SIPLUS S7-400 interface modules . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SIPLUS S7-400 interface modules

| | |

Article number		6AG1964-2AA04-7AB0
		SIPLUS S7-400 IF964-DP
General information
Product type designation		IF 964-DP
Input current
Current consumption, max.		150 mA; Current consumption from S7-400 bus: The module uses no current at 24 V, it provides this voltage only at the DP interface. Total current consumption of the components connected to the DP interface, but maximum 150 mA. Current carrying capacity of the isolated 5 V (P5ext) maximum 90 mA, current carrying capacity of the 24 V maximum 150 mA.
Power loss
Power loss, typ.		1 W
Interfaces
PROFIBUS DP
в—Џ Cable length, max.		1 200 m; At 9.6 kbit/s: max. 1200 m; at 12 Mbit/s: max. 100 m
1. Interface
Physics		RS 485
Isolated		Yes
Functionality
в—Џ PROFIBUS DP master		Yes; Default setting
в—Џ PROFIBUS DP slave		Yes
DP master
в—Џ Transmission rate, max.		12 Mbit/s
в—Џ Number of DP slaves, max.		125; depending on the CPU used
Services
вЂ” PG/OP communication		Yes
вЂ” Equidistance		Yes
вЂ” SYNC/FREEZE		Yes
вЂ” Direct data exchange (slave-to-slave communication)		Yes
Address area
вЂ” Inputs, max.		device-dependent
вЂ” Outputs, max.		device-dependent
User data per DP slave
вЂ” Inputs, max.		244 byte
вЂ” Outputs, max.		244 byte
Communication functions
Number of connections
в—Џ overall		device-dependent
Ambient conditions
Ambient temperature during operation
в—Џ min.		-25 °C; = Tmin
в—Џ max.		70 °C; = Tmax; @ 60°C for UL/ATEX/FM use
Altitude during operation relating to sea level
в—Џ Ambient air temperature-barometric pressure-altitude		Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
Relative humidity
в—Џ With condensation, tested in accordance with IEC 60068-2-38, max.		100 %; RH incl. condensation/frost permitted (no commissioning in bedewed state)
Resistance
Use in stationary industrial systems
вЂ” to biologically active substances according to EN 60721-3-3		Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request
вЂ” to chemically active substances according to EN 60721-3-3		Yes; Class 3C4 incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
вЂ” to mechanically active substances according to EN 60721-3-3		Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Dimensions
Width		26 mm
Height		54 mm
Depth		130 mm
Weights
Weight, approx.		65 g