Customized inscriptions

The labels can be inscribed with text and symbols not listed in the ordering data.

The following letter heights are used as standard for text inscriptions:

• Label size 12.5 mm Г— 27 mm: 3 lines with letter height 4 mm (1-line), 3.5 mm (2-line) or 2.5 mm (3-line)
• Label size 27 mm Г— 27 mm: 5 lines with letter height 4 mm (1- to 5-line)
• Label size 17.5 mm Г— 28 mm: 3 lines with letter height 4 mm (1- to 2-line) or 3 mm (3-line)

Up to 11 characters per line are possible. The typeface used is Arial. Other letter heights and typefaces are possible, but must be specified when ordering.

Examples for customized inscription

Two-line inscription in upper/lower case lettering (k0Y)

Single-line inscription in upper case lettering (K1Y)

Three-line inscription in lower case letters (K2Y)

Symbol number 5011 according to IEC 60417 (K3Y)

Any symbol according to order form supplement (K9Y)

Ordering notes

Append the following order codes to the Article No.:

• Text line(s) in upper/lower case, upper case only for beginning of line (e.g. "Lift/Off"): K0Y
• Text line(s) in upper case (e.g. "LIFT"): K1Y
• Text line(s) in lower case (e.g. "lift/off/lower"): K2Y
• Text line(s) in upper/lower case, all words begin with upper case letters (e.g. "On   Off"): K5Y
• Symbol with number according to ISO 7000 or IEC 60417: K3Y
• Any inscription or symbol according to order form supplement: K9Y

When ordering, specify the required inscription in plain text in addition to the article number and order code. In the case of special inscriptions with words in languages other than German, give the exact spelling and specify the language.

In the case of multi-line inscriptions, the text must be assigned to the respective line, e.g."Z1 = Lift, Z2 =Lower". For long words you can also specify the end-of-line division (see ordering example 1).

Symbols can also be ordered with numbers according to ISO 7000 or IEC 60417 (see ordering example 2 and 3).

For special symbols (order code K9Y), a CAD drawing in BMP, GIF, JEPG, PDF, PNG or TIFF format must be submitted. For special inscriptions (order code K9Y): document in DOC or XLS format.

E-mail to: sirius-attach.aud@siemens.com

Ordering example 1

A label with 2 lines of text is required:

3SB39 02–1XZ
K1Y
Z1 = LIFT
Z2 = LOWER

Ordering example 2

A label inscribed with symbol No. 5011 according to IEC 60417 is required:

3SB39 02–1XZ
K3Y
Z = 5011 IEC

Ordering example 3

A label inscribed with symbol No. 1118 according to ISO 7000 is required:

3SB39 02–1XZ
K3Y
Z = 1118 ISO