All-metal 19" enclosure for flush mounting (4 U) with corrosion-protected surface (blue chromate) and with optional design finish (paint finish 2)) for high electromagnetic compatibility and mechanical ruggedness
Two housing versions (short 356 mm deep and standard 446 mm deep) for enhanced flexibility
Prepared for mounting on telescopic rails
Horizontal and vertical installation is possible. It can be used as an industrial tower PC with the appropriate kit
Lockable front door for authorized access to front swap media, operator controls (power, reset), USB interfaces, front fan and dust filter
Card retainer for PC modules for safe transport (vibration and shock)
Replacement of PC components (e.g. PC cards or hard disks) with a single tool
Front fan and dust filter can be replaced without tools
Dust protection filter by means of overpressure ventilation with bearing seated front fan
Slots for installing drives (standard enclosure version):
Front: 4 x low-profile HDD removable drive bay trays; 1 x ODD (slimline)
Internal: - 3 x 3.5"/2.5" in 5.25"; 2 x 3.5"/ 2.5" (optional)
Slots for installing drives (short enclosure version):
Internal: 2 x 3.5"/2.5"
Design versions
Mainboard (H110 chipset)
Onboard graphics: Intel HD graphics;
530 / 510 integrated into processor
Interfaces
2 x Intel Gigabit Ethernet (RJ45, teaming-capable)
4 x USB 3.0: 2 x at the rear, 2 x at the front
4 x USB 2.0: 4 x at the rear
1 x DisplayPort V1.2, 1 x DVI-D, 2 x PS/2
Audio: Line in, line out, micro
7 spare slots for expansions (all long 2)):
1 x PCIe x16 Gen. 3
1 x PCIe x16 (1 lane) Gen 2
1 x PCIe x8 (1 lane) Gen 2
1 x PCIe x4 (1 lane) Gen 2
1 x PCIe x4 (1 lane) Gen 2
2 x PCI
Mainboard (C236 chipset)
Onboard graphics: Intel HD graphics;
P530 / 530 / 510 integrated into processor
Interfaces
2 x Intel Gigabit Ethernet (RJ45, teaming-capable)
6 x USB 3.0: 4 x at the rear, 2 x at the front
5 x USB 2.0: 4 x rear, 1 x internal e.g. for software dongle with optional interlocking
2 x DisplayPort V1.2, 1 x DVI-D, 1 x COM1, 2 x PS/2