SM 323/SM 327 digital input/output modules . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SM 323/SM 327 digital input/output modules

| | | | | | | |

Article number	6ES7323-1BH01-0AA0	6ES7323-1BL00-0AA0	6ES7327-1BH00-0AB0
	SM323, 8DI/8DO, DC24V, 0,5A	SM323, 16DI/DO, DC24V, 0,5A	SIMATIC S7-300, DIGITAL MODULE
Supply voltage
Load voltage L+
в—Џ Rated value (DC)	24 V	24 V	24 V
в—Џ permissible range, lower limit (DC)	20.4 V	20.4 V	20.4 V
в—Џ permissible range, upper limit (DC)	28.8 V	28.8 V	28.8 V
Input current
from load voltage L+ (without load), max.	40 mA	80 mA	20 mA
from backplane bus 5 V DC, max.	40 mA	80 mA	60 mA
Power loss
Power loss, typ.	3.5 W	6.5 W	3 W
Digital inputs
Number of digital inputs	8	16	8; 8 hard-wired, 8 others individually parameterizable
Input characteristic curve in accordance with IEC 61131, type 1	Yes	Yes	Yes
Number of simultaneously controllable inputs
horizontal installation
вЂ” up to 40 °C, max.		16
вЂ” up to 60 °C, max.	8	8	16
vertical installation
вЂ” up to 40 °C, max.	8	16	16
Input voltage
в—Џ Type of input voltage	DC	DC	DC
в—Џ Rated value (DC)	24 V	24 V	24 V
в—Џ for signal "0"	-30 to +5V	-30 to +5V	-30 to +5V
в—Џ for signal "1"	13 to 30V	13 to 30V	+15 to +30V
Input current
в—Џ for signal "1", typ.	7 mA	7 mA	6 mA
Input delay (for rated value of input voltage)
for standard inputs
вЂ” at "0" to "1", min.	1.2 ms	1.2 ms	1.2 ms
вЂ” at "0" to "1", max.	4.8 ms	4.8 ms	4.8 ms
вЂ” at "1" to "0", min.	1.2 ms	1.2 ms	1.2 ms
вЂ” at "1" to "0", max.	4.8 ms	4.8 ms	4.8 ms
Cable length
в—Џ shielded, max.	1 000 m	1 000 m	1 000 m
в—Џ unshielded, max.	600 m	600 m	600 m
Digital outputs
Number of digital outputs	8	16	8; can also be parameterized individually as DI
Short-circuit protection	Yes	Yes	Yes
в—Џ Response threshold, typ.	1 A	1 A	1 A
Limitation of inductive shutdown voltage to	L+ (-53 V)	L+ (-48 V)	L+ (-54 V)
Controlling a digital input	Yes	Yes	Yes
Switching capacity of the outputs
в—Џ on lamp load, max.	5 W	5 W	5 W
Load resistance range
в—Џ lower limit	48 в„¦	48 в„¦	48 в„¦
в—Џ upper limit	4 kв„¦	4 kв„¦	4 kв„¦
Output voltage
в—Џ for signal "1", min.	L+ (-0.8 V)	L+ (-0.8 V)	L+ (-1.5 V)
Output current
в—Џ for signal "1" rated value	0.5 A	0.5 A	0.5 A
в—Џ for signal "1" permissible range, min.	5 mA	5 mA	5 mA
в—Џ for signal "1" permissible range, max.	0.6 A	0.6 A	0.6 A
в—Џ for signal "1" minimum load current	5 mA	5 mA
в—Џ for signal "0" residual current, max.	0.5 mA	0.5 mA	0.5 mA
Output delay with resistive load
в—Џ "0" to "1", max.	100 µs	100 µs	350 µs
в—Џ "1" to "0", max.	500 µs	500 µs	500 µs
Parallel switching of two outputs
в—Џ for uprating	No	No	No
в—Џ for redundant control of a load	Yes; only outputs of the same group	Yes; only outputs of the same group	Yes; only outputs of the same group
Switching frequency
в—Џ with resistive load, max.	100 Hz	100 Hz	100 Hz
в—Џ with inductive load, max.	0.5 Hz	0.5 Hz	0.5 Hz
в—Џ on lamp load, max.	10 Hz	100 Hz	10 Hz
Total current of the outputs (per group)
horizontal installation
вЂ” up to 40 °C, max.	4 A	4 A	4 A
вЂ” up to 60 °C, max.	4 A	3 A	3 A
vertical installation
вЂ” up to 40 °C, max.	4 A	2 A	2 A
Cable length
в—Џ shielded, max.	1 000 m	1 000 m	1 000 m
в—Џ unshielded, max.	600 m	600 m	600 m
Encoder
Connectable encoders
в—Џ 2-wire sensor	Yes	Yes	Yes
вЂ” permissible quiescent current (2-wire sensor), max.	2 mA	1.5 mA	1.5 mA
Isochronous mode
Isochronous operation (application synchronized up to terminal)	No	No	No
Interrupts/diagnostics/status information
Alarms	No	No	No
Diagnostic functions	No	No	No
Diagnostics indication LED
в—Џ Status indicator digital input (green)	Yes	Yes	Yes
в—Џ Status indicator digital output (green)	Yes	Yes	Yes
Potential separation
Potential separation digital inputs
в—Џ between the channels	Yes	Yes	No
в—Џ between the channels, in groups of	8	16
в—Џ between the channels and backplane bus	Yes; Optocoupler	Yes; Optocoupler	Yes; Optocoupler
Potential separation digital outputs
в—Џ between the channels	Yes	Yes	No
в—Џ between the channels, in groups of	8	8
в—Џ between the channels and backplane bus	Yes; Optocoupler	Yes; Optocoupler	Yes; Optocoupler
Isolation
Isolation tested with	500 V DC	500 V DC	500 V DC
Connection method
required front connector	20-pin	40-pin	20-pin
Dimensions
Width	40 mm	40 mm	40 mm
Height	125 mm	125 mm	125 mm
Depth	120 mm	120 mm	120 mm
Weights
Weight, approx.	220 g	260 g	200 g