SINAMICS G120C compact inverters . Характеристика. Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SINAMICS G120C compact inverters

| | | | | | | | | | |

SINAMICS G120C compact inverter

Derating data

Pulse frequency

Rated power based on low overload (LO)		Rated output current in A for a pulse frequency of
kW	hp	4 kHz	6 kHz	8 kHz	10 kHz	12 kHz	14 kHz	16 kHz
0.55 ¹⁾	0.75	1.7	1.4	1.2	1	0.9	0.8	0.7
0.75 ¹⁾	1	2.2	1.9	1.5	1.3	1.1	1	0.9
1.1 ¹⁾	1.5	3.1	2.6	2.2	1.9	1.6	1.4	1.2
1.5 ¹⁾	2	4.1	3.5	2.9	2.5	2.1	1.8	1.6
2.2 ¹⁾	3	5.6	4.8	3.9	3.4	2.8	2.5	2.2
3 ¹⁾	4	7.3	6.2	5.1	4.4	3.7	3.3	2.9
4 ¹⁾	5	8.8	7.5	6.2	5.3	4.4	4	3.5
5.5	7.5	12.5	10.6	8.8	7.5	6.3	5.6	5
7.5	10	16.5	14	11.6	9.9	8.3	7.4	6.6
11	15	25	21.3	17.5	15	12.5	11.3	10
15	20	31	26.4	21.7	18.6	15.5	14	12.4
18.5	25	37	31.5	25.9	22.2	18.5	16.7	14.8

¹⁾ The permissible motor cable length depends on the cable type and the pulse frequency.

Ambient temperature

High overload (HO) and low overload (LO)

Note:

The PROFINET version can be butt-mounted at temperatures up to 55 °C (131 °F). At temperatures between 55 °C (131 °F) and 60 °C (140 °F), side-by-side mounting is not possible.

Installation altitude

Permissible line supplies depending on the installation altitude

Installation altitude up to 2000 m (6562 ft) above sea level
- Connection to every supply system permitted for the inverter
Installation altitudes between 2000 m (6562 ft) and 4000 m (13124 ft) above sea level
- Connection to a TN system with grounded neutral point
- TN systems with grounded line conductor are not permitted
- The TN line system with grounded neutral point can also be supplied using an isolation transformer
- The phase-to-phase voltage does not have to be reduced

Note:

The connected motors, power elements and components must be considered separately.

Permissible output current as a function of installation altitude

Line voltage

Permissible output current as a function of line voltage

Permissible rated power as a function of line voltage