|
| | | | | | |
SIPLUS TM PosInput 2 position detection module- Uniform display and diagnostics concept:
- Module status display for ERROR (red LED) and RUN (green LED)
- Channel status display for signal state log. "0" and log. "1" (green LED) or diagnostics display (red LED)
- Display for monitoring the 24 V DC supply voltage (green LED)
- Display of counter activity
- Counting:
- High-speed counting up and down, up to a signal frequency of 1 MHz
- Counting range adjustable up to +/- 31 bits
- Position detection with incremental encoder
- Saving or setting of the count with digital input
- Connection of SSI encoders
- Position recording with SSI encoders with a frame length of 10 to 40 bits
- Position value up to 31 bits long
- Hiding or showing of additional status bits in the SSI frame
- Measuring of the current speed
- Storing of the current position value with digital input (capture)
- Measuring:
- Measuring the current frequency
- Output of the measured value as cycle duration
- Output of the measured value as speed in various units
- Settable updating time for smoothing agitated measurement signals
- Supported functions:
- Integrated digital inputs and outputs for high-speed response
- 2 comparators per channel for controlling the digital outputs
- Hardware interrupts, parameterizable
- Isochronous mode
- User-friendly configuration through instructions and technology objects
- 24 V and 5 V encoder supply
- Uniform system functions of SIMATIC S7-1500 and ET 200MP:
- Identification and maintenance data
- Firmware update
- Unambiguous labeling on front of module
- Uniform front connector
|
|
