SIPLUS Control Units . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SIPLUS Control Units

| | |

SIPLUS Control Units

Order number		6AG1244-0BB12-2FA0	6AG1244-0BB12-2PA1
product brandname		SIPLUS
Product designation		Controller
General technical data:
Design of the product		CU240E-2 PN	CU240E-2 DP
Product function
? vector control with encoder		No
? vector control without encoder		Yes
Product function for U/f control
? ECO mode linear or quadratic		Yes
? flux current control		Yes
? linear or quadratic parameterization		Yes
Operating voltage
? from external supply voltage	V	28.8 ... 20.4
? from power module	V	24
Input voltage at analog inputs as voltage inputs
? for signal <0> to <1>	V	4
? for signal <1> to <0>	V	1.6
Consumed current maximum	A	0.5
AWG number as coded connectable conductor cross section for signal line		30 ... 16
Power loss [W] maximum	W	5.5
Protection class IP		IP20
Width	mm	73
Height	mm	199
Depth	mm	46
Net weight	kg	0.49
Inputs/ Outputs:
Type of analog input		Differential input
? Note		Switchable between voltage (-10 ... +10 V) and current (0/4 ... 20 mA) using a DIP switch
Number of analog inputs		2
? Note		The differential analog inputs can be configured as supplementary digital inputs
Number of digital inputs		6
? Note		Optically isolated, free reference potential (own potential group), NPN/PNP-logic selectable via wiring
Number of digital inputs with fail-safe		1
? Number of digital inputs with fail-safe Note		Use of 2 ? DI Standard
Number of digital outputs as relay change-over contact		2
Number of digital outputs as transistor		1
Communication:
Number of interfaces
? acc. to RS 485		0	1
? acc. to PROFINET		2	0
Protocol is supported PROFIBUS protocol		No	Yes
Ambient conditions:
Relative humidity maximum	%	100
? Note		RH, incl. condensation/frost permitted (no commissioning in bedewed state)
Ambient temperature
? during operation		-20 ... +55
? during storage		-40 ... +70
Ambient temperature [°F]
? during operation		-4 ... +131
— Note		A derating of 3 K/1000 m has to be applied to the Control Units from an installation altitude of 1000 m above sea level
? during storage		-40 ... +158
Resistance to biologically active substances conformity acc. to EN 60721-3-3		Yes
Resistance to biologically active substances		Class 3B2 acc. to EN 60721-3-3, mold and fungal spores (except fauna)
? conformity acc. to EN 60721-3-3 Note		The supplied plug covers must remain in place over the unused interfaces during operation!
conformity acc. to EN 60721-3-3		Yes
Resistance to chemically active substances		Class 3C4 acc. to EN 60721-3-3, including salt spray acc. to EN 60068-2-52 (severity level 3)
? conformity acc. to EN 60721-3-3 Note		Compliant with EN 60721-3-3, Class 3C4 incl. salt spray in accordance with EN 60068-2-52 (severity 3); the supplied plug covers must remain in place on the unused interfaces during operation.
Resistance to mechanically active substances conformity acc. to EN 60721-3-3		No
Certificate of suitability		CE / TUV
Certificate of suitability for CE marking		Low-voltage directive 2006/95/EC