Frame sizes 090 - 355 mm (area of standard motors)
Power range: (50 Hz types)
Up to 220 kW (thermally utilized according to temperature class B at TU = 40 °C)
Number of poles:
2 - 8 pole; also higher pole numbers for special versions Pole changing2 speeds, e.g. 4/2, 6/4, 8/4, 8/6
Voltage range:
Low voltage up to 1000 V8
Rated voltages:
All of the usual low-voltages and voltage ranges according to IEC 60038. However, also: Non-standard voltages and / or frequencies according to customer specifications.
Operating mode:
S1
Degree of protection:
IP55, IP56, to IP66
Cooling type:
IC 411
Type of construction:
IM B3 IM B5, IM B35, IM V1, IM V3, IM V5, IM V18, IM B14, IM B34 (special)
Enclosure:
Gray cast iron
Bearings:
Ball bearings
Standards:
IEC, EN, DIN, VDE
Types of protection:
"e" as well as dust explosion protection according to EN 50281-1-1 / EN 50281-1-2
Noise level:
All motors are noise-optimized (noise limit values according to EN 60034-9), low-noise version possible for 2-pole motors (GG3)
Features
Options:
Regreasing system from FS 160 - SPM nipple from FS 132 - stainless steel screws/bolts - larger connection system
Additional terminal box from FS 132 - anti-condensation heating from FS 132 - condensation water drain from FS 132
PTC thermistor or Pt100 as additional protection (TMS)
Can also be supplied for 60 Hz (adapted winding - increased power rating)
All motors with insulating material class H
All motors are available with an electrical design according to "NEMA Standards Publication No MG1"
Flanged motors can be designed and implemented with flange and shaft end in accordance with NEMA
Special versions e.g. for:
Special shaft end, backstop, special paint finishes
Low temperatures down to -60 °C
Available in temperature class T4 and also for increased ambient temperatures
