Mass flowrate, volume flowrate, density, process temperature, fraction flow
Up to four output/input channels selected at ordering
Outputs can be individually configured with mass, volume, density etc.
Three built-in totalizers which can count positive, negative or net flows
Low flow cut-off, adjustable
Density cut-off or empty pipe cut-off, adjustable
Flow direction adjustable
Alarm system consisting of alarm-log, alarm pending menu
Internal data logger is updated each 10 minutes with operational data such as system health, totalizer values, all configurations and data needed for custody transfer requirements to OIML R 117 and NTEP.
Display of operating time with real-time clock. Daylight saving time is not implemented
Uni/bidirectional flow measurement
Flowrate outputs are freely configurable between maximum negative and maximum positive flows according to the sensor capacity
Limit switches programmable for flow, density, temperature or fraction process values. Limit points can be graded as warning and alarm for values both above and below nominal process conditions
Process noise filter for optimization of measurement performance under non-ideal application conditions. 5-stage pumping filter compensates for flow fluctuations caused by e.g. single acting piston pumps
Full dosing controller with 5 user-configurable recipes
Automatic zero adjustment menu, with zero point evaluation display
Full service menu for effective and straight forward application and meter troubleshooting
Precise temperature measurement ensures optimum accuracy on massflow, density and fraction flow.
Fraction flow computation is based on a 5th-order algorithm matching known applications. All standard fraction calculations fit within 0.1 % of the true value.
