SIPLUS SB 1222 digital output modules . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SIPLUS SB 1222 digital output modules

| | | | | | |

SIPLUS SB 1222 digital output modules

Article number	6AG1222-1AD30-5XB0	6AG1222-1BD30-5XB0
	SIPLUS S7-1200 SB 1222 4DQ 5VDC	SIPLUS S7-1200 SB 1222 4DQ 24VDC
General information
Product type designation	SB 1222 4xDQ 5VDC 200kHz	SB 1222 4xDQ 24VDC 200kHz
Input current
from backplane bus 5 V DC, typ.	50 mA	50 mA
Output voltage
Power supply to the transmitters
? Supply current, max.	4 mA; per channel	4 mA; per channel
Power loss
Power loss, typ.	1 W	1 W
Digital outputs
Number of digital outputs	4	4
? in groups of	1	1
Switching capacity of the outputs
? with resistive load, max.	0.1 A	0.1 A
Load resistance range
? upper limit	5 ?	10 ?
Output voltage
? Rated value (DC)	5 V	24 V
? for signal "0", max.	0.4 V	0.1 V; with 10 kOhm load
? for signal "1", min.	L+ (-0.5 V)	20 V
? for signal "1", max.	6 V
Output current
? for signal "1" rated value	0.1 A	0.1 A
? for signal "1" permissible range, max.	0.11 A
? for signal "0" residual current, max.		10 µA
Cable length
? shielded, max.	50 m	50 m
Interrupts/diagnostics/status information
Alarms	Yes	Yes
Diagnostic functions	Yes	Yes
Diagnostics indication LED
? for status of the outputs	Yes	Yes
Degree and class of protection
Degree of protection acc. to EN 60529
? IP20	Yes	Yes
Standards, approvals, certificates
CE mark	Yes
Ambient temperature during operation
? min.	-40 °C; = Tmin; Startup @ -25 °C	-40 °C; = Tmin; Startup @ -25 °C
? max.	60 °C; = Tmax; Tmax > 55 °C number of simultaneously activated outputs 2 (no adjacent points) for horizontal mounting position	60 °C; = Tmax; Tmax > 55 °C number of simultaneously activated outputs 2 (no adjacent points) for horizontal mounting position
Extended ambient conditions
? relative to ambient temperature-atmospheric pressure-installation altitude	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
Relative humidity
— With condensation, tested in accordance with IEC 60068-2-38, max.	100 %; RH incl. condensation / frost (no commissioning in bedewed state), horizontal installation	100 %; RH incl. condensation / frost (no commissioning in bedewed state), horizontal installation
Resistance
— against biologically active substances / conformity with EN 60721-3-3	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!
— against chemically active substances / conformity with EN 60721-3-3	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
— against mechanically active substances / conformity with EN 60721-3-3	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Mechanics/material
Enclosure material (front)
? Plastic	Yes	Yes
Dimensions
Width	38 mm	38 mm
Height	62 mm	62 mm
Depth	21 mm	21 mm
Weights
Weight, approx.	40 g	40 g