|
| | | | | |
Machine type | Self-starting permanent magnet excited
synchronous motor |
|---|
Magnet material | Rare-earth/ferrite magnet material | Insulation of the stator winding in accordance with EN60034-1 (IEC60034-1) | Temperature class F for a winding temperature of up to 105K at an ambient temperature of 40C | Operating voltage | Unrestricted operation on the mains or frequency converter according to rating plate | Standards and regulations | The motors comply with the appropriate standards and regulations, especially IEC60034 | Type of construction | In accordance with EN60034-7 (IEC60034-7), see types of construction | Terminal box arrangement (view onto DE) | Top | Terminal box connection type | Terminals in the terminal box for motor connection and PTC thermistor | Degree of protection in accordance with EN60034-5 (IEC60034-5) | IP54 for 2-pole motors
IP55 for 4-pole and 6-pole motors | Permissible ambient temperature | -20C to +40C | Cooling | Self-cooling | Temperature monitoring | Motor protection through PTC thermistor with 3built-in temperature sensors for shutdown | Paint finish | RAL7030, stone gray | Shaft end on the drive end in accordance with DIN748-3 (IEC60072-1) | Shaft end on the drive end with featherkey and featherkey way (half-key balancing) | Radial eccentricity, concentricity, and axial eccentricity in accordance with DIN42955 (IEC60072-1) | ToleranceN (normal) | Vibration severity in accordance with EN60034-14 (IEC60034-14) | GradeN (normal) | Options | - Vibration severity gradeR or S
- Reduced radial eccentricity gradeR
- Cast iron enclosure
- Location bearing DE or NDE
- Radial shaft sealing ring for gear attachment
- Metal fan
- Textile fan cover
- D-end bearings for increased cantilever forces
- Regreasing device
- Forced ventilation
- Terminal box located on left or right
- Modular built-on brake
- Gear attachment
- Connected modular frequency converter with or without gear
|
Structure of order number………1 F U 8 0 8 3 4 T A 3 1 Z | |
|---|
Position 1 2 3 4 5 6 7 - 8 9 10 11 12 | | Position: assignment | | 1st to 4th position | SIEMOSYN1FU8 motor | 5th and 6th position | Motor frame size, coded from 71M to 160L | 7th position | Length | 8th position (number) | Number of poles | 9th position | Ventilation | | T = self-cooled | | W = non ventilated | 10th position | Power range | | A = power range7 | | B = power range5 C = special application D = power range7 for frame sizes 132 and 160 E = power range5 for frame sizes 132 and 160 | 11th position | Voltage characteristic number/winding design
1 = 80V/50Hz
2 = 100V/50Hz
3 = 125V/50Hz
6 = 200V/50Hz
8 = 400V/50Hz | 12th position | Type of construction | Special versions: | | - Z | Special versions
only in conjunction with order code and plaintext where applicable |
Order exampleThree-phase motor IP55, speed range 600 to 4800min-1 M = constant = 5Nm in the speed range Type of construction IMB5 Special version: - PTC thermistor for warning and shutdown
- Radial shaft sealing ring for gear installation
Order no. according to selection table | 1FU8083-4TA3❑ (A11, standard) |
|---|
Type of construction IMB5 | 1 | Special version | -Z | PTC thermistor for warning and shutdown | A12 | Radial shaft sealing ring DE | K17 | Specify when ordering | 1FU8083-4TA31-Z
A12+K17 |
1FU8motors, 2-pole, 50Hz/3000min-1 M = constant for 20 to 250Hz/1200 to 15000min-1 M=constant for 20Hz to fmax | Values at 50Hz | Values at max. frequency | | | | |
|---|
Rated load torque | Rated power | Rated current | Inrush current | Rated power | Rated current | Inrush current | Frame size | Order no. | Max.
external moment of inertia | Weight for type of construction IMB5 | MN | PN | IN | I1 | PN | IN | I1 | | | Jext | | Nm | kW | A | A | kW | A | A | | | kgm2 | approx. kg | max. frequency 50Hz at UN = 400V/50Hz, max. speed 3000min-1 | 1.3 | 0.41 | 2.0 | 7.3 | - | - | - | 80 | 1FU8080 - 2TA8❑ | 0.023 | 9 | 2.2 | 0.7 | 2.9 | 11.8 | - | - | - | 80 | 1FU8083 - 2TA8❑ | 0.035 | 11 | 2.9 | 0.9 | 3.8 | 17.5 | - | - | - | 80 | 1FU8086 - 2TA8❑ | 0.045 | 12 | 7.3 | 2.3 | 6.8 | 43 | - | - | - | 112 | 1FU8113 - 2TA8❑ | 0.3 | 29 | max. frequency 100Hz at UN = 200V/50Hz, max. speed 6000min-1 | 1.3 | 0.41 | 4.1 | 14.6 | 0.82 | 4.2 | 21.7 | 80 | 1FU8080 - 2TA6❑ | 0.023 | 9 | 2.2 | 0.7 | 5.8 | 23.5 | 1.4 | 6.0 | 34.6 | 80 | 1FU8083 - 2TA6❑ | 0.035 | 11 | 2.9 | 0.9 | 7.2 | 33 | 1.8 | 7.5 | 48 | 80 | 1FU8086 - 2TA6❑ | 0.045 | 12 | 7.3 | 2.3 | 13.5 | 85 | 4.6 | 14.1 | 130 | 112 | 1FU8113 - 2TA6❑ | 0.25 | 29 | max. frequency 160Hz at UN = 125V/50Hz, max. speed 9600min-1 | 1.3 | 0.41 | 5.5 | 18.8 | 1.31 | 5.8 | 33 | 80 | 1FU8080 - 2TA3❑ | 0.023 | 12 | 2.2 | 0.7 | 8.5 | 30.6 | 2.24 | 9.1 | 52.4 | 80 | 1FU8083 - 2TA3❑ | 0.035 | 14 | 2.9 | 0.9 | 13 | 58 | 2.92 | 13.5 | 100 | 80 | 1FU8086 - 2TA3❑ | 0.045 | 15 | 7.3 | 2.3 | 22 | 140 | 7.3 | 24.5 | 240 | 112 | 1FU8113 - 2TA3❑ | 0.2 | 35 | max. frequency 200Hz at UN = 100V/50Hz, max. speed 12000min-1 | 1.3 | 0.41 | 7.9 | 29.2 | 1.63 | 9.0 | 55.3 | 80 | 1FU8080 - 2TA2❑ | 0.02 | 12 | 2.2 | 0.7 | 10.2 | 40.5 | 2.8 | 11.2 | 74 | 80 | 1FU8083 - 2TA2❑ | 0.03 | 14 | 2.7 | 0.85 | 14.2 | 66.3 | 3.5 | 15.2 | 121 | 80 | 1FU8086 - 2TA2❑ | 0.04 | 15 | 6.5 | 2,04 | 21 | 130 | 8.2 | 22 | 225 | 112 | 1FU8113 - 2TA2❑ | 0.2 | 35 | max. frequency 250Hz at UN = 80V/50Hz, max. speed 15000min-1 | 1.3 | 0.41 | 9.0 | 33.6 | 2.04 | 11 | 66.6 | 80 | 1FU8080 - 2TA1❑ | 0.017 | 12 | 2.2 | 0.7 | 13 | 44 | 3.46 | 14 | 83.5 | 80 | 1FU8083 - 2TA1❑ | 0.025 | 14 | 2.4 | 0.75 | 14.5 | 83 | 3.8 | 16.7 | 140 | 80 | 1FU8086 - 2TA1❑ | 0.033 | 15 |
When ordering options, an encrypted order code must additionally be specified for each design desired (plaintext where applicable). Order codes must not be repeated in plaintext. Order No.: 1FU8❑❑❑ - ❑T❑❑❑ - Z Order code(s) ❑❑❑ +❑❑❑ +❑❑❑ 1FU8motors, 4-pole, 50Hz/1500min-1 M = constant for 20 to 200Hz/600 to 6000min-1 M = constant for
20Hz to fmax | Values at 50 Hz | Values at max. frequency | | | | |
|---|
Rated load torque | Rated power | Rated current | Inrush current | Rated power | Rated current | Inrush current | Frame size | Order no. | Max.
external moment of inertia | Weight for type of construction IMB5 | MN | PN | IN | I1 | PN | IN | I1 | | | Jext | | Nm | kW | A | A | kW | A | A | | | kgm2 | approx. kg | max. frequency 50Hz at UN = 400V/50Hz, max. speed 1500min-1 | 2 | 0.31 | 0.7 | 2.4 | - | - | - | 71 | 1FU8073 - 4TA8❑ | 0.006 | 6 | 2.6 | 0.41 | 0.9 | 3.2 | - | - | - | 71 | 1FU8076 - 4TA8❑ | 0.008 | 7 | 3.5 | 0.55 | 1.2 | 3.9 | - | - | - | 80 | 1FU8080 - 4TA8❑ | 0.007 | 9 | 5 | 0.79 | 1.7 | 5.7 | - | - | - | 80 | 1FU8083 - 4TA8❑ | 0.01 | 10 | 7 | 1.1 | 2.3 | 9.2 | - | - | - | 80 | 1FU8086 - 4TA8❑ | 0.013 | 12 | 8.5 | 1.33 | 3.1 | 14.3 | - | - | - | 90 | 1FU8096 - 4TA8❑ | 0.07 | 16 | 9.7 | 1.52 | 3.2 | 15.8 | - | - | - | 90 | 1FU8098 - 4TA8❑ | 0.08 | 18 | 18 | 2.83 | 6.7 | 33.7 | - | - | - | 112 | 1FU8113 - 4TA8❑ | 0.15 | 31 | max. frequency 100Hz at UN = 200V/50Hz, max. speed 3000min-1 | 2 | 0.31 | 1.4 | 4.8 | 0.62 | 1.5 | 7.7 | 71 | 1FU8073 - 4TA6❑ | 0.012 | 6 | 2.6 | 0.41 | 1.7 | 6.3 | 0.82 | 1.8 | 9.9 | 71 | 1FU8076 - 4TA6❑ | 0.015 | 7 | 3.5 | 0.55 | 2.4 | 7.8 | 1.1 | 2.4 | 13 | 80 | 1FU8080 - 4TA6❑ | 0.015 | 9 | 5 | 0.79 | 3.4 | 11.4 | 1.57 | 3.3 | 19 | 80 | 1FU8083 - 4TA6❑ | 0.025 | 10 | 7 | 1.1 | 4.5 | 18.4 | 2.2 | 4.5 | 30.3 | 80 | 1FU8086 - 4TA6❑ | 0.03 | 12 | 8.5 | 1.33 | 6.1 | 28.5 | 2.67 | 6.2 | 42.9 | 90 | 1FU8096 - 4TA6❑ | 0.13 | 16 | 9.7 | 1.52 | 6.4 | 31.6 | 3.05 | 6.4 | 45.8 | 90 | 1FU8098 - 4TA6❑ | 0.15 | 18 | 18 | 2.83 | 13.1 | 66.8 | 5.65 | 13.4 | 95.2 | 112 | 1FU8113 - 4TA6❑ | 0.4 | 31 | max. frequency 160Hz at UN = 125V/50Hz, max. speed 4800min-1 | 2 | 0.31 | 2.2 | 8.2 | 1.0 | 2.5 | 17 | 71 | 1FU8073 - 4TA3❑ | 0.012 | 6 | 2.6 | 0.41 | 2.7 | 10.0 | 1.31 | 2.9 | 19.7 | 71 | 1FU8076 - 4TA3❑ | 0.015 | 7 | 3.5 | 0.55 | 3.8 | 12.2 | 1.76 | 3.8 | 26.5 | 80 | 1FU8080 - 4TA3❑ | 0.015 | 9 | 5 | 0.79 | 5.3 | 19.3 | 2.51 | 5.3 | 42.3 | 80 | 1FU8083 - 4TA3❑ | 0.025 | 10 | 7 | 1.1 | 7.2 | 29.4 | 3.52 | 7.2 | 63.8 | 80 | 1FU8086 - 4TA3❑ | 0.03 | 12 | 8.5 | 1.33 | 9.7 | 50 | 4.27 | 10.0 | 93.3 | 90 | 1FU8096 - 4TA3❑ | 0.15 | 16 | 9.7 | 1.52 | 10.3 | 52.3 | 4.88 | 10.3 | 90.5 | 90 | 1FU8098 - 4TA3❑ | 0.18 | 18 | 18 | 2.83 | 22.4 | 117 | 9.05 | 23.5 | 211 | 112 | 1FU8113 - 4TA3❑ | 0.4 | 31 | max. frequency 200Hz at UN = 100V/50Hz, max. speed 6000min-1 | 2 | 0.31 | 2.7 | 9.5 | 1.26 | 3.0 | 21.4 | 71 | 1FU8073 - 4TA2❑ | 0.012 | 6 | 2.6 | 0.41 | 3.5 | 12.7 | 1.63 | 3.7 | 27.7 | 71 | 1FU8076 - 4TA2❑ | 0.015 | 7 | 3.5 | 0.55 | 4.8 | 15.6 | 2.2 | 4.9 | 37.7 | 80 | 1FU8080 - 4TA2❑ | 0.015 | 9 | 5 | 0.79 | 6.7 | 25 | 3.14 | 6.7 | 61.5 | 80 | 1FU8083 - 4TA2❑ | 0.025 | 10 | 7 | 1.1 | 9.0 | 36.8 | 4.4 | 9.0 | 88.7 | 80 | 1FU8086 - 4TA2❑ | 0.03 | 12 | 8.5 | 1.33 | 12.1 | 57 | 5.34 | 12.9 | 113 | 90 | 1FU8096 - 4TA2❑ | 0.15 | 16 | 9.7 | 1.52 | 12.7 | 63.3 | 6.1 | 12.7 | 115 | 90 | 1FU8098 - 4TA2❑ | 0.18 | 18 | 18 | 2.83 | 26.2 | 134 | 11.3 | 27.3 | 251 | 112 | 1FU8113 - 4TA2❑ | 0.4 | 31 |
When ordering options, an encrypted order code must additionally be specified for each design desired (plaintext where applicable). Order codes must not be repeated in plaintext. Order No.: 1FU8 ❑❑❑ - ❑T❑❑❑ - Z Order code(s) ❑❑❑ +❑❑❑ +❑❑❑ 1FU8motors, 4-pole, 50Hz/1500min-1 M = constant for 13.3 to 200Hz/400 to 6000min-1 M = constant for 13.3Hz to fmax | Values at 50Hz | Values at max. frequency | | | | |
|---|
Rated load torque | Rated power | Rated current | Inrush current | Rated power | Rated current | Inrush current | Frame size | Order no. | Max. external moment of inertia | Weight for type of construction IMB5 | MN | PN | IN | I1 | PN | IN | I1 | | | Jext | | Nm | kW | A | A | kW | A | A | | | kgm2 | approx. kg | max. frequency 50Hz at UN = 400V/50Hz, max. speed 1500min-1 | 2.5 | 0.38 | 1.0 | 3.9 | - | - | - | 80 | 1FU8080 - 4TA8❑ | 0.005 | 9 | 5.2 | 0.82 | 1.7 | 9.2 | - | - | - | 80 | 1FU8086 - 4TA8❑ | 0.01 | 12 | 8 | 1.26 | 2.7 | 15.8 | - | - | - | 90 | 1FU8098 - 4TA8❑ | 0.06 | 18 | 16 | 2.51 | 6.0 | 33.7 | - | - | - | 112 | 1FU8113 - 4TA8❑ | 0.11 | 31 | max. frequency 100Hz at UN = 200V/50Hz, max. speed 3000min-1 | 2.5 | 0.38 | 2.0 | 7.8 | 0.79 | 2.0 | 13 | 80 | 1FU8080 - 4TA6❑ | 0.011 | 9 | 5.2 | 0.82 | 3.4 | 18.4 | 1.63 | 3.4 | 30.3 | 80 | 1FU8086 - 4TA6❑ | 0.022 | 12 | 8 | 1.26 | 5.5 | 31.6 | 2.51 | 5.5 | 45.8 | 90 | 1FU8098 - 4TA6❑ | 0.11 | 18 | 16 | 2.51 | 12.0 | 66.8 | 5.03 | 12.3 | 95.2 | 112 | 1FU8113 - 4TA6❑ | 0.33 | 31 | max. frequency 160Hz at UN = 125V/50Hz, max. speed 4800min-1 | 2.5 | 0.38 | 2.8 | 12.2 | 1.26 | 2.9 | 26.5 | 80 | 1FU8080 - 4TA3❑ | 0.011 | 9 | 5.2 | 0.82 | 5.3 | 29.4 | 2.61 | 5.3 | 63.8 | 80 | 1FU8086 - 4TA3❑ | 0.022 | 12 | 8 | 1.26 | 8.8 | 52.3 | 4.02 | 9.0 | 90.5 | 90 | 1FU8098 - 4TA3❑ | 0.13 | 18 | 16 | 2.51 | 20.7 | 117 | 8.04 | 21.8 | 211 | 112 | 1FU8113 - 4TA3❑ | 0.33 | 31 | max. frequency 200Hz at UN = 100V/50Hz, max. speed 6000min-1 | 2.5 | 0.38 | 4.1 | 15.6 | 1.57 | 4.1 | 37.7 | 80 | 1FU8080 - 4TA2❑ | 0.011 | 9 | 5.2 | 0.82 | 6.7 | 36.8 | 3.27 | 6.8 | 88.7 | 80 | 1FU8086 - 4TA2❑ | 0.022 | 12 | 8 | 1.26 | 10.9 | 63.3 | 5.03 | 11.1 | 115 | 90 | 1FU8098 - 4TA2❑ | 0.13 | 18 | 16 | 2.51 | 23.9 | 134 | 10.1 | 25.1 | 251 | 112 | 1FU8113 - 4TA2❑ | 0.33 | 31 |
When ordering options, an encrypted order code must additionally be specified for each design desired (plaintext where applicable). Order codes must not be repeated in plaintext. Order No.: 1FU8❑❑❑ - ❑T❑❑❑ - Z Order code(s) ❑❑❑ +❑❑❑ +❑❑❑ 1FU8motors, 6-pole, 50Hz/1000min-1 M = constant for 20 to 200Hz/400 to 4000min-1 M = constant
for
20Hz to fmax | Values at 50Hz | Values at max. frequency | | | | |
|---|
Rated load torque | Rated power | Rated current | Inrush current | Rated power | Rated current | Inrush current | Frame size | Order no. | Max. external moment of inertia | Weight for type of construction IMB5 | MN | PN | IN | I1 | PN | IN | I1 | | | Jext | | Nm | kW | A | A | kW | A | A | | | kgm2 | approx. kg | max. frequency 50Hz at UN = 400V/50Hz, max. speed 1000min-1 | 34 | 3.6 | 8.1 | 36 | - | - | - | 132 | 1FU8134 - 6TD8❑ | 1.3 | 58 | 59.6 | 6.24 | 13.5 | 73 | - | - | - | 160 | 1FU8167 - 6TD8❑ | 2 | 109 | max. frequency 100Hz at UN = 200V/50Hz, max. speed 2000min-1 | 34 | 3.6 | 16.2 | 70 | 7.2 | 17.1 | 93 | 132 | 1FU8134 - 6TD6❑ | 1.3 | 58 | 59.6 | 6.24 | 26.8 | 146 | 12.48 | 28 | 188 | 160 | 1FU8167 - 6TD6❑ | 2 | 109 | max. frequency 160Hz at UN = 125V/50Hz, max. speed 3200min-1 | 28.9 | 3 | 28 | 111 | 9.7 | 31.2 | 160 | 132 | 1FU8134 - 6TD3❑ | 1.3 | 58 | 54.6 | 5.7 | 52 | 231 | 18.3 | 58 | 333 | 160 | 1FU8167 - 6TD3❑ | 2 | 109 | max. frequency 200Hz at UN = 100V/50Hz, max. speed 4000min-1 | 28.9 | 3 | 35.1 | 140 | 12.1 | 42 | 203 | 132 | 1FU8134 - 6TD2❑ | 1.3 | 58 | 54.6 | 5.7 | 65.5 | 290 | 22.9 | 78 | 437 | 160 | 1FU8167 - 6TD2❑ | 1.5 | 109 |
When ordering options, an encrypted order code must additionally be specified for each design desired (plaintext where applicable). Order codes must not be repeated in plaintext. Order No.: 1FU8❑❑❑ - ❑T❑❑❑ - Z Order code(s) ❑❑❑ +❑❑❑ +❑❑❑ Order no. supplement, 12thposition of the order no., type of construction12th Order no. position, type of construction in accordance with DINEN60034-7
Size 71M to 160L
| | Code
12th position | Order code |
|---|
IMB3 |  | 0 | - | IMB6/IM1051,
IMB7/IM1061,
IMB8/IM1071 |  |  | | 0 | - | IMV5/IM1011
without protective cover | | 0
9 | -
M1D | IMV6/IM1031 |  | 0
9 | -
M1E | IMV5/IM1011
with protective cover |  | 9 1) | M1F | Flange | IMB5/IM3001 |  | 1 | - | IMV5/IM3011
without protective cover |  | 1
8 | - | IMV1/IM3011
with protective cover |  | 4 1) | - | IMV3/IM3031 | | 1
9 | -
M1G | IMB35/IM2001 | | 6 | - | Standard flange | IMB14/IM3601,
IMV19/IM3631,
IMV18/IM3611
without protective cover | |  |  | 2 | - | IMV18/IM3611
with protective cover |  | 9 1) | M2A | IMB34/IM2101 |  | 7 | - | Special flange | IMB14/IM3601,
IMV19/IM3631,
IMV18/IM3611
without protective cover | | | | 3 | - | IMV18/IM3611
with protective cover | | 9 1) | M2B | IMB34/IM2101 | | 9 | M2C |
The flanges are assigned to the frame sizes in DINEN50347 as FF with through-holes.
A flanges in accordance with DIN42948 continue to be valid. The standard flanges are assigned to the frame sizes in DINEN50347 as FT with threaded holes.
C flanges in accordance with DIN42948 continue to be valid. The special flange was assigned as a large flange in the previous DIN42677. The dimensions of the following types of construction are identical:
IMB3, IMB6, IMB7, IMB8, IMV5 and IMV6
IMB5, IMV1 and IMV3
IMB14, IMV18 and IMV19 The motors in the standard power range are available in the standard types of construction IMB3, IMB5 or IMB14, and can be operated in mounting positions IMB6, IMB7, IMB8, IMV5, IMV6, IMV1, IMV3 (up to frame size 160L) or IMV18 and IMV19. Eyebolts are available for transport and installation in a horizontal position. In conjunction with the eyebolts, for the purpose of stabilizing the position when the motor is arranged vertically, additional lifting straps (DINEN1492-1) and/or clamping bands (DINEN12195-2) must be used. If mounting position IMV1 is ordered, eyebolts are supplied for vertical mounting. For this reason, they are normally designated only with the basic type of construction on the rating plate. In the case of all types of construction with shaft end down, the version "with protective cover" is recommended. 1) Second shaft end K16 not possible.
|
|
