џ "1" to "0", max.		200 µs
Switching frequency
в—Џ with resistive load, max.		5 kHz
в—Џ with inductive load, max.		2 Hz
в—Џ on lamp load, max.		10 Hz
Cable length
в—Џ shielded, max.		1 000 m
в—Џ unshielded, max.		600 m
Encoder
Connectable encoders
в—Џ 2-wire sensor		Yes
вЂ” permissible quiescent current (2-wire sensor), max.		2 mA
Interrupts/diagnostics/status information
Diagnostics indication LED
в—Џ Group error SF (red)		Yes
в—Џ Status indicator digital input (green)		Yes
в—Џ Status indicator digital output (green)		Yes
Integrated Functions
Pulse generator
в—Џ Number of channels		2; 1 digital input and 1 digital output per channel
Potential separation
Potential separation digital inputs
в—Џ between the channels		No
в—Џ between the channels and backplane bus		Yes
Potential separation digital outputs
в—Џ between the channels		No
в—Џ between the channels and backplane bus		Yes
Permissible potential difference
between different circuits		75 V DC/60 V AC
Isolation
Isolation tested with		500 V DC
Ambient conditions
Altitude during operation relating to sea level
в—Џ Ambient air temperature-barometric pressure-altitude		Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
Relative humidity
в—Џ With condensation, tested in accordance with IEC 60068-2-38, max.		100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Resistance
Use in stationary industrial systems
вЂ” to biologically active substances according to EN 60721-3-3		Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request
вЂ” to chemically active substances according to EN 60721-3-3		Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
вЂ” to mechanically active substances according to EN 60721-3-3		Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Dimensions
Width		15 mm
Height		81 mm
Depth		52 mm
Weights
Weight, approx.		40 g