CP 342-5 FO . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на CP 342-5 FO

| | | | | | | |

Article number		6GK7342-5DF00-0XE0
Product type designation		CP 342-5 FO
Transmission rate
Transfer rate
в—Џ at the 1st interface acc. to PROFIBUS		9.6 kbit/s ... 12 Mbit/s
Interfaces
Number of interfaces acc. to Industrial Ethernet		0
Number of electrical connections
в—Џ for power supply		1
Number of optical interfaces at the 1st interface acc. to PROFIBUS		2
Design of the optical interface at the 1st interface acc. to PROFIBUS		Duplex socket
Type of electrical connection
в—Џ for power supply		4-pole terminal block
Supply voltage, current consumption, power loss
Type of voltage of the supply voltage		DC
Supply voltage 1 from backplane bus		5 V
Supply voltage		24 V
Supply voltage external		24 V
Supply voltage external at DC Rated value		24 V
Relative positive tolerance at DC at 24 V		20 %
Relative negative tolerance at DC at 24 V		15 %
Consumed current
в—Џ from backplane bus at DC at 5 V typical		0.15 A
в—Џ from external supply voltage at DC at 24 V typical		0.25 A
Power loss [W]		6 W
Permitted ambient conditions
Ambient temperature
в—Џ during operation		0 ... 60 °C
в—Џ during storage		-40 ... +70 °C
в—Џ during transport		-40 ... +70 °C
Relative humidity at 25 °C without condensation during operation maximum		95 %
Protection class IP		IP20
Design, dimensions and weight
Module format		Compact module
Width		40 mm
Height		125 mm
Depth		120 mm
Net weight		0.3 kg
Mounting type
в—Џ S7-300 rail mounting		Yes
Product properties, functions, components general
Number of units
в—Џ per CPU maximum		4
Wire length
в—Џ for PCF FOC maximum		300 m
в—Џ for POF FOC maximum		50 m
Performance data open communication
Number of possible connections for open communication by means of SEND/RECEIVE blocks maximum		16
Amount of data
в—Џ as user data per connection for open communication by means of SEND/RECEIVE blocks maximum		240 byte
Performance data PROFIBUS DP
Service as DP master
в—Џ DPV0		Yes
Number of DP slaves on DP master usable		124
Amount of data
в—Џ of the address area of the inputs as DP master total		2 160 byte
в—Џ of the address area of the outputs as DP master total		2 160 byte
в—Џ of the address area of the inputs per DP slave		244 byte
в—Џ of the address area of the outputs per DP slave		244 byte
в—Џ of the address area of the diagnostic data per DP slave		240 byte
Service as DP slave
в—Џ DPV0		Yes
Amount of data
в—Џ of the address area of the inputs as DP slave total		240 byte
в—Џ of the address area of the outputs as DP slave total		240 byte
Performance data S7 communication
Number of possible connections for S7 communication
в—Џ maximum		16
Performance data multi-protocol mode
Number of active connections with multi-protocol mode
в—Џ without DP maximum		32
в—Џ with DP maximum		28
Performance data telecontrol
Protocol is supported
в—Џ TCP/IP		No
Configuration software
в—Џ required		STEP 7 V5.1 SP2 or higher / STEP 7 Professional V12 (TIA Portal) or higher