PM-E F PROFIsafe F-power module . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на PM-E F PROFIsafe F-power module

| | | |

Article number	6ES7138-4CF03-0AB0	6ES7138-4CF42-0AB0
	ET200S, POWERMOD. PM-E F PM, DC24V	ET200S, POWERMOD. PM-E F PP, DC24V
Supply voltage
Load voltage L+
в—Џ Rated value (DC)	24 V	24 V
в—Џ Reverse polarity protection	No	No
Input current
From load voltage L+ (no load), typ.	100 mA	100 mA
from backplane bus 24 V DC, max.	28 mA	28 mA
Power loss
Power loss, typ.	4 W	4 W
Address area
Occupied address area
в—Џ Inputs	5 byte	5 byte
в—Џ Outputs	5 byte	5 byte
Digital outputs
Number of digital outputs	2	1; Relays
Short-circuit protection	Yes; Electronic	No
в—Џ Response threshold, typ.	Response threshold (short-circuit): 5 to 12 A; response threshold (external short-circuit to ground): 5 to 12 A; response threshold (external short-circuit to P potential): 25 to 45 A
Limitation of inductive shutdown voltage to	L+ (-2x 47 V)
Controlling a digital input	No	Yes
Switching capacity of the outputs
в—Џ on lamp load, max.	10 W	100 W
Load resistance range
в—Џ lower limit	12 в„¦
в—Џ upper limit	1 kв„¦
Output voltage
в—Џ for signal "1", min.	L+ (-2,0 V), current sourcing switch: L+ (-1,5 V), voltage drop on current sinking switch: max. 0.5 V
Output current
в—Џ for signal "1" rated value	2 A
в—Џ for signal "1" permissible range for 0 to 60 °C, min.	20 mA
в—Џ for signal "1" permissible range for 0 to 60 °C, max.	2.4 A
в—Џ for signal "0" residual current, max.	0.5 mA
Parallel switching of two outputs
в—Џ for uprating	No
в—Џ for redundant control of a load	No
Switching frequency
в—Џ with resistive load, max.	30 Hz	2 Hz
в—Џ with inductive load, max.	0.1 Hz	0.1 Hz; with inductive load to IEC 60947-5-1, DC-13 / AC-15
в—Џ on lamp load, max.	10 Hz	2 Hz
Total current of the outputs (per group)
horizontal installation
вЂ” up to 40 °C, max.	10 A	10 A
вЂ” up to 55 °C, max.	7 A	8 A
вЂ” up to 60 °C, max.	6 A	7 A
vertical installation
вЂ” up to 40 °C, max.	6 A	8 A
Relay outputs
Switching capacity of contacts
вЂ” with resistive load, up to 50 °C, max.	10 A	10 A
Cable length
в—Џ shielded, max.	200 m
в—Џ unshielded, max.	200 m
Interrupts/diagnostics/status information
Diagnostic functions	Yes	Yes
Diagnostic messages
в—Џ Diagnostic information readable	Yes	Yes
в—Џ Wire-break	Yes	No
в—Џ Short-circuit	Yes	Yes
в—Џ missing load voltage	Yes	Yes
Diagnostics indication LED
в—Џ Rated load voltage PWR (green)	Yes	Yes
в—Џ Group error SF (red)	Yes	Yes
в—Џ Status indicator digital output (green)	Yes	Yes
Potential separation
Potential separation digital outputs
в—Џ between the channels	No	No
в—Џ between the channels and backplane bus	Yes	Yes
в—Џ Between the channels and load voltage L+	No	No
Isolation
Isolation tested with	500 V DC	500 V DC
Standards, approvals, certificates
Highest safety class achievable in safety mode
в—Џ acc. to EN 954	4	4
в—Џ SIL acc. to IEC 61508	Up to SIL 3	With Std-DO: Max. SIL 2, without Std-DO max. SIL 3 depending on configuration
Dimensions
Width	30 mm	30 mm
Height	81 mm	81 mm
Depth	52 mm	52 mm
Weights
Weight, approx.	88 g	80 g