? Basic execution time of the module (all channels released)
1 ms
Smoothing of measured values
? Number of smoothing levels
4; None; 4/8/16 times
4; None; 4/8/16 times
6; none; 2-/4-/8-/16-/32-fold
7; none; 2-/4-/8-/16-/32-/64-fold
? parameterizable
Yes
Yes
Yes
Yes
Encoder
Connection of signal encoders
? for voltage measurement
No
No
Yes
Yes
? for current measurement as 2-wire transducer
Yes
Yes
Yes
Yes
— Burden of 2-wire transmitter, max.
650 ?
650 ?
650 ?
? for current measurement as 4-wire transducer
Yes
Yes
Yes
Errors/accuracies
Basic error limit (operational limit at 25 °C)
? Voltage, relative to input range, (+/-)
0.05 %; 0.1 % at SFU 4.8 kHz
0.2 %
? Current, relative to input range, (+/-)
0.3 %
0.3 %
0.05 %; 0.1 % at SFU 4.8 kHz
0.2 %
Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency
? Series mode interference (peak value of interference < rated value of input range), min.
70 dB
60 dB
? Common mode voltage, max.
10 V
35 V
35 V
? Common mode interference, min.
90 dB
90 dB
90 dB
Isochronous mode
Isochronous operation (application synchronized up to terminal)
No
No
Yes
Yes
Filtering and processing time (TCI), min.
800 µs
80 µs
Bus cycle time (TDP), min.
1 ms
125 µs; Starting from firmware Version V2.0.1
Interrupts/diagnostics/status information
Diagnostics function
Yes
Yes
Yes
Alarms
? Diagnostic alarm
Yes
Yes
Yes
Yes
? Limit value alarm
No
Yes
Yes; two upper and two lower limit values in each case
Yes; two upper and two lower limit values in each case
Diagnostic messages
? Monitoring the supply voltage
Yes
Yes
Yes
? Wire-break
Yes; at 4 to 20 mA
Yes; channel by channel
Yes; Measuring range 4 to 20 mA only
Yes; channel-by-channel, at 4 to 20 mA only
? Short-circuit
Yes; 2-wire mode: Short-circuit of the encoder supply to ground or of an input to the encoder supply
Yes; Channel-by-channel, short-circuit of the encoder supply to ground or of an input to the encoder supply
Yes; channel-by-channel, at 1 to 5 V or for short-circuit in encoder supply
Yes; channel-by-channel, at 1 to 5 V or for current measuring ranges short-circuit in encoder supply
? Group error
Yes
Yes
Yes
Yes
? Overflow/underflow
Yes
Yes; channel by channel
Yes
Yes
Diagnostics indication LED
? Monitoring of the supply voltage (PWR-LED)
Yes; Green LED
Yes; green PWR LED
Yes; green PWR LED
Yes; green PWR LED
? Channel status display
Yes; Green LED
Yes; Green LED
Yes; Green LED
Yes; Green LED
? for channel diagnostics
No
Yes; Red LED
Yes; Red LED
Yes; Red LED
? for module diagnostics
Yes; Green/red LED
Yes; green/red DIAG LED
Yes; green/red DIAG LED
Yes; green/red DIAG LED
Potential separation
Potential separation channels
? between the channels and backplane bus
Yes
Yes
Yes
Yes
Isolation
Isolation tested with
707 V DC (type test)
707 V DC (type test)
707 V DC (type test)
707 V DC (type test)
Standards, approvals, certificates
Suitable for safety functions
No
No
No
Dimensions
Width
15 mm
15 mm
15 mm
15 mm
Height
73 mm
73 mm
73 mm
73 mm
Depth
58 mm
58 mm
58 mm
58 mm
Weights
Weight, approx.
31 g
31 g
32 g
32 g
Article number
6ES7134-6JF00-0CA1
6ES7134-6JD00-0CA1
ET 200SP, AI 8XRTD/TC 2-WIRE HF
ET 200SP, AI 4XRTD/TC 2-/3-/4-WIRE HF
General information
Product type designation
ET 200SP, AI 8x RTD/TC 2-wire HF, PU 1
ET 200SP, AI 4x RTD/TC 2-/3-/4-wire HF, PU 1
Product function
? I&M data
Yes; I&M0 to I&M3
Yes; I&M0 to I&M3
Engineering with
? STEP 7 TIA Portal configurable/integrated as of version
V13
V12 SP1 / V13
? STEP 7 configurable/integrated as of version
V5.5 / -
V5.5 SP3 / V5.5 SP4
? PCS 7 configurable/integrated as of version
V8.1 SP1
? PROFIBUS as of GSD version/GSD revision
GSD Revision 5
GSD Revision 5
? PROFINET as of GSD version/GSD revision
GSDML V2.3
GSDML V2.3
Operating mode
? Oversampling
No
No
? MSI
No
No
CiR – Configuration in RUN
Reparameterization possible in RUN
Yes
Yes
Calibration possible in RUN
Yes
Yes
Supply voltage
Type of supply voltage
DC
DC
Rated value (DC)
24 V
24 V
Reverse polarity protection
Yes
Yes
Analog inputs
Number of analog inputs
8
4
permissible input voltage for voltage input (destruction limit), max.
30 V
30 V
Constant measurement current for resistance-type transmitter, typ.
2 mA
0.7 mA; 1.7 mA for Cu10 sensors
Cycle time (all channels), min.
Sum of the basic conversion times and additional processing times (depending on the parameterization of the active channels)
Sum of the basic conversion times and additional processing times (depending on the parameterization of the active channels); for line compensation in case of a three-wire connection, an additional cycle is necessary
Technical unit for temperature measurement adjustable
