Interfaces | |
- Connection for dedicated line
| 1 x RJ12 |
- RS232 connection for data terminal equipment
| 1 x 9-pin Sub-D connector |
- RS485 connection for data terminal equipment
| 1 x 9-pin Sub-D socket |
- Connection for supply voltage
| 1 x 4-pin terminal block |
Voltage supply | 24 V DC |
Current consumption | |
| 100 mA |
Power loss | 2.4 W |
Permissible ambient conditions | |
| 0 °C … +60 °C |
- Transport/storage temperature
| -40 °C … +70 °C |
| max. 95 % at +25 °C |
Design | |
| Compact module S7-300, double width |
- Dimensions (W x H x D) in mm
| 80 x 125 x 120 |
| approx. 300 g |
Degree of protection | IP20 |
Transmission path | 2-wire, 2 x 2-wire or 4-wire, twisted pair cable, non-coil-loaded or lightly coil-loaded |
Modulation method | Phase-continuous binary frequency modulation (FSK) |
Data transmission rates via the dedicated line | 1200 bit/s 2400 bit/s 9600 bit/s (not for leased telephone lines) 19200 bit/s (not for leased telephone lines) |
Operating mode | |
| Half-duplex |
| Duplex or half-duplex |
Transmission level can be set to | 0 dB -6 dB -9 dB (for leased telephone lines) -15 dB |
Receiving level | 0 … -43 dB |
Adjustable terminating resistor | |
| 600 ohms |
| 150 ohms |
| > 6 kOhms |
Clear to send | |
| after 7 ms |
| after 4 ms |
| after 0.5 ms |
Minimum/maximum scanning frequency | |
| 1300 Hz/2100 Hz |
| 2400 Hz/3300 Hz |
| 20800 Hz/33600 Hz |
Asynchronous character format | 10 or 11 bit |
Floating opto-relay output | |
| 60 V AC/DC |
- Max. perm. continuous current
| 400 mA |
| 3 ohms |
Impulse strength U1.2/50 acc. to DIN VDE 0804 between power supply circuit and | |
- Power supply circuit and FSK trunk line circuits
| 2.5 kV |
- Power supply circuit and opto-relay output
| 2.5 kV |
Compatible with SINAUT modems | |
| at 1200 bit/s |
| at 1200, 2400 and 19200 bit/s |
Approvals | EU approval CE 0682 X |