SIPLUS S7-300 analog output module with HART . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SIPLUS S7-300 analog output module with HART

| | | | | |

Article number		6AG1332-8TF01-2AB0
		SIPLUS SM332 8AO HART
Supply voltage
Load voltage L+
в—Џ Rated value (DC)		24 V
в—Џ Reverse polarity protection		Yes
Input current
from load voltage L+ (without load), max.		350 mA
from backplane bus 5 V DC, max.		110 mA
Power loss
Power loss, typ.		6 W
Analog outputs
Number of analog outputs		8
Current output, no-load voltage, max.		24 V
Output ranges, current
в—Џ 0 to 20 mA		Yes
в—Џ -20 mA to +20 mA		No
в—Џ 4 mA to 20 mA		Yes
Load impedance (in rated range of output)
в—Џ with current outputs, max.		750 в„¦
в—Џ with current outputs, inductive load, max.		10 mH
Cable length
в—Џ shielded, max.		800 m
Analog value generation for the outputs
Integration and conversion time/resolution per channel
в—Џ Resolution with overrange (bit including sign), max.		16 bit
Settling time
в—Џ for resistive load		0.1 ms
в—Џ for inductive load		0.5 ms
Errors/accuracies
Operational error limit in overall temperature range
в—Џ Current, relative to output range, (+/-)		0.2 %; ±0.4 % @ < 0 °C or > 60 °C
Basic error limit (operational limit at 25 °C)
в—Џ Current, relative to output range, (+/-)		0.1 %
Interrupts/diagnostics/status information
Diagnostic functions		Yes
Substitute values connectable		Yes
Alarms
в—Џ Diagnostic alarm		Yes
Diagnostic messages
в—Џ Diagnostic information readable		Yes
Diagnostics indication LED
в—Џ Group error SF (red)		Yes
Potential separation
Potential separation analog outputs
в—Џ between the channels and backplane bus		Yes
Isolation
Isolation tested with		500 V DC
Standards, approvals, certificates
CE mark		Yes
UL approval		Yes; File E239877
FM approval		Yes
RCM (formerly C-TICK)		Yes
KC approval		Yes
EAC (formerly Gost-R)		Yes
Ambient conditions
Ambient temperature during operation
в—Џ min.		-25 °C; = Tmin
в—Џ max.		60 °C; = Tmax
Ambient temperature during storage/transportation
в—Џ min.		-40 °C
в—Џ max.		70 °C
Altitude during operation relating to sea level
в—Џ Ambient air temperature-barometric pressure-altitude		Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
Relative humidity
в—Џ With condensation, tested in accordance with IEC 60068-2-38, max.		100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Resistance
Use in stationary industrial systems
вЂ” to biologically active substances according to EN 60721-3-3		Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request
вЂ” to chemically active substances according to EN 60721-3-3		Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
вЂ” to mechanically active substances according to EN 60721-3-3		Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Connection method
required front connector		20-pin
Dimensions
Width		40 mm
Height		125 mm
Depth		117 mm
Weights
Weight, approx.		220 g