SIPLUS ET 200SP CM 4XIO-LINK ST T1 RAIL communication module: Serial communication module for connecting up to 4 IO-Link devices in accordance with IO-Link specification V1.0 and V1.1. The IO-Link parameters are configured using the Port Configuration Tool (PCT), version V3.0 and higher.
Approved in accordance with the EN 50155, EN 15121, EN 50124, EN 50125 and EN 45545 railway standards for use in rail traffic
Time-based IO Time-based IO ensures that signals are output with a precisely defined response time. By combining inputs and outputs, for example, passing products can be accurately measured or fluids dosed in precise quantities.
Supported data transfer rates
COM1 (4.8 kbit/s)
COM2 (38.4 kbit/s)
COM3 (230.4 kbit/s)
Expansion limits
Length of cable: Max. 20 m
Max. 32 bytes of input and output data per port
Max. 144 bytes of input data and 128 bytes of output data per module
Supported ET 200SP system functions
Replacement without PG with automatic backup without the engineering tool of the IO Link Device Parameter (V1.1 devices only) and the IO-Link master parameters by means of redundant saving of parameters on the e-coding element
Reparameterization during operation
Identification data I&M
Firmware update
PROFIenergy
Can be plugged into Type A0 BaseUnits (BU) with automatic e-coding
LED indicators
DIAG: Operating state indicator (green/red) of the module
C1..C4: Port status indicator (green) for Port 1, 2, 3 and 4
Q1..Q4: Channel status indicator (green) for Port 1, 2, 3 and 4
F1..F4: Port fault indicator (red) for Port 1, 2, 3 and 4
PWR: Supply voltage indicator (green)
Clear labeling on front of module
Plain text identification of the module type and function class
