Analog modules with HART . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на Analog modules with HART

| | | |

Article number	6ES7331-7TF01-0AB0	6ES7331-7TB10-0AB0
	SM331, 8AI, 0/4-20MA HART	SIMATIC DP, HART ANALOG INPUT M
Supply voltage
Load voltage L+
в—Џ Rated value (DC)	24 V	24 V
в—Џ Reverse polarity protection	Yes	Yes
Input current
from load voltage L+ (without load), max.	20 mA	180 mA
from backplane bus 5 V DC, max.	120 mA	100 mA
Output voltage
Power supply to the transmitters
в—Џ present	Yes	Yes
в—Џ Rated value (DC)	24 V	15 V; at 22 mA
в—Џ short-circuit proof	Yes	Yes; approx. 30 mA
в—Џ No-load voltage (DC)		29.6 V
Power loss
Power loss, typ.	1.5 W	4.5 W
Analog inputs
Number of analog inputs	8	2
permissible input current for current input (destruction limit), max.	40 mA	40 mA
Input ranges
в—Џ Voltage	No
в—Џ Current	Yes	Yes
в—Џ Thermocouple	No
в—Џ Resistance thermometer	No
в—Џ Resistance	No
Input ranges (rated values), currents
в—Џ 0 to 20 mA	Yes	Yes
в—Џ Input resistance (0 to 20 mA)	140 в„¦	50 в„¦
в—Џ Input resistance (-20 mA to +20 mA)	140 в„¦
в—Џ 4 mA to 20 mA		Yes
в—Џ Input resistance (4 mA to 20 mA)	140 в„¦	50 в„¦
Cable length
в—Џ shielded, max.	800 m	400 m
Analog value generation for the inputs
Measurement principle	Sigma Delta	Sigma Delta
Integration and conversion time/resolution per channel
в—Џ Resolution with overrange (bit including sign), max.	16 bit	16 bit; 10 bit to 15 bit + sign
в—Џ Integration time, parameterizable	Yes	Yes
в—Џ Integration time (ms)	20 ms at 50 Hz; 16.6 ms at 60 Hz; 100 ms at 100 Hz	2,5 / 16,67 / 20 / 100 ms
в—Џ Basic conversion time, including integration time (ms)	55 ms @ 60 Hz, 65 ms @ 50 Hz, 305 ms @ 100 Hz	2.5 / 16.67 / 20 / 100 (1 channel enabled); 7.5 / 50 / 60 / 300 (2 channels enabled)
в—Џ Interference voltage suppression for interference frequency f1 in Hz	10 / 50 / 60 Hz	10 / 50 / 60 / 400 Hz
Encoder
Connection of signal encoders
в—Џ for current measurement as 2-wire transducer	Yes	Yes
в—Џ for current measurement as 4-wire transducer	Yes	Yes
Errors/accuracies
Linearity error (relative to input range), (+/-)	0.01 %	0.01 %
Temperature error (relative to input range), (+/-)	0.001 %/K	0.01 %/K
Crosstalk between the inputs, min.	70 dB	130 dB
Repeat accuracy in steady state at 25 °C (relative to input range), (+/-)	0.1 %	0.05 %
Operational error limit in overall temperature range
в—Џ Current, relative to input range, (+/-)	0.15 %	0.45 %; From 0/4 to 20 mA
Basic error limit (operational limit at 25 °C)
в—Џ Current, relative to input range, (+/-)	0.1 %	0.1 %; From 0/4 to 20 mA
Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency
в—Џ Series mode interference (peak value of interference < rated value of input range), min.	40 dB	60 dB
в—Џ Common mode interference, min.	100 dB	130 dB
Isochronous mode
Isochronous operation (application synchronized up to terminal)	No
Interrupts/diagnostics/status information
Diagnostic functions	Yes	Yes; Parameterizable
Alarms
в—Џ Diagnostic alarm	Yes	Yes; Parameterizable
в—Џ Limit value alarm	Yes	Yes; Parameterizable, channels 0 and 1
Diagnostic messages
в—Џ Diagnostic information readable	Yes	Yes; possible
в—Џ Overrange		Yes; Red LED, signal
в—Џ Wire-break in signal transmitter cable		Yes; Red LED, signal
в—Џ Short-circuit of the signal encoder cable		Yes; Red LED, signal
в—Џ HART communication active		Yes; green LED (H)
Diagnostics indication LED
в—Џ Group error SF (red)	Yes	Yes
в—Џ Channel fault indicator F (red)	Yes	Yes
Ex(i) characteristics
Module for Ex(i) protection		Yes
Maximum values of input circuits (per channel)
в—Џ Co (permissible external capacity), max.		62 nF
в—Џ Io (short-circuit current), max.		96.1 mA
в—Џ Lo (permissible external inductivity), max.		3 mH
в—Џ Po (power of load), max.		511 mW
в—Џ Uo (output no-load voltage), max.		26 V
в—Џ Um (fault voltage), max.		250 V; DC
в—Џ Ta (permissible ambient temperature), max.		60 °C
Potential separation
Potential separation analog inputs
в—Џ between the channels	No	Yes
в—Џ between the channels and backplane bus	Yes	Yes
Permissible potential difference
between the inputs (UCM)		60 V DC/30 V AC permitted potential difference (Viso) of signals from hazardous areas
Isolation
Isolation tested with	500 V DC
tested with
в—Џ Channels against backplane bus and load voltage L+		2500 V DC
в—Џ Channels among one another		2500 V DC
в—Џ Load voltage L+ against backplane bus		500 V DC
Standards, approvals, certificates
CE mark		Yes
UL approval		Yes
FM approval		Yes
RCM (formerly C-TICK)		Yes
KC approval		Yes
EAC (formerly Gost-R)		Yes
Use in hazardous areas
в—Џ Type of protection acc. to FM		Class I, Division 2, Group A, B, C, D T4; Class I, Zone 2, Group IIC T4
в—Џ Type of protection acc. to KEMA		ATEX II 3 G (2) GD Ex nA [ib Gb] [ib IIIC Db] IIC T4 Gc
в—Џ Test number KEMA		DEKRA 14 ATEX 0052X
Ambient conditions
Ambient temperature during operation
в—Џ min.		0 °C
в—Џ max.		60 °C
Connection method
required front connector	20-pin	1x 20-pin
Dimensions
Width	40 mm	40 mm
Height	125 mm	125 mm
Depth	117 mm	120 mm
Weights
Weight, approx.	205 g	260 g

Article number	6ES7332-8TF01-0AB0	6ES7332-5TB10-0AB0
	SM332, 8AO, 0/4 - 20MA HART	SIMATIC DP, HART ANALOG OUTPUT
Supply voltage
Load voltage L+
в—Џ Rated value (DC)	24 V	24 V
в—Џ Reverse polarity protection	Yes	Yes
Input current
from load voltage L+ (without load), max.	350 mA	150 mA
from backplane bus 5 V DC, max.	110 mA	100 mA
Power loss
Power loss, typ.	6 W	3.5 W
Analog outputs
Number of analog outputs	8	2
Current output, no-load voltage, max.	24 V	19 V
Cycle time (all channels) max.		5 ms
Output ranges, current
в—Џ 0 to 20 mA	Yes	Yes
в—Џ -20 mA to +20 mA	No	No
в—Џ 4 mA to 20 mA	Yes	Yes
Connection of actuators
в—Џ for current output two-wire connection	Yes	Yes
Load impedance (in rated range of output)
в—Џ with current outputs, max.	750 в„¦	650 в„¦
в—Џ with current outputs, inductive load, max.	10 mH	7.5 mH
Destruction limits against externally applied voltages and currents
в—Џ Voltages at the outputs towards MANA	+60/-0.5 V	max. 17 V / -0.5 V
в—Џ Current, max.		60 mA / -1 A
Cable length
в—Џ shielded, max.	800 m	400 m
Analog value generation for the outputs
Integration and conversion time/resolution per channel
в—Џ Resolution with overrange (bit including sign), max.	16 bit	12 bit; + sign
в—Џ Conversion time (per channel)		40 ms
Settling time
в—Џ for resistive load	0.1 ms	2.5 ms
в—Џ for capacitive load		4 ms
в—Џ for inductive load	0.5 ms	2.5 ms
Errors/accuracies
Output ripple (relative to output range, bandwidth 0 to 50 kHz), (+/-)	0.02 %	0.02 %
Linearity error (relative to output range), (+/-)	0.01 %	0.03 %
Temperature error (relative to output range), (+/-)	0.002 %/K	0.01 %/K
Crosstalk between the outputs, min.	70 dB	130 dB
Repeat accuracy in steady state at 25 °C (relative to output range), (+/-)	0.05 %	0.005 %
Operational error limit in overall temperature range
в—Џ Current, relative to output range, (+/-)	0.2 %	0.55 %
Basic error limit (operational limit at 25 °C)
в—Џ Current, relative to output range, (+/-)	0.1 %	0.15 %
Isochronous mode
Isochronous operation (application synchronized up to terminal)	No
Interrupts/diagnostics/status information
Diagnostic functions	Yes	Yes; Parameterizable
Substitute values connectable	Yes	Yes; Parameterizable
Alarms
в—Џ Diagnostic alarm	Yes	Yes; Parameterizable
Diagnostic messages
в—Џ Diagnostic information readable	Yes	Yes; possible
в—Џ Overrange		Yes
в—Џ Wire-break		Yes; as of output value > 0.5 mA
в—Џ HART communication active		Yes; green LED (H)
Diagnostics indication LED
в—Џ Group error SF (red)	Yes	Yes; Red LED
в—Џ Channel fault indicator F (red)		Yes; per channel
Ex(i) characteristics
Module for Ex(i) protection		Yes
Maximum values of output circuits (per channel)
в—Џ Co (permissible external capacity), max.		230 nF
в—Џ Io (short-circuit current), max.		66 mA
в—Џ Lo (permissible external inductivity), max.		7.5 mH
в—Џ Po (power of load), max.		506 mW
в—Џ Uo (output no-load voltage), max.		19 V
в—Џ Um (fault voltage), max.		60 V; DC
в—Џ Ta (permissible ambient temperature), max.		60 °C
Potential separation
Potential separation analog outputs
в—Џ between the channels	No	Yes
в—Џ between the channels and backplane bus	Yes	Yes
в—Џ Between the channels and load voltage L+	Yes	Yes
Permissible potential difference
between the outputs (UCM)		60 V DC/30 V AC permitted potential difference (Viso) of signals from hazardous areas
Isolation
Isolation tested with	500 V DC
tested with
в—Џ Channels against backplane bus and load voltage L+		2500 V DC
в—Џ Channels among one another		2500 V DC
в—Џ Load voltage L+ against backplane bus		500 V DC
Standards, approvals, certificates
FM approval		Yes
Use in hazardous areas
в—Џ Type of protection acc. to FM		Class I, Division 2, Group A, B, C, D T4; Class I, Zone 2, Group IIC T4
в—Џ Type of protection acc. to KEMA		ATEX II 3 G (2) GD Ex nA [ib Gb] [ib IIIC Db] IIC T4 Gc
в—Џ Test number KEMA		DEKRA 14 ATEX 0053X
Connection method
required front connector	20-pin	20-pin
Dimensions
Width	40 mm	40 mm
Height	125 mm	125 mm
Depth	117 mm	120 mm
Weights
Weight, approx.	220 g	290 g