SIPLUS SM 1226 fail-safe relay output . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SIPLUS SM 1226 fail-safe relay output

| | | | |

SIPLUS SM 1226 fail-safe relay output

Article number		6AG1226-6RA32-5XB0
		SIPLUS S7-1200 SM 1226 F-DQ 2xRelay
General information
Product type designation		SM 1226 F-DQ 2 x Relay
Supply voltage
Rated value (DC)
? 24 V DC		Yes
Input current
from backplane bus 5 V DC, max.		120 mA
Digital outputs
? from load voltage L+, max.		300 mA
Power loss
Power loss, typ.		10 W
Output voltage
? Rated value (DC)		5 V DC to 30 V DC
? Rated value (AC)		5 V AC to 250 V AC
Output current
? for signal "1" permissible range, max.		5 A maximum per circuit and 10 A maximum of all circuits per module
Relay outputs
? Number of relay outputs		2; 2 circuits per output
Switching capacity of contacts
— with inductive load, max.		0.1 Hz, accordance with IEC 60947-5-1, DC-13; 2 Hz, accordance with IEC 60947-5-1, AC-15
— with resistive load, max.		2 Hz
Cable length
? shielded, max.		200 m
? unshielded, max.		200 m
Diagnostics indication LED
? for status of the outputs		Yes
Standards, approvals, certificates
CE mark		Yes
cULus		Yes
FM approval		No
Highest safety class achievable in safety mode
? SIL acc. to IEC 61508		SIL 3
Ambient conditions
Free fall
? Fall height, max.		0.3 m; five times, in product package
Ambient temperature during operation
? min.		-25 °C; = Tmin
? max.		55 °C; = Tmax
Extended ambient conditions
? relative to ambient temperature-atmospheric pressure-installation altitude		Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)
Relative humidity
— With condensation, tested in accordance with IEC 60068-2-38, max.		100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Resistance
— against biologically active substances / conformity with EN 60721-3-3		Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!
— against chemically active substances / conformity with EN 60721-3-3		Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
— against mechanically active substances / conformity with EN 60721-3-3		Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Mechanics/material
Enclosure material (front)
? Plastic		Yes
Dimensions
Width		70 mm
Height		100 mm
Depth		75 mm
Weights
Weight, approx.		300 g