Current requirement, max. At 24 V DC without taking account of the digital outputs and DRIVE-CLiQ supply | 0.5 A |
- Conductor cross-section, max.
| 2.5 mm2 |
| 20 A |
Digital inputs In accordance with IEC 61131?2 Type 1 | |
| -3 ... +30 V |
- Low level
(an open digital input is interpreted as "low")
| -3 ... +5 V |
| 15 ... 30 V |
- Current consumption at 24 V DC, typ.
| 9 mA |
- Delay times of digital inputs 1), approx.
| |
| 50 ?s |
| 100 ?s |
- Conductor cross-section, max.
| 1.5 mm2 |
Digital outputs (continuously short-circuit proof) | |
| 24 V DC |
- Load current per digital output, max.
| 100 mA |
- Total current of digital outputs, max.
| 400 mA |
- Delay times of digital outputs 1)
| |
| 150 ?s with 0.5 A resistive load |
| 500 ?s |
- Conductor cross-section, max.
| 1.5 mm2 |
Analog inputs (a switch is used to toggle between voltage and current input) | |
| |
| -10 ... +10 V |
| 100 k? |
| 11 bits + sign |
| |
| 4 ... 20 mA, -20 ... +20 mA, 0 ... 20 mA |
| 250 ? |
| 10 bits + sign |
- Conductor cross-section, max.
| 1.5 mm2 |
Analog outputs (continuously short-circuit proof) | |
| -10 ... +10 V |
| -3 ... +3 mA |
| 4 ... 20 mA, -20 ... +20 mA, 0 ... 20 mA |
| 500 ? in the range -20 ... +20 mA |
| 11 bits + sign |
- Conductor cross-section, max.
| 1.5 mm2 |
Relay outputs (CO contacts) | |
| 8 A |
- Operational voltage, max.
| 250 V AC, 30 V DC |
| |
| 2000 VA (cos ? = 1) 750 VA (cos ? = 0.4) |
| 240 W (resistive load) |
| 100 mA |
- Conductor cross-section, max.
| 2.5 mm2 |
Power loss, max. | 10 W |
PE connection | M4 screw |
Dimensions | |
| 50 mm (1.97 in) |
| 150 mm (5.91 in) |
| 111 mm (4.37 in) |
Weight, approx. | 0.49 kg (1.08 lb) |
Certificate of suitability | cULus |