2-port interface via bus adapter with an RJ45 connection with 10/100 Mbps full/half duplex with autosensing functionality
The CP 1542SP-1 communications processor connects the ET 200SP Distributed Controller to additional Industrial Ethernet networks
Communication services:
Open communication (TCP/IP, UDP, ISO-on-TCP): Multicast with UDP
PG/OP communication: Inter-network with S7 routing
S7 communication (client, server)
S7 routing
IT communication: HTTP communication allows access to the web server of the CPU.
The e-mail client function enables sending of e-mails direct from the user program. IP address assignment via DHCP for IPv4 or via direct entry in the engineering software and via the T_CONFIG function block STEP 7 Professional V14 (TIA Portal) or higher
Diagnostics and network management:
Extensive diagnostic functions of all modules in the ET 200SP system
Integration in network management systems through the support of SNMP V1
Configuration of all functions with STEP 7 Professional V14 (TIA Portal) or higher
Module replacement without programming device: All information can be stored on the memory card of the CPU.
